• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1098-1101
• /
• 2004

The ordinary stereo image of an object consists of data of left and right views. Therefore, the left and right image pairs have to be transmitted simultaneously in order to display 3-dimentional video at the remote site. However, due to the twice data in comparing with a monoscopic image of the same object, it needs to be compressed for fast transmission and resource saving. Hence, it needs an effective coding algorithm for compressing stereo image. It was found previously that compressing left and right frames independently will achieve the compression ratio lower than compressing by utilizing the spatial redundancy between both frames. Therefore, in this paper, we study the stereo image compression technique based on the multiresolution wavelet transform using varied disparity-block size for estimation and compensation. The size of disparity-block in the stereo pair subbands are scaling on a coarse-to-fine wavelet coefficients strategy. Finally, the reference left image and residual right image after disparity estimation and compensation are coded by using SPIHT coding. The considered method demonstrates good performance in both PSNR measures and visual quality for stereo image.

• Journal of the Optical Society of Korea
• /
• v.19 no.4
• /
• pp.334-339
• /
• 2015

Terabit-per-second (Tb/s) transmission capacity for the next generation of long-haul communication networks can be achieved using multicarrier optical super-channel technology. In an elastic orthogonal frequency division multiplexing (OFDM) super-channel transmission system, demultiplexing a portion of an entire spectrum in the form of a subband with minimum power is critically required. A major obstacle to achieving this goal is the analog-to-digital converter (ADC), which is power-hungry and extremely expensive. Without a proper ADC that can work with low power, it is unrealistic to design a 100G coherent receiver suitable for a commercially deployable optical network. Discrete Fourier transform (DFT) is often seen as a primary technique for understanding partial demultiplexing, which can be attained either optically or electronically. If fairly comparable performance can be achieved with an all-optical DFT circuit, then a solution independent of data rate and modulation format can be obtained. In this paper, we investigate two distinct OFDM super-channel receiver models, based on electronic and all-optical DFT-technologies, for partial carrier demultiplexing in a multi-Tb/s transmission system. The performance comparison of the receivers is discussed in terms of bit-error-rate (BER) performance.

• Plant Biotechnology Reports
• /
• v.3 no.1
• /
• pp.87-93
• /
• 2009

To determine whether pattern recognition based on metabolite fingerprinting for whole cell extracts can be used to discriminate cultivars metabolically, leaves and fruits of five commercial strawberry cultivars were subjected to Fourier transform infrared (FT-IR) spectroscopy. FT-IR spectral data from leaves were analyzed by principal component analysis (PCA) and Fisher's linear discriminant function analysis. The dendrogram based on hierarchical clustering analysis of these spectral data separated the five commercial cultivars into two major groups with originality. The first group consisted of Korean cultivars including 'Maehyang', 'Seolhyang', and 'Gumhyang', whereas in the second group, 'Ryukbo' clustered with 'Janghee', both Japanese cultivars. The results from analysis of fruits were the same as of leaves. We therefore conclude that the hierarchical dendrogram based on PCA of FT-IR data from leaves represents the most probable chemotaxonomical relationship between cultivars, enabling discrimination of cultivars in a rapid and simple manner.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.11a
• /
• pp.187-188
• /
• 2006

With development of global network in the 21th century, Korea has recklessly accepted western culture occurred damages to our identity. Development of traditions in a modern way contribute us Korea identity and future vision. This study has studied about combination traditional material and contemporary material with a view to diversified user's desires and individuality. This object shows that function and decoration coexist together, and design reflects mans life and thinking of the age as a reflection of sociocultural phenomena. The purpose of this work to create the object that meets mans requirement and even foresees the possibility of such requirement through converting into various appearances. Different concepts including closed singleness and expansion within open structure coexist one element. also this objects suggest that transformative expressions that simplify or transform, the forms can be freely changed by consumer's emotional changes. Here, light and form are experimented for creating diversified emotions. Considering design as positively responding behavior against the limitations given by environment instead of the solution to simple functional requirement, future design will find Its value more In more active response.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.162-162
• /
• 2011

표면파 속도 측정은 근래 토목분야에서는 비파괴 지반조사기법으로 활용되고 있다. 최근에는 디지털 신호처리기술의 발달과 함께, 더욱 정확해진 자료분석 알고리즘을 통하여 표면파 탐사관련 기술이 향상되어 3차원의 공간연속적인 시험이 가능해졌다. 본 연구는 표면파의 분산 특성을 이용하여 콘크리트 구조물의 깊이별 강성평가를 하는 SASW(Spectral Analysis of Surface Waves)기법과 STFT(Short time Fourier Transform)과 HWT(Harmonic Wavelet Transform)를 이용한 주파수영역에서의 공진주파수를 통한 부재평가 기법인 IE(Impact Echo)기법을 이용하여 대상부재의 강도평가를 수행하기 위한 시제품 개발을 수행하였다. 시제품은 메인프레임과 2개의 센서로 이루어져 측정을 수행하며 측정장치와 DAQ장치 및 S/W로 구성되어 있다. 메인프레임의 진동특성영향을 제거하기 위하여 2개의 센서는 프레임과 띄움구조로 설계하였고 센싱하는 위치는 대상 재료의 밀착되어 계측할 수 있도록 설계하였다. 탄성파를 계측하여 대상 재료의 깊이별 측정된 표면파의 속도를 계측하며 개발된 시제품의 구조물별 적용성 평가를 위한 실험을 수행하였고 평균 표면파 속도를 통해 추정한 콘크리트 두께와 결함 및 강도 추정의 적용성을 평가하였다. 시제품을 이용해 시험콘크리트 표면파를 측정한 결과 SASW기법을 이용하여 깊이에 대한 위상속도 분포와 IE기법의 결과로 개발된 시제품의 합리적 적용성이 평가되었다. 그러나 재료의 강도추정에 있어서는 각각 알고리즘의 주파수분석 요소들에 의해 변동되는 경향을 보여 추후 많은 테스트를 통해 속도-강도 추정의 회귀곡선식을 S/W에 탑재시키고 다양한 방법으로 조합하는 알고리즘으로 신뢰성있는 강도추정을 위한 알고리즘을 개발하여야 한다.

• Computational Structural Engineering
• /
• v.8 no.4
• /
• pp.129-136
• /
• 1995

This paper presents a boundary element method for obtaining approximate solutions of 2-dimensional consolidation problems based on the Biot's linear theory. Laplace transform is applied to differential equation system in order to eliminate the time dependency. The boundary integral equations in transformed space are formulated and the fundamental solutions are shown in a closed form. In order to convert the transformed solutions to the ones in real space, the Hosono's numerical Laplace transform inversion method is applied. As a numerical example, a half-space consolidation problem subjected to a strip local load is selected and the applicability of the method is demonstrated through the comparison with the exact solutions.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.124-131
• /
• 1997

There have been many demands for th ereal-time image compression. The image compression systems have a wide range of applications. However, real-time encoding is hard to implement because it needs a large amount of computations. In particular, the discrete cosine transform (DCT) and motion estimatio require a large number of arithmetic oeprations compared to other algorithms in MPEG-2. The conventional fasdt DCT algorithms have focused on the reduction of the number of additions more cycles and more expense in realization. Because TMS320C80 has special structure, new approach for implementation of DCT is suggested. The selection of adaptive algorithm and optimization is requried TMS320C80 are analyzed an dsome adaptive DCT algorithms are selected. The DCT algorithms are optimized and implemented. Chens and lees DCT algorithms among various fast algorithms are selected because 1-D approach is effective in the view of th einternal structure of TMS320C80. According to the simulation result, Lees algorithm is more effective in speed and has little difference in precision. On the basis of the result, the possibility of DCT implementation for real-time MPEG-2 system is verified and the required number of the processor, called advanced DSP, is decided for real-time MPEG-2 encoding and decoding.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.6
• /
• pp.759-763
• /
• 2004

In this paper, real-time voice change method using pitch change technique is proposed to change one's voice to the other voice. For this purpose, sampling rate change method using DFT (Discrete Fourier Transform) method and time scale modification method using SOLA (Synchronized Overlap and Add) method is combined to change pitch. In order to evaluate the performance of the proposed method, voice transformation experiments were conducted. Experimental results showed that original speech signal is changed to the other speech signal in which original speaker's identity is difficult to find. The system is implemented using TI TMS320C6711DSK board to verify the system runs in real time.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.277-284
• /
• 1993

Interfacial surface crack perpendicular to the surface, which is imbedded into bonded quarter planes under single anti-plane shear load is analyzed. The problem is formulated using Mellin transform, form which single Wiener-Hopf equation is derived. By solving the equation stress intensity factor is obtained in closed form. This solution can be used as a Green's function to generate the solutions of other problems with the same geometry but of different loading conditions.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.8
• /
• pp.39-46
• /
• 1998

One of the main techniques for diagnosing heart disease is by examining the electrocardiogram(ECG). Many studies on detecting the QRS complex, P, and T waves have been performed because meaningful information is contained in these parameters. However, the earlier detection techniques can not effectively extract those parameters from the ECG that is severely contaminated by noise source. In this paper, we performed the extracting parameters from and recovering the ECG signal using wavelets transform that has recently been applying to various fields.