• Journal of applied mathematics & informatics
• /
• v.27 no.3_4
• /
• pp.763-771
• /
• 2009

T.H. Kim, H.K. Xu, [Convergence of the modified Mann's iteration method for asymptotically strict pseudo-contractions, Nonlinear Anal.(2007),doi:l0.l016/j.na.2007.02.029.] proved the strong convergence for asymptotically strict pseudo-contractions by the classical CQ iterative method. In this paper, we apply the monotone CQ iterative method to modify the classical CQ iterative method of T.H. Kim, H.K. Xu, and to obtain the strong convergence theorems for asymptotically strict pseudo-contractions. In the proved process of this paper, Cauchy sequences method is used, so we complete the proof without using the demi-closedness principle, Opial's condition or others about weak topological technologies. In addition, we use a ingenious technology to avoid defining that F(T) is bounded. On the other hand, we relax the restriction on the control sequence of iterative scheme.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.5
• /
• pp.517-524
• /
• 1992

In this study, 0.10Pb(SbS11/2TSnS11/2T)OS13T-(0.90-x)PbZrOS13T (0.25 x 0.40) ceramics were fabricated by the atmospheric method. The sintering temperature and time were 1250[$^{\circ}C$] and 2[2hr], respectively. The structureal, dielectric and piezoelectric properties with composition of PbTiOS13T were studied. As the results of XRD ans SEM, the crystal structure of a specimen was rhombohedral, lattice constant and average grain size were decreased with increasing the contents of PbTiOS13T. Relative dielectric constant and Curie temperature were increased with increasing the contents of PbTiOS13T, 0.10PSS-0.40PT-0.50PZ specimen had the highest values of 904 and 265[$^{\circ}C$], respectively. In increasing of PbTiOS13T contents form 25[mol%] to 40[mol%], piezoelectric charge constant and electromechanical coupling factors were increased form 114[pC/N] to 142[pC/N], 17[%] to 24[%] and mechanical quality factor were decreased with increasing the contents of PbTiOS13T. In the 0.10PSS-0.40PT-0.50PZ specimens, those values were 14.2[kV/cm] and 9.43[x10S0-6TC/cmS02T], resectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1565-1566
• /
• 2013

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2004.11a
• /
• pp.76-76
• /
• 2004

• English & American cultural studies
• /
• v.9 no.1
• /
• pp.1-25
• /
• 2009

This paper attempts to illuminate the significance of the myth or mythical method used in The Waste Land, which Eliot adapted from Jessie L. Weston's From Rituals to Romance and Sir James Frazer's Golden Bough. While he was composing a modern epic, James Joyce's Ulysses and Igor Stravinsky's Le Sacre du Printemps made him sure that the mythical method would be the best way to make the non-relational and chaotic modern world into a work of art. Although he accepted F. H. Bradley's epistemology that one's actual experience is non-relational, he strongly put an emphasis on 'the unified sensibility' in John Donne's poetry with which a poet changes all the dissociated material into art. He also found another effective method to give the chaotic experiences an order, and to make them modern art: the mythical method in his contemporary anthropology. With the mythical method he incorporated the various barren, horrible and ugly aspects of modern world into a new unity in The Waste Land. In addition, he embraced his contemporary anthropological theory that a primitive life described in myths is a culture just different from modern culture, and heartily employed some aspects of primitive culture to make modern poetry as well as modern culture rich and exuberant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.126-130
• /
• 1995

$CdS_{1-x}Te_{1-x}$ polycrystalline thin films were fabricated from CdS and CdTe powder by co-evaporation method at $10^{-6}$ Torr. The Optimum evaporation condition was substrate temperature $T_{s}$=$150^{\circ}C$, evaporation time t=30 min. XRD spectrums indicated that the crystal structure chanced from zinc blonde (x$\leq$0.22) to wurtzite (x$\geq$0.96) through mixed structure (0.22$\leq$0.74) as composition value x increase to CdS. Conductive type was n-type by hot point probe method. van der Pauw method was not applicable for x<0,5 due to high hall voltages, Electrical resistivity and Hall carrier mobility were decreased as x increase, while Hall carrier concentration was increased. The optical bandgap of $CdS_{1-x}Te_{1-x}$ polycrystalline thin films measure d at R.T. had quardratic form and the bowing parameter was fitted as 1.98eV for theoretical value of 2.0eV. I-V characteristics of In/CdTe/$CdS_{x}Te_{1-x}$Au Schottky diodes showed that CdS-rich one had better forward characteristics than CdTe-rich one.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.9
• /
• pp.827-832
• /
• 2012

In this paper, we will design the speed measurement board of LEO Satellite's reaction wheel which has two speed measuring methods as M-Method type and T-Method type. therefore we can use the advantage of two methods. and we will verify the availability of design on the on-board computer at the real LEO Satellite(KOMPSAT-3). In the reaction wheels satellite that can change the satellite's attitude is one of the leading drivers by the rotational inertia of the motor will perform attitude control. Reaction methods for detecting wheel rotation speed generated during a certain period T internal reaction wheel tacho pulse counting M-Method to detect wheel speed and wheel tacho pulses are generated by measuring the time between the detection rate can be divided into T-Method. M-method is simple to implement and benefit measurement time is constant, but slow fall in the velocity measurement accuracy is a disadvantage. In contrast, the time between tacho pulses to measure the T-Method to measure the precise speed at low speed and to measure the time delay is small, has the advantage. However, this method also in the actual implementation and the complexity of the operation at different speeds depending on the speed of operation has the disadvantage.

• Journal of Internet of Things and Convergence
• /
• v.2 no.4
• /
• pp.35-39
• /
• 2016

This paper is about IoT(Internet of Things)-based indoor localization scheme. GPS and WiFi are widely used to estimate the location of things. However, GPS has drawback of poor reception and radio disturbance in doors. To estimate the location in WiFi-based method, the user collects the information by scanning nearby WiFi(s) and transferring the information to WiFi database server. This is a fingerprint method with disadvantage of having an additional DB server. IoT is the internetworking of things, and this is on rapid rise. I propose the IoT-based indoor localization scheme. Under the proposed method, a device internetworking with another device with its own location information like GPS coordinate can estimate its own location through RSSI. With more devices localizing its own, the localization accuracy goes high. The proposed method allows the user to estimate the location without GPS and WiFi DB server.

• Structural Engineering and Mechanics
• /
• v.19 no.4
• /
• pp.459-475
• /
• 2005

This paper deals with a novel application of the Generalized Differential Quadrature (G.D.Q.) method to the linear elastic static analysis of isotropic rotational shells. The governing equations of equilibrium, in terms of stress resultants and couples, are those from Reissner-Mindlin shear deformation shell theory. These equations, written in terms of internal-resultants circular harmonic amplitudes, are first put into generalized displacements form, by use of the strain-displacements relationships and the constitutive equations. The resulting systems are solved by means of the G.D.Q. technique with favourable precision, leading to accurate stress patterns.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1601-1603
• /
• 2003

Investigated about topology of each component of transformer and material choice method and property in this paper. Component of transformer is bobin winding, insulating paper, Varnish etc. And experiment and investigated special quality by primary winding of transformer and composition of secondary winding. Investigated loss of transformer and EMI decrease method. Investigated method to select winding size that consider frequency.