• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.169-174
• /
• 2011

This paper provides Bus Information System(BIS) implementation based on the Smart-phone APPs using GPS information. Nearly all of recent smart-phones are equipped with the GPS feature. Bus driver's smart-phone can send the position information using its GPS information periodically and on events. On receiving those information, servers can process those into the information that can be used by individual users and bus stop information panel. The proposed BIS based on smart-phone APPs is expected to be used publicly with the special process that enables the smart-phone APPs only in the specific bus.

• International Journal of Safety
• /
• v.3 no.1
• /
• pp.53-58
• /
• 2004

SMART-P is a promising advanced small and medium category nuclear power reactor. It is an integral type reactor with a sensible mixture of new innovative design features and proven technologies aimed at achieving a highly enhanced safety and improved economics. The enhancement of the safety and reliability is realized by incorporating inherent safety improving features and reliable passive safety systems. The improvement in the economics is achieved through a system simplification, and component modularization. Preliminary safety analyses on selected limiting accidents confirm that the inherent safety improving design characteristics and the safety system of SMART-P ensure the reactor's safety. SMART-P is an advanced integral pressurized water reactor. The purpose of this study is for the safety analysis of the steam generator module pipe break for the SMART-P. The integrity of the fuel rod is the major criteria of this analysis. As a result of this analysis, the safety of the RCS and the secondary system is guaranteed against the module pipe break of a steam generator of the SMART-P.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.4
• /
• pp.613-620
• /
• 2017

The power grid has been changed to a smart grid system to satisfy the growing need for power grid complexity, demand, reliability, security, and efficiency with a combination of existing power and ICT technology. This study analyzes the research trends in smart grid technology in the period since the introduction of the smart grid system and compares it with industrial trends to grasp the progress and characteristics of Smart Grid technology and look for ways to innovate the technology. To do this, we analyze the research trends using dynamic topic modeling, which is capable of time-series research topic analysis. Next, we compare the results of research trends with industrial trends analyzed by Gartner's experts to demonstrate that smart grid research is evolving to the level of industrialization. The results of this study are quantitative analysis through data mining, and it is expected that it will be used in many fields such as companies that want to participate in industry and government agencies that need to establish policies by showing more objective analysis results.

• Journal of IKEEE
• /
• v.19 no.4
• /
• pp.472-478
• /
• 2015

When user wants to receive a smart safe return service, user sends a service request using a smart device to support GPS location data. After the smart safe return system receives the location of user, it selects the neighboring CCTV cameras based on user's location information, and controls the selected CCTV cameras to take a picture of the user, and to chase the user automatically. This service can be useful when there is a crime-ridden district on the path to return home late at night. Previous systems can't provide the smart safe return service to multiple user simultaneously. In this paper, we propose the smart safe return system which can provide the service to multiple users simultaneously.

• Journal of the Korean Society of Safety
• /
• v.37 no.5
• /
• pp.22-32
• /
• 2022

The domestic smart factory is being built and spread rapidly, mainly by mid-sized companies and large enterprises according to the government's active introduction and support policy. But these factories only promote production system and efficiency, so harmfulness and risk factors are not considered. Therefore, to derive harmful risk factors in terms of industrial safety for 12,983 government-supported smart factory workplaces from 2014 to 2019, industrial accident status analysis compared workplaces with automation facilities and government-supported workplaces with automation facilities. Also, to reduce risks associated with domestic smart factory processes, twenty government-supported workplaces with automation facilities underwent analysis, evaluating risks through a status survey using the process evaluation table. In addition, the status survey considered region, size, industry, construction level, and accident rate; the difference in risk according to the structure of the process was confirmed. Based on the smart factory process evaluation results, statistical analysis confirmed that serial, parallel, and hybrid structures pose different risk levels and that the risks of mixed structures are greater. Finally, safety control system application was presented for risk assessment and reduction in the smart factory process, reflecting the results of disaster analysis and actual condition investigation.

• Convergence Security Journal
• /
• v.14 no.4
• /
• pp.85-94
• /
• 2014

Information Security Check System was Introduced in 2004, higher than in 2013, the effectiveness of Information Security Management System(ISMS) certification scheme was to unification. This is incident to the Internet affecting people's lives telecommunications service provider to target accountability because, considering the subject's duty selection criteria need to be clarified. however, Obligations under the current legislation, subject selection criteria applying the law itself is ambiguous, the result being a significant problem. Moreover, the regulatory system of certification systems subjects, although selection criteria should be clear and objectively not the obligation not to distrust the system itself and the subject was raised many issues for you. In this study, with SMART Technic in order to improve this certification you can easily determine whether a medical person authorized to develop a model for selection of medical subjects, The developed model is verified through empirical ways to improve the system by presenting the system to help, to secure the effectiveness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1727-1730
• /
• 2003

A windshield wiper system plays a key part in assurance of driver's safety at rainfall. However, because quantity of rain and snow vary irregularly according to time and velocity of automotive, a driver changes speed and operation period of a wiper from time to time in order to secure enough visual field in the traditional windshield wiper system. Because a manual operation of windshield wiper distracts driver's sensitivity and causes inadvertent driving, this is becoming direct cause of traffic accident. Therefore, this paper presents the basic architecture of vision-based smart windshield wiper system and the rain sensing algorithm that regulate speed and operation period of windshield wiper automatically according to quantity of rain or snow. Also, this paper introduces the fuzzy wiper control algorithm based on human's expertise, and evaluates performance of suggested algorithm in simulator model. In especial, the vision sensor can measure wide area relatively than the optical rain sensor. hence, this grasp rainfall state more exactly in case disturbance occurs.

• Journal of Digital Convergence
• /
• v.17 no.7
• /
• pp.115-124
• /
• 2019

This study is an empirical study of 'the effect of the key factors of Smart Factory on management performance through internal environmental factors in small and medium enterprises'. The purpose of the research is to verify that the implementation of a Smart Factory affects the performance of management and contribute to the continued development of the company, and to suggest the national policy of expanding the deployment of a Smart Factory. The procedures were surveyed by working-level officials of small and medium-sized manufacturing companies with a Smart Factory and statistically analyzed with the SPSS and SMART PLS. The results of the study showed that first, the environmental factors within the company had a positive effect on the key components of the Smart Factory. Second, the key factor in Smart Factory has had a positive impact on management performance. The above evidence shows that the key factors in smart factory considering the environmental factors of an enterprise affect its management performance, thus laying the theoretical foundation for the performance of smart factory construction. In the future, we will study how to build a Smart Factory.

• The KIPS Transactions:PartC
• /
• v.17C no.1
• /
• pp.37-46
• /
• 2010

In an IPTV system, the rights of the content and service provider can be protected by using Conditional Access System (CAS) and Digital Right Management (DRM). In case of the CAS, only the authorized user who has structured authentication keys can decrypt the encrypted content. However, since the CAS establishes a secure channel only between content provider and Smart Card (SC), it cannot protect the system against McCormac Hack attack which eavesdrops on unsecure channel between SC and Set-Top Box (STB) and SC cloning attack. In this paper, we propose a robust multi-STB assisted SC / STB authentication protocol which can protect the IPTV system against not only McCormac Hack attack, but also SC cloning attack. The previous works which bind a STB and a SC during the SC registration phase against the SC cloning attack does not support multi-STB environments. The proposed system which dynamically updates the STB information in subscriber management system using the bi-directional channel characteristic of IPTV system can support the user's multi-STB device effectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.375-376
• /
• 2012