• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.860-868
• /
• 2011

Feistel and SPN are the two main structures in a block cipher. Feistel is a symmetric structure which has the same structure in encryption and decryption, but SPN is not a symmetric structure. In this paper, we propose a SPN block cipher so called SSB which has a symmetric structure in encryption and decryption. The proposed SSB is composed of the even numbers of N rounds. Each round consists of a round key addition layer, a subsitution layer, a byte exchange layer and a diffusion layer. The subsitution layer of the odd round is inverse function of one of the even round. And the diffusion layer is a MDS involution matrix. The differential and linear attack probability of SSB is $2^{-306}$ which is same with AES. The proposed symmetric SPN block cipher SSB is believed to construct a safe and efficient cipher in Smart Card and RFID environments which is in limited hardware and software resources.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06a
• /
• pp.38-39
• /
• 2010

수도권 대중교통 이용자는 2004년 서울시의 대중교통 체계 개편에 따라 교통 카드를 사용하여 버스와 지하철을 이용하게 되었다. 교통 카드를 사용하는 각 승객의 승차와 하차에 관한 데이터가 하나의 트랜잭션으로 구성되고, 하루 천만 건 이상의 트랜잭션들로 구성된 대용량 교통카드 트랜잭션 데이터베이스가 만들어지고 있다. 대중교통을 이용하는 승객들의 승차와 하차에 관한 여러 정보를 담고 있는 교통카드 트랜잭션 데이터베이스에서 유용한 패턴이나 정보를 탐사해내는 연구가 계속 진행되고 있다. 이런 연구 결과는 수도권 대중교통 정책을 입안하는데 중요한 기초 자료가 되고 수도권 승객들에게 대중교통을 보다 잘 이용할 수 있는 정보로 제공된다. 교통카드 이용률은 2006년 79.5%, 2007년 80.3%, 2008년 81.6%로 점차적으로 증가하고 있다. 대용량의 교통카드 트랜잭션 데이터베이스에 대한 연구를 살펴보면 하루 동안의 교통카드 트랜잭션 데이터베이스에서 순차 패턴을 탐사하는 알고리즘을 연구하였고[1], 승객들의 통행 패턴에 대한 분석연구를 확장하여 일 년에 하루씩 2004년에서 2006년까지 3일간의 교통카드 트랜잭션 데이터베이스로부터 승객 시퀀스의 평균 정류장 개수와 환승 횟수 등을 연도별로 비교하였다[2]. 수도권 지하철 시스템의 특성에 관한 연구로는 네트워크 구조 분석이 있었고[3], 승객의 기종점 통행 행렬(Origin-Destination trip matrix)에 의한 승객 흐름의 분포가 멱함수 법칙(power law)임을 보여주는 연구가 있었고[4], 지하철 교통망에서 모든 링크상의 승객들의 흐름을 찾아내는 연구가 있었다[5]. 본 논문에서는 교통카드 트랜잭션 데이터베이스에서 지하철 승객들의 통근 패턴을 탐사해내는 방법을 연구하였다. 수도권 지하철 네트워크에 대한 정보를 입력하고 하루치의 교통카드 트랜잭션 데이터베이스에 연구된 방법을 적용하여 8가지 통근 패턴들을 탐사해내고 분석하였다. 탐사된 패턴들 중에서 많은 승객들이 지지하는 출퇴근 패턴에 대해서는 시간대별로 승객수를 그래프로 보여주었다.

• Journal of Advanced Navigation Technology
• /
• v.17 no.4
• /
• pp.421-428
• /
• 2013

Voice over IP refers to technology that enables routing of voice conversations over the Internet or a TCP/IP network. VoIP communication costs cheaper than traditional analog phone. Phone calls can be made to anywhere / anyone: Both to VoIP numbers as well as people with normal phone numbers. VoIP protocol equipment available today follows the SIP standard. Older VoIP equipment though would follow H 323, MGCP, Megaco/H.248. A SIP server is the main component of an IP PBX, dealing with the setup of all SIP calls in the TCP/IP network. A SIP server is also referred to a Asterisk IP-PBX. A VoIP telephone, also known as a SIP phone or a softphone, allows the user to make phone calls to any softphone, mobile or PC by using App store. A VoIP telephone can be a simple software-based softphone. However, the SIP Server and the program is vulnerable to VoIP attacks. In this paper, eavesdropping attacks tested by using the Asterisk SIP server. Eavesdropping attacks and TLS security methods apply to VoIP system. TLS can be applied to determine whether the eavesdropping available for VoIP Environments.

• Journal of Digital Contents Society
• /
• v.18 no.7
• /
• pp.1341-1346
• /
• 2017

In this paper, we designed the open service platform based on integrated type of individual customized service and intelligent information technology with individual's complex attributes and requests. First, the data collection phase is proceed quickly and accurately to repeat extraction, transformation and loading. The generated data from extraction-transformation-loading process module is stored in the distributed data system. The data analysis phase is generated a variety of patterns that used the analysis algorithm in the field. The data processing phase is used distributed parallel processing to improve performance. The data providing should operate independently on device-specific management platform. It provides a type of the Open API.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.53-60
• /
• 2017

This paper is to design and implement the drone that supports a wideband multimedia communication and a long-range to save people in maritime. The drone is an Unnamed Aerial Vehicle (UAV) that is controlled by a radio wave not by people boarding the machine. We use the drone to respond quickly to the boating accident. To develop a smart drone for the high speed seamless video streaming in a long-range maritime, a necessary techniques are hardware design techniques that design structure of a drone, controlling techniques that operate a drone and communication techniques that control a drone in a long distance. In this paper, the limitations and techniques to design and implement the structure of drone supporting wideband multimedia communication for long-range maritime are explained. By expanding this communication drone network, it is aimed at improving utility of a drone.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.63-66
• /
• 2015

As smart-phones become popular, mobile data traffic has been dramatically increasing and intensive researches on the next-generation mobile communication network is in progress to meet the increasing demand for mobile data traffic. In particular, heterogeneous network (HetNet) is attracting much interest because it can significantly enhance the network capacity by increasing the spatial resue with macro and small cells. In the HetNet, we have several problems such as load imbalance and interference because of the difference in transmit power between macro and small cells and cell range expansion (CRE) can mitigate the problems. In this paper, we propose a new cell selection scheme with adaptive cell range expansion bias (CREB) for ultra dense HetNet and we analyze the performance of the proposed scheme in terms of average cell transmission rate through system-level simulations and compare it with those of other schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.12
• /
• pp.842-855
• /
• 2014

Recently, the progress of smart phone market has retarded by oversupply therefore wearable computer has been the focus of new growth engine. Wearable computing system is a complex fusion of a variety of technologies such as wireless network, embedded, sensor and new material. Because these technologies involves utilization and mobility in addition to quality characteristic in existing software, application of ISO/IEC 9126 is not perfect when assessing quality of wearable computer. In this study, author suggested new quality assessment model for wearable computer by sorting quality attribute in ISO/IEC 9126 and adding new quality attribute. For this, author investigated features and functional requirements related to wearable computer. and then author suggested quality standard and metrics by identifying quality characteristic. Author confirmed practicality of quality assessment model by using suggested model in scenario and comparing quality assessment of three goods such as company S, L, G. This quality assessment model is expected to use guidelines for assessing quality of wearable computer.

• The Journal of the Convergence on Culture Technology
• /
• v.2 no.4
• /
• pp.77-82
• /
• 2016

IoT technology was selected as one of IT 10 strategic technologies by gartner from 2013 to 2015, and implements advanced smart society while enabling interaction between people and things. Because IoT devices are connected to the Internet, they are involved in issues including exposure of private lives, for example, hacking to result in wireless signal interference, data theft, data modification and forgery and service denial, and critical security issues including threat to national confidential information and facilities. This study aims to suggest a method for examining threats to security through IP exposure of IoT devices and examining related problems to minimize threats to security through IP exposure including exposure of private lives or damages to the national infrastructure system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.665-668
• /
• 2012

This paper describes research results that 2-D contents, which display in smart phone or tablet PC to be able to see the 3-D stereoscopic by use projection technique. For this research, we have construct four brown-glass into pyramid shape, project each of the four LCD monitors that output from the PC screen into of the four inverted pyramid-shaped mirror and display the 3-D image to the center of the mirror system. For the test, We use tablet PC and server PC(desktop PC) connected by wireless network, tablet PC select contents which is displayed in the server PC, and displayed selected contents into the 3-D image to the center of the mirror system. Through the test, we have showed that it is possible to display 3-D stereoscopic to the 2-D contents by use projection technique. Although, display image is depending on the observer's viewing angle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.475-481
• /
• 2019

The importance of performance-based design feedback is being emphasized when it comes to the potential impact that affects all the lifecycle of the building. However, the latency and disconnection of domain expert in the sector of AEC/FM remain current obstacles between design and performance feedback. It is hard to utilize performance feedback information for design exploration and support design decision making during the conceptual phase of design. Using parametric design, this paper proposes various design alternatives from a set of rules and constraints defined by algorithms for the geometric configurations of an Office Building. A Building Performance Analysis (BPA) was to developed using Autodesk® Revit® 2019 which integrates Autodesk® Green Building Studio® to predict its sufficient daylighting conditions of the LEED v4's Daylighting Autonomy (DA). The parametric-based performance feedback of this study outlines potential design improvements for further exploration in application to the early design process.