• 환경위생공학
• /
• 제8권2호
• /
• pp.25-48
• /
• 1993

International concern over the environmental pollution is ever increasing, and diversified countermeasures must be devised in Korea also. Global trend, damages, problems and countermeasures with respect to issues mentioned in the Rio Declaration, such as prevention of ozone layer destruction, reduction of migratory atmospheric pollution between neighboring countries, and prevention of global greenhouse effect, were discussed in this report. Conclusion of the report is summarized as follows : A. Measurement, Planning and Monitoring (1) Development and implementation of a global network for measurement and monitoring from the global aspects such factors as related to acid rain(Pioneer substances, pH, sulfate, nitrate), effect of global temperature(Air temperature, $CO_2$, $CH_4$, CFC, $N_2O$) and destruction of ozone layer($CFC_S$). (2) Establishment of network system via satellite monitoring movement of regional air mass, damage on the ozone layer and ground temperature distribution. B. Elucidation of Present State (1) Improvement and development of devices for carbon circulation capable of accurately forecasting input and output of carbon. (2) Developmental research on chemical reactions of greenhouse gas in the air. (3) Improvement and development of global circulation model(GCM) C. Impact Assessment Impact assessment on ecosystem, human body, agriculture, floodgate, land use, coastal ecology, industries, etc. D. Preventive Measures and Technology Development (1) Development and consumption of new energy (2) Development of new technology for removal of pioneer substances (3) Development of substitute matter for $CFC_S$ (4) Improvement of agriculture and forestry means to prevent the destruction of ozone layer and the greenhouse effect of the globe (5) Improvement of housing to prevent the destruction of ozone layer and the greenhouse effect of the globe (6) Development of new technology for probing underground water (7) Preservation of forest (8) Biomass 5. Policy Development (1) Development of strategy model (2) Development of long term forecast model (3) Development of penalty charge effect and expense evaluation methods (4) Feasibility study on regulations By establishing the above mentioned measures for environmentally sound and sustainable development to establish the right to live for humankind and to preserve the one and only earth.

• 한국농촌건축학회논문집
• /
• 제15권1호
• /
• pp.1-11
• /
• 2013

The Gongju Sanseong Traditional Market, the subject of this study, was formed in the early 1900's, and along with the development of Gongju, it has been constantly changed and expanded up until now. The Sanseong Traditional Market located in Gongju, the Korea's representative historic city, exhibits merits in the aspects as a city based on the symbolic significance of the city where it is located and historical characteristics; however, it also presents some problems as well in consideration of user convenience and accessibility. Thereupon, this study conducted literature review on traditional markets, field research with a field trip, and a survey in order to analyze the spatial characteristics of the market environment and grope for the methods of activation. The conclusion suggested through this is as written below: First, the changes of types regarding spatial use according to the modernization project of traditional markets are essential, so about the spatial use according to the spatial changes, it is needed to distribute it balancedly considering the central space of the market. Second, with the understanding of the spatial types of traditional markets, it is needed to build a plan for alternation in the types of physical space based on that. Third, it is necessary to suggest the methods of integrated spatial use among standing markets and 5-day markets. In particular, through the approaches from the aspects of architectural and urban design and through reasonable spatial planning, a systematic approach considering the convenience of the users and merchants using it as their living space should be prioritized. And lastly, it is needed to reorganize the space according to the physical and non-physical methods in order to figure out the methods of activating traditional markets in agricultural areas and minor cities. With the complex approaches above, we can grope for the methods of activating traditional markets.

• 한국음향학회지
• /
• 제20권3호
• /
• pp.63-69
• /
• 2001

본 논문에서는 자연스러운 얼굴 합성을 위한 코퍼스 기반의 립싱크 알고리듬을 제안한다. 립싱크 알고리듬을 개발하기 위하여 여성 아나운서의 시청각 코퍼스를 구축하였다 코퍼스 구축시, 입술파라미터 추출하기 위하여 여성화자의 얼굴에 스티커를 붙이고, 이의 위치를 영상처리기법에 의하여 얻었다. 그리고 길이, 세기 그리고 피치의 운율정보를 얻기 위하여 음성을 HTK (hidden Markov tool kit)를 사용하여 레이블 하였다. 립싱크의 기본단위로는 자음-모음-자음의 음절단위를 사용하였는데, 구축된 시청각 코퍼스는 입술의 정보 그리고 음운론적, 운율적 정보를 포함하는 음절들로 구성된다. 입술합성시에는 입력된 텍스트로부터 음절의 열을 만들고 각 음절에 적절한 대표들을 코퍼스로부터 N개씩 선정후, 최적의 열은 비터비탐색을 통하여 얻었다. 이를 위하여 음운론적 거리와 운율거리 함수가 정하였다. 컴퓨터 모의실험결과 제안된 알고리듬이 좋은 성능을 보임을 확인할 수 있었으며, 특히 립싱크에서는 길이정보뿐 아니라 길이와 피치의 정보도 유용함을 밝혔다.

• Journal of Welding and Joining
• /
• 제23권3호
• /
• pp.68-75
• /
• 2005

The fatigue life of welded joints is associated with crack initiation and propagation life. Theses cannot be easily separated, since the definition of crack initiation is vague due to the initiation of multiple cracks that are distributed randomly along the weld toes. In this paper a method involving a notch strain and fracture mechanical approach, which considers the characteristics of welded joints, e.g. welding residual stress and statistical characteristics of multiple cracks, is proposed, in an attempt to reasonably estimate these fatigue lives. The fatigue crack initiation life was evaluated statistically, e.g. the probability of failure occurrence in 2.3, 50 and $97.7\%$, in which the cyclic response of the local stress/strain hi the vicinity of the weld toes and notch factors derived by the irregular shape of the weld bead are taken into account. The fatigue crack propagation life was simulated by using Monte-Carlo method in consideration of the Ad-factor and the mechanical behavior of mutual interaction/coalescence between two adjacent cracks. The estimated total fatigue life, $(N_T)_{P50\%}$, as a sum of crack initiation and propagation life under the probability of failure occurrence in $50\%$ showed a good agreement with the experimental results. The developed technique for fatigue lift estimation enables to provide a quantitative proportion of crack initiation and propagation life in the total fatigue life due to the nominal stress range, ${\Delta}S$.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제20권10호
• /
• pp.534-542
• /
• 2014

멀티스케일 모델링은 시공간적으로 서로 다른 규모의 시스템을 다룰 수 있는 시뮬레이션 기법이다. 본 연구에서는 멀티스케일 모델링 연구의 일환으로 서로 다른 시뮬레이션 기법인 분자동역학과 확률회전동역학을 결합할 수 있는 방법을 제안한다. 분자동역학 프로그램 중 잘 알려진 오픈 소스인 LAMMPS를 기반으로 멀티스케일링 모델링을 구현하였으며 LAMMPS에서 정의한 제3자를 위한 표준 확장 방법을 따랐다. 제안된 방법에서는 확률회전동역학 모델을 기본으로 경계 영역은 분자동역학으로 해석 가능하게 하였고 심리스한 해석을 보장하기 위하여 중첩 영역과 정보 교환 영역을 함께 구현하였다. 예비실험을 수행한 결과, 제안된 멀티스케일 방법론이 기존 분자동역학 시뮬레이션 결과와 일치된 해석 결과를 보여주었으며 실행 시간 또한 단축시킬 수 있음을 확인하였다.

• 한국통신학회논문지
• /
• 제35권11A호
• /
• pp.1059-1065
• /
• 2010

최근 아날로그 라디오 방송에서 고품질 오디오 및 영상을 포함한 부가데이터 서비스가 가능한 디지털 멀티미디어방송 방식으로의 전환이 급격히 이루어지는 추세에 있다. 디지털라디오란 기존의 FM/AM 라디오를 디지털 신호로 전송하는 것으로 보다 깨끗한 음질과 교통, 날씨정보 등 다양한 부가 서비스를 제공할 수 있다는 장점이 있다. 이 밖에도 라디오가 디지털로 전환되면 갈수록 늘어나는 FM 주파수에 대한 수요도 충족시킬 수 있을 것으로 기대하고 있다. 본 논문에서는 동일 주파수 대역에서 Digital FM Radio 시스템의 수신 전계 강도를 이용하여 디지털 라디오 방송의 간섭영향을 분석하였고, 간섭신호의 송신 출력과 희망신호의 송선 출력에 따른 Digital FM Radio 수신기의 전파 간섭 영향을 분석하였다, Digital FM Radio 수신기의 최소전계강도식과 ($S/(N_o+I)$)의 식을 유도하여 Digital FM Radio의 환경을 모의실험에 적용하여 결과를 확인하였다.

• 한국재난정보학회 논문집
• /
• 제9권4호
• /
• pp.439-448
• /
• 2013

2013년 3월 22일부터 시행된 개정 <경범죄처벌법>은, 제3조 제1항 제41호에 "지속적괴롭힘"이라는 표제로 "상대방의 명시적 의사에 반하여 지속적으로 접근을 시도하여 면회 또는 교제를 요구하거나 지켜보기, 따라다니기, 잠복하여 기다리기 등의 행위를 반복"하는 것을 스토킹 행위로 규정하였다. 이러한 스토킹 행위의 가해자에게는 <경범죄처벌법 시행령>에 따라 8만원의 범칙금이 부과되고 있다. 그러나 나날이 교묘해지고 다양해지는 스토킹 범죄의 심각성에 비해 현행 <경범죄처벌법>의 적용이 과연 실효성이 있는가의 문제가 존재한다. 스토킹을 직접적으로 규제하고 있는 현행 <경범죄처벌법>이 가지는 한계점을 극복하고 스토킹 범죄에 보다 적절히 대응하여야 할 것이다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.590-592
• /
• 1997

Making physical models of human body is not only time-consuming but also very expensive since they are usually hand-made. This problem is doubled with implant fabrication because an implant is almost always custom-made. Recently, RP is emerging as an alternative, and many RP applications are proposed in the medical field. The major advantage of this approach is due to a significant reduction of both time and cost required or the production. However, the technology is not much in practical use yet, especially in Korea. In this paper, we provide a method of generating STL files that are the standard format to RP machines. The original data are obtained from two-dimensional slices of MRI/CT machine. Example bone models have been produced using a commercially available RP machine, and the results are presented.

• 대한수의학회지
• /
• 제45권2호
• /
• pp.155-161
• /
• 2005

Proteomics is a useful approach to know protein expression, post-translational modification and protein function. We investigated the protein expression pattern and identity in chickens fed with the tissue culture medium waste after harvest of Korean wild ginseng (TCM-KWG) (Panax ginseng). Two groups (n=60/group) of day old broiler chickens were administered with 0 (control) and 0.8% (treatment) TCM-KWG through drinking water. After 5 weeks, we examined the protein expression pattern of fibularis longus and superficial pectoral muscle by Two-dimensional electrophoresis analysis. Interestingly, TCM-KWG treatment significantly increased five spot's density, and markedly reduced five spot's density in the muscles. We identified 10 proteins (desmin, myosin light chain 1, heat shock 25 kDa protein, collapsin response mediator protein-2A, alpha enolase, vimentin, actin alpha 1, my023 protein, pyruvate kinase and troponin T) by the matrix-assisted laser desorption ionization time of flight (MALDI-TOF).

• 한국분무공학회지
• /
• 제5권3호
• /
• pp.17-26
• /
• 2000

The main parameter commonly used to evaluate spray distribution is spray angle. Spray angle is important because it influences the axial and radial distribution of the fuel. Spray angles were measured and compared for the two non-air assisted injectors such as 2hole-2stream 4hole-1stream injectors used for port fuel injection gasoline engines with n-heptane as a fuel by three different measuring techniques, i.e., digital image processing, shadowgraphy, and spray patternator, respectively. Fuel was injected with the injection pressures of 0.2-0.35 MPa into the room temperature and atmospheric pressure environment. In digital image processing approach, the selection of the transmittance level is critical to obtain the edge of spray and hence to measure the spray angle. From the measurement results by the shadowgraphy technique, it is dear that the spray angle is varied during the spray injection period. The measurement results from spray patternator show that the different spray angles exist in different region. Spray angle increases with the increase in the injection pressure. it is suggested that the spray angle and stream separated angle should be specified when spray is characterized for 2hole-2stream injector, because spray angle is much different though stream separated angle is same. It was also considerably affected by the measurement techniques introduced in this experimental work. However, the optimal axial distance for measuring the spray angle seems to be at least 60-80 mm from the injector tip for two non-air assisted injectors.