• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.108-113
• /
• 2004

According to our fatigue tests carried out at 20 Hz, R=0.1 on transversely butt~welded joints, fatigue strengths of as-welded specimens, that is, specimens having residual stress are higher than those of annealed specimens in short life range, but vice verse in long life range. This behavior seems to be concerned mainly with residual stress relaxation by applied loading. After analyzing the welding process, we conducted finite element analysis to quantify the degree of residual stress relaxation. By taking into account residual stress relaxation, modified Goodman diagram, and nominal stress, we evaluated the fatigue life of the welded joint from the S-N curve for the parent material. The estimated results are in a good agreement with the experimental results.

• 한국유체기계학회 논문집
• /
• 제16권4호
• /
• pp.15-21
• /
• 2013

This study aims to estimate the fatigue resistance of small wind composite blade using the fatigue life estimation formula in the GL guideline. For this, firstly, we estimated a turbine blade's bending moment spectrum by using wind profile wind profile and BEMT. And fatigue tests were performed to obtain the S-N curve of composite materials used in blade. In addition, a finite element analysis was used to identify fatigue critical locations and fatigue stress spectrum. And the fatigue resistance of composite blade were evaluated using the rainflow cycle counting, and Goodman diagram and the fatigue life estimation formula in the GL guideline.

• 한국통신학회논문지
• /
• 제18권2호
• /
• pp.207-217
• /
• 1993

본 논문에서는 송신된 확산부호와 수신기 내의 기준 확산부호 사이의 위상차에 대한 사전 확률을 알고 있을 때, 동기가 맞을 확률이 높은 셀부터 낮은 셀의 순서로 검사하는 Expanding Window Search 방법을 이용하여 직접확산(Direct Sequence) 통신 시스팀의 초기동기 과정의 상태도를 구성한다. 각 검색에서 앞선 검색 때보다 증가하는 윈도우를 초항이 a고 공비가 r인 등비 수열의 형태로 증가하도록 하였으며, 마코프처리(Markov process)와 메이슨 이득공식(Mason’s gain formula)을 이용하여 상태도를 해석하고 평균 시간을 구한다. 그리고 검색 횟수 n과 검출 확률 $P_d$의 변화에 따른 평균동기 시간의 증감을 사전 확률이 없을 때의 평균등기 시간과 비교한다.

• 대한전자공학회논문지TC
• /
• 제49권1호
• /
• pp.73-77
• /
• 2012

본 논문에서는 차세대 초전도 핵융합 연구장치의 상태 진단 및 점검을 위한 마이크로파 진단 시스템에 적용하기 위한 광대역 대역 통과 여파기를 설계하였다. 광대역 특성 및 낮은 손실과 높은 스컷 특성을 위해 메타 전자파 구조를 적용하였다. 제안된 광대역 대역 통과 여파기는 한국형 핵융합 원자로의 마이크로파 진단 시스템 내에서 전압제어 발진기의 출력 단에 적용되어 전압제어 발진기에서 발생되는 고조파 성분들을 제거하여 시스템의 선형성을 개선하는 역학을 한다. 광대역 대역 통과 여파기는 18-28 GHz의 대역을 통과 시키고 그 외 대역에서 .20 dB 이하의 저지 특성을 갖도록 설계하였다. 메타 전자파 구조 특성 확인을 위해 위상의 분산도를 확인하였으며 통과 대역의 하측 대역에서 LH 특성을 갖으며 그 외 대역에서는 RH 특성을 보이도록 설계하였다. 제안된 광대역 대역 통과 여파기의 군지연 (Group Delay)의 경우 0.5 nS 이하로 매우 우수한 특성을 보였다.

• 열처리공학회지
• /
• 제27권1호
• /
• pp.15-22
• /
• 2014

This study is to investigate the phase changes and cold workability after isothermal transformation at $780^{\circ}C$ by using the high temperature gas nitrided (HTGN) STS 430 ferritic stainless steel specimens. The phase diagram of STS 430 steel obtained by calculation showed that the phase appeared at $1100^{\circ}C$ showed as ${\alpha}+{\gamma}{\rightarrow}{\gamma}{\rightarrow}{\gamma}+Cr_2N{\rightarrow}{\gamma}+Cr_2N+CrN$ with increasing nitrogen concentration. Also, the transformation of ${\gamma}{\rightarrow}Cr_2N$ during heat treatment isothermally at $780^{\circ}C$, nitrogen pearlite with lamellar type was fully formed at the nitrogen permated surface layer for 10 hrs. However, this transformation was not completed for 1 hr, resulting nitrogen pearlite plus martensite. The cold rolled specimen of isothermally transformed at $780^{\circ}C$ for 10 hrs after high temperature gas nitriding decreased the layer thickness of nitrogen pearlite inducing the deformation of hard $Cr_2N$ phase. the dissolution rate of $Cr_2N$ phase increased rapidly with increasing cold rolling ratio. Specimens with the microstructure of nitrogen pearlite (isothermally transformed at $780^{\circ}C$ for 10 hrs) were possible to cold rolling without crack formation. However, the mixed structures of nitrogen pearlite + martensite (isothermally transformed at $780^{\circ}C$ for 1 hr) were impossible to cold deformation without cracking.

• 한국수산과학회지
• /
• 제3권3호
• /
• pp.154-160
• /
• 1970

우리나라 서해안의 참조기를 대상으로 1967년 6월부터 1968년 5월 사이의 자료에서 체장, 체중 및 인문(鱗紋)조사를 실시하며 다음의 결과를 얻었다. 1. 윤문은 연 1회 형성되고, 형성 시기는 $4\~7$월로, Bae(1960)가 발표한 산란기와 일치되고 있다. 2. 윤군(輪群)별 각 윤경(輪徑)적 평균 성장률은 0.73이었다. 3. 체장(total length)과 인경(鱗徑)과의 관계는 직선 회귀로, 그 관계식은 다음과 같다. L=61.350R+50.184 4. 체중과 체장(total length)과의 관계는 지수 곡선으로 다음과 같다. $$W=4.298L^{3.227}\times10^{-3}$$ 5. Walford의 정차도에 의하여 산출된 이론적인 최대 체강은 346.9mm이었고, 그 관계식은 다음과 같다. $$L_{n+1}=0.6866L_n+10.8730$$ 6. 연령과 체장(total length)과의 관계를 von Bertalanffy의 성장 방정식에 적응시킨 결과 다음과 같았다. $$L_t=346.9(1-e^{-0.376(t+0.609)})$$

• International Journal of Automotive Technology
• /
• 제7권4호
• /
• pp.477-483
• /
• 2006

A vibration model of a helical gear pair for vehicle transmission is developed by considering the elastic deformation of the active teeth and the body to be a rigid. The main source of vibration in a helical gear system which caused by the mass unbalances of rotors and the transmission errors of gearings in mathematically formulated and applied to the analysis of vibration characteristics of geared systems. As an example, a simple geared system containing a helical gearing is considered. The critical speeds are found by the Campbell diagram and compared with the experimental results We expect this developed program to contribute to the reduction of the vibration and noise on vehicle a transmission in the field of both design and manufacturing. In addition, this program can be used as a basic program for CAD/CAM of low-noised gear teeth.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.161-167
• /
• 2001

The overhead transmission wires operating both at warm temperature and tighten state for a long period of time in a power transmission plant are degraded by air pollution, wind, creep and slip between steel wire and aluminium conductor. The objective of this study is to investigate to investigate the characteristics of fatigue properties with tension and bending loading of a high carbon steel wire. The fatigue behaviors have been carried out by tension-tension, 4 points bending and 3 points bending loading. In the present study, a conventional fatigue strengths between 4 points bending and tension-tension fatigue were determined by Gerber, Sorderberg and Goodmans theory and we investigated S-N diagram for bending and tensile loading.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.393-398
• /
• 2002

This study shows the fatigue test results of experiment on the strengthened slabs, the probability analysis of the fatigue behavior is also presented. Static und fatigue tests were performed on bridge decks strengthened with fiber plastics(Carbon Fiber Sheet, Glass Fiber Sheet, Grid Type Carbon Fiber). In this study, to analyze the probabilistic distribution of the fatigue life, the Weibull distribution was adopted. The Weibull distribution coefficient is inferred from the S-N diagram and the number of repeated load. As the result analysis, as the stress level is higher, the fatigue limit of the strengthened bridge deck are similarly discovered but in the range of the fatigue limit, CG specimen that was strengthened with Grid Type Carbon was proved most effective of reinforcement.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1328-1336
• /
• 2004

According to our fatigue tests carried out at 20 Hz, R=0.1 on transversely butt-welded joints, fatigue strengths of as-welded specimens, that is, specimens having residual stress are higher than those of annealed specimens in short life range, but vice verse in long life range. This behavior seems to be concerned mainly with residual stress relaxation by applied loading. After analyzing the welding process, we conducted finite element analysis to quantify the degree of residual stress relaxation. By taking into account residual stress relaxation, modified Goodman diagram, and nominal stress, we evaluated the fatigue life of the welded joint from the S-N curve for the parent material. The estimated results are in a good agreement with the experimental results.