• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2000년도 방송기술 워크샵
• /
• pp.139-148
• /
• 2000

국내 데이터방송 프로토콜 표준안 요약 .국제규격과의 호환성을 유지하기 위해 지상파(ATSC)와 위성(DVB) 규격을 별도로 정함. - 지상파 .T3/S13 : ATSC Data Broadcasting Standard .T3/S8 : PSIP(Program and System Information Protoc이) - 위성 .ETSI SN 301 192 : DVB Specification for Data B Broadcasting .ETSI EN 300 468 : Specification for SI(Service Information) i in DVB Systems 국내 규격 고유의 기능인 한글 처리 부분을 보완 또는 추가함 .

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.145-147
• /
• 2002

In this paper, the improved fault locating method using distributed parameter which calculating the reduced voltage and current according to the ground capacitance in long transmission line was proposed. For the purpose of the fault locating algorithm non influenced source impedance, the loop method was used in the system modeling analysis. To enhance the fault locating, zero sequence of the fault current which is variable according to ground capacitance was not used but positive and negative sequence. System model was simulated using EMTP software. To verify the accuracy of proposed method, in different cases 64 sampled data per cycle was used and 160km and 300km long transmission line has fault resistance $0{\Omega}\;and\;100{\Omega}$ respectively was compared.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.988-989
• /
• 2008

This paper describes a rapid pulsed power charging system for pulsed power application. It is capable of charging 35kJ/s energy up to 0.47uF 25kV within 3ms and maximum pulse repetition rate of 300 pps can be achieved. The charger is designed based on three-phase series resonant inverter followed by air cooled set-up transformers thus it has many advantages of lower weight, small size and high efficiency compared with large bulky traditional pulse charger system. Detail design procedure of resonant inverter and high voltage transformers is explained. Experimental results carried out at different condition and its results shows 90% efficiency at full load condition.

• 한국전기전자재료학회논문지
• /
• 제37권3호
• /
• pp.253-260
• /
• 2024

In this study, ITO thin films were fabricated on a glass substrate at different thicknesses without introducing oxygen using RF sputtering system. The structural, electrical, and optical properties were evaluated at various thicknesses ranging from 50 to 300 mm. As the thickness of deposited ITO thin film become thicker from 50 to 100 mm, carrier concentration, mobility, and band gap energy also increased while the resistivity and transmittance decreased in the visible light region. When the film thickness increased from 100 to 300 mm, the carrier concentration, mobility, and band gap energy decreased while the resistivity and transmittance increased. The optimum electrical properties were obtained for the ITO film 100 nm. After optimizing the thickness, the ITO thin films were post-annealed at different temperatures ranging from 100 to 300℃. As the annealing temperature increased, the ITO crystal phase became clearer and the grain size also increased. In particular, the ITO thin film annealed at 300℃ indicated high carrier concentration (4.32 × 10²¹ cm^-3), mobility (9.01 cm²/V·s) and low resistivity (6.22 × 10^-4 Ω·cm). This means that the optimal post-annealing temperature is 300℃ and this ITO thin film is suitable for use in solar cells and display application.

• 한국수자원학회논문집
• /
• 제55권spc1호
• /
• pp.1167-1175
• /
• 2022

본 연구에서는 노후도를 보다 간단히 평가할 수 있는 운영지수 분석법을 개발하였고 이를 기존의 노후도 분석법과 비교 분석하였다. 청주시 상수관망에 적용하여 노후도를 비교 분석하였으며 사용성을 입증하였다. 기존의 간접평가법 분석결과, 율량동(구시가지), 내덕1동, 용암2동 상수관망의 노후도가 가장 높은 것으로 분석되었으며, 신뢰성해석을 통한 안전도 분석 결과 내덕1동 상수관망이 직경 200 mm, 300 mm 강관 모두 파괴확률 3.21%, 4.65%로 안전도가 가장 취약한 것으로 분석되었다. 운영지수 분석법의 경우, 내덕1동 상수관망이 직경 200 mm, 300 mm 강관 모두 위험도 0.2609, 0.2644로 가장 높은 것으로 분석되었으며, 개량 우선순위는 비슷한 것으로 나타났다. 따라서 향후 운영지수 분석법을 통해 상수도관을 보다 간단하게 노후도를 분석하여 상수관망의 운영관리에 활용이 가능할 것으로 판단된다.

• 한국의류학회지
• /
• 제18권1호
• /
• pp.43-56
• /
• 1994

The Purpose of this study was to utilize of CAD System in pattern making process for women's apparel. The automation by the use of CAD System provides the higher accuracy and efficiency in pattern making process. AccuMark 300 System was used. for .this study. The results from this study were as follows . 1. New size spec chart and grading pitch chart were developed based on the data analysis and fitting tests for female college students. 2. New jacket block was developed based on the torso length sloper 3. Automatic grading of jacket block have been developed by creation and modification of grading rules of block pattern. 4. Pattern Design Systyem(P/D/S) were enabled to be constructed directly form a block pattern by modifications to existing styled pattern. 5. Original master pattern was generated by P/D/S menu option. 6. Production pattem added seam allowance, notchs was generated by P/D/S menu option. 7 Interative maker making process have enabled to save a wide range of time and space. 8. Measurement of garment by P/D/S measuring tools is to utilize in garment costing, quality control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.248-250
• /
• 2009

고효율 태양전지를 위한 결정질 태양전지의 구조 중 UNSW에서 개발한 BCSC(buried contact solar cell)가 있는데, 이는 전면 전극을 laser 처리 후 무전해 니켈 도금으로 형성한 것이다. 이같은 전면 전극을 형성하기 위해서는 무전해 nickel 도금 후 열처리가 필수적이다. 우리는 이 공정을 확립하기 위해 결정질 wafer에 후면을 PECVD로 SiNx막을 형성하여 $30\Omega/\square$로 도핑한 후 후면을 불산으로 제거한 상태에서 양면을 니켈 무전해 도금으로 전극을 형성하여 $300^{\circ}C,\;350^{\circ}C,\;400^{\circ}C$에서 각각 3,6,9분간 진행하였다. 그 결과 $400^{\circ}C$에서 3분간 열처리된 sample이 상대적으로 가장 명확한 IV curve를 형성하였다. 이 실험의 결과는 PN 접합 구조에서 전극을 nickel로 사용할 때 유용하게 사용될 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.892-899
• /
• 2009

This paper describes the design and fabrication of a soil resistivity measurement system using 9 auxiliary electrodes; 6 potential-, a reference-, a current-, and a ground- electrode. The measurement system is composed of a current source (300 [Vrms], 5 [A], Sine-wave, 45 $\sim$ 500 [Hz]), a data acquisition (400 [kS/s], 16 bit, 16 Ch.), and an operating program based on a graphical software of National Instrument Co. The proposed system is convenient for choosing the position of electrodes because the soil resistivity is calculated having no concern with the length and the spacing between electrodes.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권1호
• /
• pp.20-24
• /
• 2009

The superconducting property measurement system is used to acquire electrical and thermal properties on short HTS tape samples and the system is composed of specimen holder for mounting HTS tape and a magnet for applying magnetic fields externally. The magnet consists of two split racetrack windings and is designed to produce maximum 3T of center field. The temperature of specimen holder can be varied in range from 10K to 77K. The field homogeneity is required less than 300 gauss stray field contour within 20cm axially and 3cm radially from origin. We have worked on the conceptual designs of the conduction-cooled magnet for the superconducting characteristic measurement system. The measurement system will be fabricated in near future based on the design parameters presented in this paper.

• 센서학회지
• /
• 제20권5호
• /
• pp.300-304
• /
• 2011

Exhaled breath gases include gases generated in the body. When there is disease in the body, exhalation can include gas components from the disease. If we can find these specific elements through analysis of the exhalation gases, this can be an effective way to diagnose the disease. The lung has a close relationship with exhalation. Lung cancer refers to malignant tumors which originate in the lungs. Exhalation from the lung causes direct jets of gas to be ejected through the mouth and nose, so by analyzing these jets it may be possible to diagnose lung cancer. In our study we attempt to diagnose lung cancer from patient's exhaled gases. Exhalation of lung cancer patients was analyzed using gas chromatography-mass spectroscopy(GC-MS) and the expiratory gas was also measured using a sensor system. The system was designed to use a metal oxide sensor and solid phase micro extraction(SPME) fiber. The GC-MS analysis of the healthy subject's and cancer patient's exhalation gases both showed the presence of decane in the breath of patients with lung cancer. In addition, the results from the sensor system showed significant difference between the lung cancer patients and the healthy subjects.