• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.683-686
• /
• 2010

본 논문은 영상 내에서 영역을 분할하여 영상 잡음을 효과적으로 제거하는 기법을 제안한다. 제안한 방법을 통해 잡음 영상을 영역 분할 경우 잡음부분까지 영역 분할되는 문제가 발생하기 때문에 잡음 영상을 저대역(Low-pass) 필터를 통과함으로써 잡음을 최소화한다. 저대역 필터를 통과한 영상에서 에지를 추출하여 비정상적인 에지의 추출을 방지함으로써 영상이 가진 근본적인 에지를 정확하게 추출한다. 획득한 에지 정보를 바탕으로 각 영역간의 히스토그램의 평균 오차를 이용하여 영역을 분할한다. 분할된 영역은 각 영역별로 저대역(Low-pass) 필터를 통과시킴으로써 영역에 맞는 잡음 제거를 통해서 더욱 빠르고 효과적으로 제거한다. 본 논문의 방법은 기존의 학습을 통한 잡음 제거 방법과 다르게 학습 시간이 요구되지 않으며, Non-local Means의 방법과 다르게 큰 연산량을 요구하지 않기 때문에 유사한 성능으로 빠른 잡음 제거를 할 수 있다.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.845-847
• /
• 2000

깊은 생체 조직에서 전자기 에너지의 일부가 피부로 전달되는데, 이때 생체 내부에서 피부로 전달되는 전자기 에너지의 세기는, 주파수 대역과 전자기파를 흡수, 반사, 투과시키는 인체의 매질에 따라 다르다. Microwave Radiometry는 인체 내부 조직에서 방출되는 1-6 GHz 대역의 전자기 에너지 일부를 피부 표면에서 측정하여 일정한 체적내의 인체 내부 온도 평균온도를 추정하는 방법이다. 이러한 Radiometry로 암이나 종양 등의 이상 조직을 진단하는 의학적 가설은, 암이 진행시 악성 종양의 세포의 신진대사가 정상 세포보다 활발하게 되고 또한 종양 세포 주위로 혈액의 유입이 증가하게되어, 주위의 정상 세포 보다 열을 보다 더 방출하는 데 있다. 이때 발생된 열은 일정한 주파수 대역의 마이크로파 에너지를 방출하게 되고, 이에 Radiometry로 인체에 무해하고(passive), 비침습적(non-invasive), 방사능의 영향이 없는 (non-ionizing) 방법으로 인체 내부에서 전달되는 전자기 에너지 강도를 측정하여 종양 부위와 주위 정상부위의 온도 차이를 추정 의학진단에 응용할 수 있다. 본 논문에서는 이러한 Microwave Radiometry의 의학적 응용과 생리학적 특성을 고려한 인체모델용 팬텀에 대하여 살펴본다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.912-918
• /
• 2003

In this paper, we designed and implemented the dual band monopole antenna for cellular CDMA(Code Division Multiple Access) and IMT-2000(International Mobile Telecommunication 2000) repeater. The antenna was designed by using 3D simulations program, HFSS(High Frequency Structure Simulator). Electrical characteristics were measured by using HP 8720C network analyzer and measured maximum S$\_$11/ was -10.9 dB for all frequency bands of interests in Cellular CDMA and IMT-2000. Simulation results for antenna gain at 859 MHz and 2027.5 MHz were 2.38 dBi and 4.02 dBi respectively with omni directional radiation pattern. The size of implemented antenna is compact and the antenna can be produced in low cost enough for commercialization.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.2
• /
• pp.30-37
• /
• 2013

An extended loop antenna, to be continued BLA(Branch Loop Antenna) in the previous volume, for the mobile handset is designed in this paper. It's introduced an ELA(Extended Loop Antenna) that is added extended loops to rectangular loop, and verified antenna performances for applying to mobile handset. Extended loops are located upside, left and right side of rectangular loop, and low resonance is obtained by the length of line. Multiple resonances are established by the extended loops, and obtained the desired service bands by the connection points and lengths. By the implementation and measurement for the multiband ELA, it's showed -3.0~-1.46dBi average gains with 50.15~71.41% efficiencies at CDMA/GSM frequency band, and -8.28~-1.7dBi average gains with 14.87~67.68% efficiencies at DCS/USPCS/WCDMA frequency band.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.102-110
• /
• 2007

In this paper, a portable RFID reader which operated in 900MHz UHF band is designed and fabricated and the characteristics of the manufactured portable RFID reader is analyzed through measurement. Analysis of measurements results is achieved based on EPC Class 0 standards that proposed by EPC Global. The proposed RFID reader communicate with tags about 11kbps speed, and have 20 dBm for its maximum RF output power. The proposed portable RFID reader can recognize maximum 68 tags per second, and when reader's output power is 20 dBms, maximum recognition distance is 30cm. And the total size of implemented RFID reader is $71mm{\times}55mm$, that is the maximum 90%, minimum 14% reduced size compared with marketed product.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.11
• /
• pp.949-958
• /
• 2016

This paper presents the new development result of the multi-band, the multi-mode SDR(Software Defined Radar) platform. The SDR hardware platform is implemented by using the reconfigurable multi-band RF transceiver and antenna modules of S, X, and K-bands, and a programmable signal processing module. The SDR software platform is implemented by using the multi-mode waveform generation of CW, Pulse, FMCW, and LFM Chirp as well as the adaptable algorithm library of signal processing and open API software modules. Through the integrated test of the SDR platform, the operational performance was verified in real-time. Also, through the field-application test, the ground target and air-vehicle drone target were successfully detected and their test results were presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.430-433
• /
• 2017

This paper presents a S/C/X-band LNA MMIC with resistive feedback structure in 0.25 um GaN HEMT process. The GaN devices have advantages as a high output power device having high breakdown voltage, energy band gap and stability at high temperature. Since the receiver using the GaN device with high linearity can be implemented without a limiter, the noise figure of the receiver can be improved and the size of receiver module can be reduced. The proposed GaN LNA MMIC based on 0.25 um GaN HEMT device is achieved the gain of > 15 dB, the noise figure of < 3 dB, the input return loss of > 13 dB, and the output return loss of > 8 dB in the S/C/X-band. The current consumption of GaN LNA MMIC is 70 mA with the drain voltage 20 V and the gate voltage -3 V.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.1899-1906
• /
• 1998

In ATM switching system link bandwidth is one of the improtant resources. Thus ATM switching system must allocate the bandwidth to the users efficiently and guarantee the QoS. Especially to guarantee the QoS of the VBR traffic source such as video, users must declare the traffic characteristics and QoS expectations using UPC parameters. The CAC can use two multiplexig models in variation to link capacity and connection number. One is loseless multiplexing model; the second is a statistical multiplexing model. The loseless multiplexing model performs best when the number of mutiplexed sources is small, but as the number of multiplexed sources is increase the CAC must use the statistical multiplexing model. In this paper, the statistical multiplexing models are studied, which are suitable for high capacity ATM link on VBR traffic sources. The satistical multiplexing model and the loseless multiplexing model are combined. In statistical model we map the UPC parameters provided by new VBR connection to appropriate source traffic model. In the high capacity ATM link, as the connection number increases, the statical multiplexing gain increases.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.94-103
• /
• 2006

Ethernet passive optical network (EPON) has drawn many attention as a promising access network technology for FTTH because it can provide a high bandwidth with a low cost. Since the uplink bandwidth in the EPON system is shared by many users, it is necessary for an EPON system to have an efficient bandwidth allocation mechanism. To support QoS in EPON, the previous bandwidth allocation schemes employ strict priority queueing (SPQ). Since SPQ gives unlimited priority to higher service class, the QoS of lower service classes gets worse. In this paper, we propose Class Gated DBA (Dynamic Bandwidth Allocation) algorithm in which the bandwidth is requested / granted in a service class basis. To avoid the monopoly in bandwidth usage by higher classes the maximum bandwidth that is allocate to each service class is limited (fairness between services classes). In addition, to avoid the monopoly in bandwidth usage by some particular users, each ONU runs fairness bandwidth allocation algorithm within each service classes. Through computer simulations, it is verified that the proposed algorithm achieves a good level of QoS, and at the same time maintains a good level of fairness between both service classes and users.

• The Bulletin of The Korean Astronomical Society
• /
• v.34 no.1
• /
• pp.164.2-164.2
• /
• 2009