• The Korean Nurse
• /
• v.32 no.1
• /
• pp.61-76
• /
• 1993

This study was done in order La provide basic data to a Fee System for hospital based Home Health Care services in Korea in the future. It was done by investigating activities provided to possible Home Health Care clients who could be discharged early from genera] hospitals and then estimating the nursing care fee according to each nursing activity based upon the time used for activity. The subjects of the study were selected by convenience sampling and consisted of 35 clients who might be clients for Home Nursing Care and were presently admitted to a medical- surgical ward of Y University Medical Center located in Seoul, Korea. The data collection period was from September 1, 1991 to September 30, 1991. The research in strum nets utilized for the study were a client selection criterial for Home Health Care developed by Choo(l991) and a check-list of nursing activity developed by researcher. The results of the study were as follows : 1. There were 44 different nursing activities provided in the seven days but the time was calculated for only 25 of the nursing activities. 2. Fees for the 25 different nursing activities were calculated by multipling the median of the average wage of a staff nurse having five years experience in an A grade general hospital to the Lime of the nursing activity. The results were compared with the insurance fee which the government recognized as an appropriate fee for that activity. The nursing activities with a lower calculated fee than the insurance fee were suction, catheterization, exercise education and dressing change. The nursing activities with a higher calculated fee than the government recognized fee were 1M injection and vital sign check. 3. There was a range of 1-15 nursing activities provided daily to the client. For the average number of nursing activities per day of 6.26 events the nursing care fee was calaulated at W 6136 per day. 4. Based upon the results of the study, a recommentdation for a Home Health Care fee per visit based on the nursing activities provided could be formulated for a Home Health Care fee system. It could be formulated as following: 1) Home health Care fee per visit $=[(direct{\;} nursing{\;}fee(direct{\;}nursing{\;}care{\;}time{\;}per{\;}activity{\;}{\times}{\;}average{\;}nursing{\;}wage)+indirect fee]{\times}average$ nursing activity per visit]+management fee+ materials fee+a travel fee In this way a nursing fee could be calculated based upon the result of the study of the nursing fees per visit. 2) Nursing activity fees per visit. = $([direct nursing{\;}care{\;}fee+indirect{\;}nursing{\;}fee]{\times}average$ number of nursing activities provided per visit] (W 6, 136) + travel fee(\ 5, 542) +management fee material $fee({\alpha})\{\;}16, 436+{\alpha}$ The nursing fee per visit as calculated in this research of $\{\;}15, 0000+{\alpha}$ could be adjusted according to the patient's condition or the use of high technology nursing care or according to the amount of time spent for travel. The nursing care fee per visit presented in this study can be validated through a Home Health Care demonstration project.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.1-9
• /
• 2023

In order to carry out construction work, it is urgent to introduce a proper wage system so that the cost burden of projects that have been won due to bleeding competition among original government buildings based on low-priced bids can be transferred to subcontractors. Purpose: Construction with illegal multi-level industrial structure needs to improve the wage reduction environment leading to order (100%) → original contractor (80%) → subcontractor (65%) → load contractor (65%) and aims to ensure wages for end workers. Method: Investigate the current status of labor cost appropriate payment plan in the construction industry, and investigate the case of the appropriate wage system (P.W) in the United States. In addition, the effect and direction of the appropriate wage system are presented. Result: Individual minimum wage security was also mentioned in the Constitution, and many researchers suggested that only the introduction of an appropriate wage system could solve the problem of reducing worker labor and ensure quality and safety. Conclusion: The proper wage system in the construction industry will block illegal multi-level and illegal foreign work, improve the labor environment in the construction market, create an influx of young workers, and have a significant impact on the construction industry's competitive structure, safety, and quality.

• Nutrition Research and Practice
• /
• v.10 no.5
• /
• pp.555-562
• /
• 2016

BACKGROUND/OBJECTIVES: Childhood obesity has become a global epidemic. Development of effective and sustainable programs to promote healthy behaviors from a young age is important. This study developed and tested an intervention program designed to promote healthy eating and physical activity among young children in South Korea by adaptation of the US National Aeronautics and Space Administration (NASA) Mission X (MX) Program. SUBJECTS/METHODS: The intervention program consisted of 4 weeks of fitness and 2 weeks of nutrition education. A sample of 104 subjects completed pre- and post- surveys on the Children's Nutrition Acknowledgement Test (NAT). Parents were asked for their children's characteristics and two 24-hour dietary records, the Nutrition Quotient (NQ) at baseline and a 6-week follow-up. Child weight status was assessed using Korean body mass index (BMI) percentiles. RESULTS: At baseline, 16.4% (boy: 15.4%; girl: 19.2%) of subjects were overweight or obese (based on $BMI{\geq}85%tile$). Fat consumption significantly decreased in normal BMI children ($48.6{\pm}16.8g$ at baseline to $41.9{\pm}18.1g$ after intervention, P < 0.05); total NQ score significantly increased from 66.4 to 67.9 (P < 0.05); total NAT score significantly improved in normal BMI children (74.3 at baseline to 81.9 after the program), children being underweight (from 71.0 to 77.0), and overweight children (77.1 at baseline vs. 88.2 after intervention, P < 0.001). CONCLUSIONS: The 6-week South Korean NASA MX project is feasible and shows favorable changes in eating behaviors and nutritional knowledge among young children.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.2
• /
• pp.129-138
• /
• 2011

Construction methods for underground structure are classified as bottom-up, up-up, and top-down methods depending on the procedure of construction related to a superstructure. In top-down construction methods, building's main structure is built from the ground level downwards by sequentially alternating ground excavation and structure construction. In the mean time, the main structure is also used as supporting structure for earth-retaining wall, which results in the increased stability of the earth-retaining wall due to the minimized deformation in adjacent structures and surrounding grounds. In addition, the method makes it easy to secure a field for construction work in the downtown area by using each floor slabs as working spaces. However top-down construction method is often avoided since an excavation under the slab has low efficiency and difficult environment for work, and high cost compared with earth anchor method. This paper proposes a combined construction method where semi-open cut is selected as excavation work, slurry as earth -retaining wall and CWS as top-down construction method. In the case study targeted for an actual construction project, the proposed method is compared with existing top-down construction method in terms of economic feasibility, construction period and work efficiency. The proposed construction method results in increased work efficiency in the transportation of earth and sand, and steel frame erection, better quality management in PHD construction, and reduced construction period.

• Journal of Bio-Environment Control
• /
• v.10 no.3
• /
• pp.148-154
• /
• 2001

The uplift capacity of a pile for improving the wind resistance of the 1-2 W type plastic film pipe on greenhouses was tested using the plane and corrugated piles with various shapes and diameters. First, the resistant uplift capacity was measured by using the uplift loading on plane piles. As the uplift loading on plane piles increased, the resistant uplift capacity also increased until the loading was reached to ultimate uplift capacity. After ultimate uplift capacity was appeared the uplift displacement, the uplift capacity was decreased gradually. Secondly, the resistant uplift capacity was measured by using the uplift loading on corrugated piles. After the uplift capacity was reached the uplift displacement, the uplift capacity was continually increased or decreased. In general, the ultimate uplift capacity was independent of pile shapes, pile diameter length, and embedded pipe depth. However, the ultimate uplift capacity of a corrugated pile was twice more than that of a plane pile without regard to its diameter and embedded depth. The ultimate uplift capacity per unit pile area was increasing in deeper embedded depth. However, the longer a pile diameter was, the less ultimate uplift capacity. The uplift capacity of a plane pile, used in conjunction with the design wind velocity (26.9m.s$^{-1}$ ) of the project area, was unsatisfiable without regard to diameters and embedded depths of piles, while most of corrugated piles were well appeared uplift capacity under various experimental conditions.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Journal of the Korean Society for information Management
• /
• v.4 no.2
• /
• pp.31-46
• /
• 1987

The United Kingdom has a well-developed and comprehensive information infrastructure which has grown up over many years, but in the strict sense it has no coherent body of policy relating to information collection, storage, provision and supply. However, each of the governmental, professional and other bodies which has any major involvement with information, has committees to run its affairs and develop its policies in relation to issues and problems in the field. In addition, a number of ad hoc committees and working parties, to discuss or deal with a current problem, or to monitor or advise on the conduct of a research or development project, show that there is a high degree of awareness. of what is happening in the field and that there are many opportunities for expressing any particular point of view. The need for good intelligence in business or industrial operations is now being more generally accepted, and in consequence the need for a director of intelligence is also seen. The director of information in an industrial setting is the information manager, who combines or has access to the skills of several disciplines, including library, data processing and communication skills as well as managerial. Recognition of the need for such persons has policy implications in terms of short-term training provision and long-term educational facilities for the emerging profession, as well as manpower planning implications.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.817-820
• /
• 2008

The river environments of many streams in korea have been deteriorate through the rapid industrialization and urbanization since the 1960s. In korea, on the other hand, much efforts on the research and project have been made for the restoration of the deteriorated streams to close-to-nature. in order to restore the deteriorated streams, therefore, it is necessary to investigate such advanced technologies and materials. In view of this requirement, various research paths are being taken focusing on coarse aggregates to make multi-functional porous concrete having continuous voids so as to improve water and air permeability, acoustic absorption, water purification and applicability to vegetation. The Purpose of this study is to investigate the method for recovery of the environment in the streams area using porous concrete retaining wall block. the multi-P.O.C block applies for test in the Jangduri-cheon have been monitored planting, stability etc. after 6 months, plant grows flourishing and reconstructed in state such as nature rivers.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.11a
• /
• pp.397-406
• /
• 2000

대부분의 국방정보시스템의 소프트웨어는 높은 가용성, 신뢰성, 신속성, 정확성 등을 요구하는 대규모이면서 복잡한 실시간 시스템이다. 이러한 국방정보시스템의 소프트웨어 개발사업에 있어서 저비용 고효율의 미개국방경영 건설을 위하고 강한 전투력을 육성하기 위해서는 국방정보시스템의 효율적인 소프트웨어 개발사법이 요구된다. 따라서, 국방정보시스템의 소프트웨어 사업관리자가 개발사업을 관리하고 감독하는데 있어서 개발자와 사용자간의 조정 및 통제 기능을 수행하고 해당 국방정보시스템의 특성을 파악하여 성공적인 사업수행을 할 수 있도록 기술적인 사업관리 측면에서 구체적이고 상세화된 방안/지침을 제공하기 위한 전문가시스템의 지식베이스 도메인 지식개발에 관한 연구이다. 기존의 국방정보시스템의 사업관리자가 경험을 동해 축적해 온 기술, 정책, 아이디어, 노하우 등에 대한 지식을 습득하고 사업 관련자료에서 제시한 소프트웨어 생명주기 단계별 방안이나 지침 등을 바탕으로 하여 식별된 사실이나 내용을 지식베이스로 구축하여 국방정보시스템의 사업관리자가 필요로 할 때 설명모듈을 거쳐 임무 및 세부활동사항을 게시하여 줌으로써 사업관리 경험이 부족하거나 사업관리자가 교체되었을 때 사업관리자들이 업무를 지속적으로 연계시켜 임무수행이 가능하도록 기초/기반 여건을 제공하고자 한다. 본 논문은 국방정보시스템의 소프트웨어 개발사업에서 소프트웨어 생명주기 단계별 사업관리자의 임무 및 세부활동사항 지원용 전문가시스템을 개발할 때 이용할 수 있도록 도메인 지식을 개발하는 것이며 논문의 결과를 활용시 기대되는 효과는 본문을 참고 바란다.의 장점을 취합하여 설계되었다. 본 시스템은 기존의 UN/EDIFACT표준을 사용하고 있는 EDI환경과 기존 VAN 방식의 EDI 중계 시스템과 연동되며, 향후 관세청의 XML/EDI 표준 시행을 미리 대비하는 선도연구로서 자리매김이 된다. 본 연구에서는 개발된 XML/EDI 통관시스템은 향후, 서비스의 최대 걸림돌이 되어왔던 값비싼 EDI 사용료의 부담에서 벗어날 수 있게 할 것이며, 저렴한 EDI구축/운영 비용으로 전자문서교환의 활성화와 XML이 인터넷 기반의 문서유통 표준으로 자리매김할 수 있는 중요한 계기가 될 것이다.재무/비재무적 지표를 고려한 인공신경망기법의 예측적중률이 높은 것으로 나타났다. 즉, 로지스틱회귀 분석의 재무적 지표모형은 훈련, 시험용이 84.45%, 85.10%인 반면, 재무/비재무적 지표모형은 84.45%, 85.08%로서 거의 동일한 예측적중률을 가졌으나 인공신경망기법 분석에서는 재무적 지표모형이 92.23%, 85.10%인 반면, 재무/비재무적 지표모형에서는 91.12%, 88.06%로서 향상된 예측적중률을 나타내었다.ting LMS according to increasing the step-size parameter $\mu$ in the experimentally computed. learning curve. Also we find that convergence speed of proposed algorithm is increased by (B+1) time proportional to B which B is

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 1998.11a
• /
• pp.0-0
• /
• 1998

-Part I- As market needs become more various, the production of smaller quantities of a wider variety of products becomes increasingly important. In addition, in order to meet demands for more efficient production, long-term unmanned factory operation is prevailing at a remarkable pace. Within this context, laser machines are gaining increasing popularity for use in applications such as cutting and welding metallic and ceramic materials. FANUC supplies four models of $CO_2$ laser oscillators with laser power ranging from 1.5㎾ to 6㎾ on an OEM basis to machine tool builders. However, FANUC has been requested to produce laser oscillators that allow more compact and lower-cost laser machines to be built. To meet such demands, FANUC has developed six models of Slab type YAG laser oscillators with output power ranging from 150W to 2㎾. These oscillators are designed mainly fur cutting and welding sheet metals. The oscillator has an exceptionally superior laser beam quality compared to conventional YAG laser oscillators, thus providing significantly improved machining capability. In addition, the laser beam of the oscillator can be efficiently transmitted through quartz optical fibers, enabling laser machines to be simplified and made more compact. This paper introduces the features of FANUC’s developed Slab type YAG laser oscillators and their applications. - Part II - All-solid-state lasers employing laser diodes (LD) as a source of pumping solid-state laser feature high efficiency, compactness, and high reliability. Thus, they are expected to provide a new generation of processing tools in various fields, especially in automobile and aircraft industries where great hopes are being placed on laser welding technology for steel plates and aluminum materials for which a significant growth in demand is expected. Also, in power plants, it is hoped that reliability and safety will be improved by using the laser welding technology. As in the above, the advent of high-power all-solid-state lasers may not only bring a great technological innovation to existing industry, but also create new industry. This is the background for this project, which has set its sights on the development of high-power, all-solid-state lasers with an average output of over 10㎾, an oscillation efficiency of over 20%, and a laser head volume of below 0.05㎥. FANUC Ltd. is responsible for the research and development of slab type lasers, and TOSHIBA Corp. far rod type lasers. By pumping slab type Nd: YAG crystal and by using quasi-continuous wave (QCW) type LD stacks, FANUC has already obtained an average output power of 1.7㎾, an optical conversion efficiency of 42%, and an electro-optical conversion efficiency of 16%. These conversion efficiencies are the best results the world has ever seen in the field of high-power all-solid-state lasers. TOSHIBA Corp. has also obtained an output power of 1.2㎾, an optical conversion efficiency of 30％, and an electro-optical conversion efficiency of 12%, by pumping the rod type Nd: YAG crystal by continuous wave (CW) type LD stacks. The laser power achieved by TOSHIBA Corp. is also a new world record in the field of rod type all-solid-state lasers. This report provides details of the above results and some information on future development plans.