• 한국전산유체공학회:학술대회논문집
• /
• 2000.10a
• /
• pp.92-100
• /
• 2000

At the end of 1999. the TeraCluster project has started in the KORDIC Supercomputer center to study PC clusters for parallel computing. The aim is to replace the Cray T3E with a new cluster system in 2002. The PC cluster without a fast network is well suited for applications which do not require large amount of global communications. Since CFD problems are not very communication intensive, whole test cluster may be efficiently used. As an example of practical CFD simulations. the flow past the ONERA M6 wing and the flow past infinite wing are simulated on a cluster of Linux workstations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.714-717
• /
• 2005

The concept of jigs and fixtures makes it possible to build fixtures that can be dismantled at project completion. Since this concept is modular, it is not limited to any particular unit shapes or sizes. Various standards assure that each component assemble rapidly, to get precision and accuracy. Best suited for prototype and low volume production, as well as, start-up or zero-runs, it can also substitute for damaged dedicated fixtures to minimize down-time. It need to do DB for each part by Pro/Engineer and to assemble before manufacturing. In the future will assemble each of clamping and position parts by automation.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.04a
• /
• pp.475-482
• /
• 1993

지금까지지 PERT/CPM기법은 대형 Project 및 건설공사등의 공정관리업무에 주로 활용되어 왔으며 공정관리분야에 커다란 기여를 해 왔다. 본 연구에서는 이러한 PERT/CPM기법의 새로운 적용분야로 각종설비의 정비(Maintenance) 또는 수리(Repair)작업에의 Approach를 시도했다. 에너지 설비는 제철소내 80여개 설치되어있으며 설비별 수리주기, 에너지수급 Balance 정비인원등의 요소를 고려해 년간 계획수립 후 수리를 실시하게 된다. 일련의 수리작업관리는 경험에 의한 수작업 공정표작성, 계획수립 및 진행관리등으로 공정관리에 많은 어려움을 겪고 있다. 이러한 수리작업 공정관리, 즉 수리계획수립, 진행관리 및 실적관리에 이르는 업무를 효율적으로 수행하기 위해 SAS(Strategic Application System) S/W를 활용하여 System을 개발하였다.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.2
• /
• pp.6-11
• /
• 1997

비점원오염은 하천 및 지하수 수질오염에 많은 기여를 하고 있는 것으로 나타나고 있는 반면에 우리나라에서는 비점원오염에 관한 연구는 상대적으로 미약한 것으로 지적되고 있다. 본 기사에서는 비점원오염에 대한 이해를 증진하고 현장실험연구를 활성화하는 데 기여하기 위하여 미국 등의 선진국에서 실행하고 있는 현장실험방법을 경지단위의 연구, 유역단위의 연구, 그리고 지하수 수질에 관한 연구로 구분하여 고찰하였다. 비점원오염에 관한 현장연구방법, 연구시 중요사항, 고려하여야 할 사항 등에 관한 자료는 'Gale, J.A., D. E. Line, D. L. Osmond, S. W. Coffey, J. Spooner, J. A. Arnold, T. J. Hoban, and R. C. Winverley. 1993. Evaluation of the Experimental Rural Clean Water Project, NCSU Water Quality Group, Biological and Agricultural Engineer-ing Department, North Carolina State University, Raleigh, NC, EPA-841-R-93-005'에 자세히 기술되어 있다.

• Structural Engineering and Mechanics
• /
• v.49 no.1
• /
• pp.129-145
• /
• 2014

In order to investigate the characteristics of torsional wind loads on rectangular tall buildings, five models with different rectangular cross-sections were tested in a boundary wind tunnel. Based on the test results, the RMS force coefficients, power spectrum densities as well as vertical correlation functions of torsional wind loads were analyzed. Formulas that took the side ratio as parameters were proposed to fit the test results above. Comparisons between the results calculated by the formulas and the wind tunnel measurements were made to verify the reliability of the proposed formulas. An simplified expression to evaluate the dynamic torsional wind loads on rectangular tall buildings in urban terrain is presented on basis of the above formulas and has been proved by a practical project. The simplified expressions as well as the proposed formulas can be applied to estimate wind-induce torsional response on rectangular tall buildings in the frequency domain.

• Journal of the Korean Professional Engineers Association
• /
• v.23 no.6
• /
• pp.41-46
• /
• 1990

First of all, Under given condition such as bit gage of 36mm Drill bit with right class of jack-logs experimental test carried out from two face of Bench, firing of each hole brought 90 degree Angle face and them measured length of Burden and charged ammount of powder as following. (equation omitted) A=Activated Area A=ndi=m S=Peripheral length of Charged. room Ca=Rock Coeffiecency d : di=Hole diameter When constructed subway of Seoul in 1980 the blasting works increased complaint of ground vibration. in order to prevent the damage to structures. Some empirical equations were made as follows on condition with Jackleg Drill (Bit Gage ø 36mm) and within 30 meter distance between blasting site and structures. V=K(D / W)$\^$-n/ N=1.60-1.78 K=48-138 Project one of contineous works to above a determination of empirical equation on the cautious blasting vibration with Crawler Drill(ø 70-75mm) in long distance. V=41(equation omitted) V=124(equation omitted).

• Wind and Structures
• /
• v.5 no.2_3_4
• /
• pp.127-140
• /
• 2002

This paper presents some of the results of a project whose aim has been to produce a full simulation model which would determine the efficacy of pesticides for use by both farmers and the bio-chemical industry. The work presented here describes how crop architecture can be mathematically modelled and how the mechanics of pesticide droplet capture can be simulated so that if a wind assisted droplet-trajectory model is assumed then droplet deposition patterns on crop surfaces can be predicted. This achievement, when combined with biological response models, will then enable the efficacy of pesticide use to be predicted.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.483-485
• /
• 2004

The SRI (Super Resolution Imager) is the development project for the next generation satellite camera. This camera has more high resolution than the present satellite camera. It's used by very accurate observation and other multi-purposes. In this paper, the SRI electronic system is described in terms of H/W (Configuration and Function operation).

• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.88-92
• /
• 2017

As the considerable request of the fast and accurate way of the selection of circuit breaker is increased, we introduce the development of software of circuit breaker selection for the marine use. Originally, the selection of circuit breaker has been carried out by manual in the marine project. It is not the easy work to select the proper type of circuit breaker to check the time-current characteristic curves of each type of circuit breakers for the various type of loads. In this regards, we developed the software to select the proper type of circuit breaker to confirm fast and accurately. And, we introduce the course of the development of the software for the selection of circuit breaker.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.3
• /
• pp.238-245
• /
• 2004

This paper describes an architecture information management system using XML. The purpose of the system is to manage the information stored in standard format, XML, that has many valuable properties. The proposed architecture information consists of project information, drawing information, and material information. Each information is expressed using XML and for each information, XML schema is presented in this paper. In this system, detail information of materials that exists on the supplier's homepage can be displayed when the user of the system wants to check the detail information. Also, drawings stored in STEP data can be browsed in this system. The reports of each information are prepared using XSL. The proposed system shows that XML can be used for a format to store architecture information and various functions can be implemented based on XML related standards.