• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.353-354
• /
• 2006

The automatic inspection system is developed for the formed end part of automotive fuel pipe. The developed system has functions of outer diameter and formed end length measurement by LVDT(linear variable differential transformer) together with burr cleaning of automotive fuel pipe. The measured data are managed and controlled in real time by embedded SPC(statistical process control) program. The system is composed of mechanical part, electronic part and developed software system. These three parts operate automatically by mutual communication with each other. The developed system showed good results in finding inferior goods and efficiency improvement of the fuel pipe production line. It also eliminated the unreliable manual inspection processes and improved the confidence of product quality.

• 한국학교수학회논문집
• /
• 제6권2호
• /
• pp.39-53
• /
• 2003

본 연구에서는 인터넷 환경에 적합한 동적기하 소프트웨어에 대하여 논의하였다. 먼저 동적기하 소프트웨어의 필요성을 살펴보고, 상용되고 있는 소프트웨어인 GSP, Cabri, Cinderella의 기능 및 특징을 비교하였다. 그리고 본 연구진에 의하여 국내 최초로 개발된 DRC(Digital Ruler and Compass)의 개발과정과 구조에 대하여 알아보고, 인터넷 환경에서 DRC를 활용한 학습 방안에 대하여 알아보고 이후의 발전전망에 대하여 논의하였다.

• 환경영향평가
• /
• 제1권1호
• /
• pp.21-30
• /
• 1992

Environmental Impact Assessment(EIA) is developing as a tool for environmentally sound and sustainable development in Korea. For more effective implementation of it, we try to apply Environmental Information System (EIS) to EIA process. EIS is composed of geographic and attribute data related to environment and Geographic Information System(GIS), and it will be applied to scoping, prediction, and alternative assessment, etc. in EIA. This study focuses on application of geographic data using GIS in suitability analysis of alternative assessment. We use TIN, buffering, and overlaying in GIS functions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.608-609
• /
• 2008

An alternator which converts mechanical rotating energy into electric energy is an important component of a vehicle. It operates in broad range from 3000 RPM to 18000 RPM. So, sufficient flow rate and low noise are needed in such broad operating range for a cooling fan of this alternator. In current study, the cooling fan of an alternator is developed through DFSS process and numerical analysis. In order to calculate flow rate and noise level, SC/Tetra and FlowNoise S/W are used respectively, for a new developed fan, compared with original model, numerical result shows 3 dBA reduction and measured value shows 4 dBA reduction.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.85-89
• /
• 2016

Wing is the most important part of aircraft which produces lift. In general when aircraft takes off or lands, high lift is required and additional devices are adopted in front and aft-side of wing, which constitute so-called multi element airfoils. The objective of this research is to develop a specialized grid generation program to help engineers in reducing human labor and eliminating time-consuming process for mesh regeneration by deforming the initially-given grid system with efficient deforming method. This paper describes briefly about the mesh deformation methods, and provides some results to verify the quality of deformed mesh and eventually correctness of current approach.

• 기술혁신학회지
• /
• 제5권2호
• /
• pp.167-188
• /
• 2002

Summary: This paper analyzes Indian software industry in the perspective of innovation cluster. The research shows that the software industry has been following an upstream clustering process, where the major value activity is expanding from low value product/services to high value product/services. The growth of software industry could be successful because there was appropriate initial condition of Bangalore, such as the availability of high qualified human resources, excellent research institutes, small high-tech companies. The role of government was helpful for the late growth of software industry but not a critical factor for the initial development of the S/W cluster. It is suggested that government should consider the initial condition of a concerned location critically to implement a cluster-type innovation policy.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 압출 및 인발 심포지엄
• /
• pp.83-88
• /
• 1999

This study presents development of an software for process and die design of hot extrusion through square dies. The design of extrusion dies is still an art rather than a science with increasing complexity of shape and thinness of section. Therefore, most of the die design is still dependent on personal judgement, intuition and experience. The objective of this study is to develop an software system which includes a design rule extracted from literatures and experts in the extrusion industry. The system also includes finite element simulation program. The developed system is effectively used to design extrusion processes and dies with lead time and trial extrusion.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.201-205
• /
• 2001

This paper presents the load modeling process and bus load models for KEPCO power system. At first, load devices commonly used in KEPCO power systems were selected, and tested for measuring the voltage and frequency sensitivity of active and reactive power. From this test, about 40 voltage and frequency dependent load models have been obtained. The bus load composition rate for KEPCO power system has been determined using the various recent surveys and papers in order to develop the load model for a power system bus. To verify the accuracy of developed bus load models, the field test for measuring active and reactive power according to artificial variation of the bus voltage was performed at 8 substations for spring summer, autumn, winter cases. With data of this seasonal field test, more reliable bus load models for KEPCO power systems were developed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.1044-1048
• /
• 1997

Wire-cut EDM is used in Die manufacturing as the part of non-traditional cutting process, But,the determination of it's cutting condition with high efficiency and precision is difficult due to the influence of cutting environment and cutting mechanism. In this study, we examine the cutting performance of the SKD11 and Brass in wire-cut EDM and make the neural network which have the configuration of 5-12-2 and back-propagation learning rule. Through the neural network, we can appraise the cutting performance before working and determine the optimal cutting condition. By introducing this method to the W-cut EDM, we can enhance the cutting efficiency.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.329-335
• /
• 2004

An, FE-based, on-line model is presented for the rapid and precise prediction of roll thermal profile in hot strip rolling. The validity of the model is demonstrated through comparison with FE-based off-line model which was verified by measurements. Also demonstrated is its capability of reflecting the effect of diverse process variables.