• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.27-36
• /
• 2004

Contemporary objectives for steel rod rolling processing are increasingly complex and often contrasting i.e. obtaining a desired product with optimum combination of properties such as strength, toughness and formability at lower cost. Low-alloy steel rods have been produced with several heat treatments for drawing and forging processes at room temperature. In order to reduce these heat treatments much of the researches concerning of high temperature mechanical behavior of steel rods have been conducted at wire rod mill of POSCO. In this present work, optimizations of rolling temperature and cooling rate for JS-SCM435 are performed to eliminate softening heat treatment(Low Temperature Annealing) for drawing process. The results from the optimization changed the microstructure of rods after rod rolling from Bainite with high tensile strength of 1000Mpa to Pearlite and Ferrite with appropriate strength of 750Mpa that is equivalent tensile strength after softening heat treatment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.1
• /
• pp.147-154
• /
• 2002

This paper describes the devlopment and implementation for the KOMPSAT-1 scheduling & automatic command plan generator(KSCG). Some problems in mission planning and command planning had occurred using the mission & command planning s/w in MAPS(Missin Analysis and Planning Subsystem) during the LEOP(Launch & Early Orbit Phase) & early normal mission phase due to lots of manual input process and non-automatic process. Therefore, the more mission operations for KOMPSAT-1. In order to prevent the development of new one(KSCG) which should reduce the manual process and generate automatically the command plan has been needed. As a result, the mission operations of KOMPSAT-1 has greatly became stable and more effient.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.1
• /
• pp.57-65
• /
• 2002

The purpose of this research is to develop a collaborative architectural design system. Design collaboration requires an extensive use of communication methods as well as the participation of various experts from different domains. Such facts address several issues when the Internet and digital media are able to create a completely new work environment. The building design process was studied, and possible modes of design collaboration were defined. A prototype system is being developed in accordance with the defined collaboration model. The system integrates a set of communication tools and web-based design media. Such media include a synchronous multi-user web CAD tool, a schematic 3D design tool, and a electronic whiteboard. A project database was designed in order to coordinate the project-wide communication which elaborates technologies such as web-based data access. In order to find out the effectiveness of the system, a usability test was performed both in quantitative and qualitative manner. The research will contribute to the development of world-wide design and construction collaboration through the Internet, which is becoming a mainstream building process model.

• Journal of the Korea Safety Management & Science
• /
• v.20 no.3
• /
• pp.11-19
• /
• 2018

This study suggests a model of production information system that can reduce manufacturing lead time and uniformize quality by using DNC S/W as a part of constructing production information management system in the industrial field of the existing marine engine block manufacturing companies. Under the effect of development of this system, the NC machine interface device can be installed in the control computer to obtain the quality information of the workpiece in real time so that the time to inspect the process quality and verify the product defect information can be reduced by more than 70%. In addition, the reliability of quality information has been improved and the external credibility has been improved. It took 30 minutes for operator to obtain, analyze and manage the quality information when the existing USB memory is used, but the communication between the NC controller computer and the NC controller in real time was completed to analyze the workpiece within 10 seconds.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2004.05a
• /
• pp.65-69
• /
• 2004

The need for developing sustainable solutions for managing the animal waste is vital for the future of the animal industry in North Carolina. As part of that process, the North Carolina Attorney General has concluded that the public interest will be served by the development and implementation of environmentally superior swine waste management technologies appropriate to each category of hog farms. To facilitate in the development, testing, and evaluation of potential technologies it is necessary that all aspects of environmental issues (air, water, soil, odor and odorants, and disease-transmitting vectors and airborne pathogens) be addressed as Part of a comprehensive strategy, Program OPEN (Odor, Pathogens, and Emissions of Nitrogen) Is comprehensively addressing these issues.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.166-170
• /
• 2008

The changing process from hovering mode to transition one is of importance to determine a stability of tilt-rotor aircraft, which is utilized in UAV(Unmaned Aerial Vehicle). The analysis on fluid flows and aerodynamic characteristics according to variation of tilting angle of rotor is essential step in development of tilt-rotor. In the present study, the computation domain is divided into the rotating and stationary regions in order to consider the rotating blades. For the convenient realization of various tilting angle as well as application of boundary condition, the whole computation region is constructed into sphere domain. The near farfield boundary condition is adopted. The airfoil used in computation is NACA 0012. The computation results for the hovering mode are validated by comparing with previously conducted experimental results. From the results, the flow fields around rotor blade and the aerodynamic characteristics in transition mode are observed. The computational result will provide the basis for development and performance evaluation of tilt-type aircraft.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.5
• /
• pp.38-48
• /
• 2004

Recently the use of high-speed equipment in machine-tool industry has greatly increased, which requires the development of prognostics and prediction methods on the design stage. Conversion of the test/experiments stage from real to virtual reality will not only significantly reduce the design and manufacturing cost, but will also increase design quality. This paper shows how it is possible to develop the automated system for the design calculations of the air-bearing spindles. First, the general calculation method is introduced. It contains several steps, namely, geometry identification, pressure calculation, stiffiness calculation, dynamics characteristics calculation. For geometry identification reducing spindle shaft to rings was proposed, which helps to automate the calculation process. For pressure calculation the Peshti method was implemented. For stiffiness calculation the analysis was made, which shown the necessity of correct calculation step selection. Then the system of ordinary differential equations containing influence coefficients was evolved, which is used for trjectories calculation. The graphical representation of the calculation results shows the dynamic behavior of the spindle unit concerning various working conditions. Finally, this automated system is illustrated by an example of the air-bearing spindle calculation.

• Progress in Superconductivity
• /
• v.10 no.2
• /
• pp.99-102
• /
• 2009

We report our development of the fabrication process of sub-micron scale $Al-AlO_x-Al$ tunnel junction by using electron-beam lithography and double-angle shadow evaporation technique. We used double-layer resist to construct a suspended bridge structure, and double-angle electron-beam evaporation to form a sub-micron scale overlapped junction. We adopted an e-beam insensitive resist as a bottom sacrificing layer. Tunnel barrier was formed by oxidation of the bottom aluminum layer between the bottom and top electrode deposition, which was done in a separate load-lock chamber. The junction resistance is designed and controlled to be 50 $\Omega$ to match the impedance of the transmission line. The junctions will be used in the broadband shot noise thermometry experiment, which will serve as a link between the electrical unit and the thermodynamic unit.

• Journal of the Korean housing association
• /
• v.22 no.5
• /
• pp.21-28
• /
• 2011

This thesis aims to identify the design guidelines for environmental plans for the facilities for the aged people with a focus on the users' needs and the concept of aging in place. For this purpose major environmental design factors were researched by analyzing spaces and interviewing the managers and supervisor of W nursing home in Jeju Island that was opened in 1980s. Surveyed factors were divided into five categories, and by applying the design guideline theory of age friendly environment and nursing home facilities to them, five municipal composition factors of Kevin Lynch, universal design, environmental behavior model of John Zeisel principles were found. On the other hand, the environmental changes and development process of W nursing home is a showcase that reveals the importance of narrowing the gap in the opinions of the space users, the experts of architecture and administration which is emphasized in the principles of Inquiry by Design of John Zeisel. This research is expected to be used effectively for the researchers who study the space designs for the age-friendly environment.

• Transactions of Materials Processing
• /
• v.15 no.2 s.83
• /
• pp.118-125
• /
• 2006

API steel is used for line-pipe to transport the oil and natural gas. As the recent trends in the development of API steel are towards the use of larger diameter and thicker plate, many researches have been studied to achieve higher strength, higher toughness and lower yield ratio in API steel. However, the strength of API steel after pipe forming is changed depending on the competition of the Bauschinger effect and work hardening which are affected by the strain history during pipe forming process. So, the purpose of this study is to investigate the influence of microstructure on the Bauschinger effect for API steel. To change the microstructure of API steel we have changed the hot rolling condition and the amounts of V and Cu addition. The compression-tensile test and the microstructure observation by OM and TEM were conducted to investigate the yield strength drop and the correlation between the Bauschinger effect and microstructure of API steel. The experimental results show that the increase of polygonal ferrites volume fraction increases the Baushcinger effect due to the back stress which comes from the increase of mobile dislocation density at polygonal ferrite interior during the compressive deformation. The hot rolling condition was more effective on the Bauschinger effect in API steel than the small amount of V and Cu addition.