• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.10
• /
• pp.871-877
• /
• 2021

Aircraft defects are important matters directly related to the operation of the aircraft and the life of the pilot. The defects in the mission software that occur during aircraft control seriously affect the pilot's mission performance and safety. Therefore, the organization in charge of aircraft development or software defects are reinforced in the process to identify and eliminate defects in the early stages of development, and a lot of labor and time are spent, but due to the nature of the mission software, strong functional coupling with other avionics and high complexity, so there are restrictions on the identification and removal of software defects through the existing test method. This study analyzes the effect of securing mission software integrity and reducing test cost through data integrity verification by developing a tool that automates the verification of expected value of feedback data among communication data of mission computer interlocking equipment.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.391-396
• /
• 1998

To inhibit the import of hot sauce, the manufacturing process of the Korean type hot sauce was developed. Chemical analysis of the imported hot sauce showed as follows; moisture 95.66% (w/w), salt 2.79% (w/w), titratable acidity 3.62% (w/w), crude fiber 0.42% (w/w), reducing sugar 0.03% (w/w), capsanthin 0.89% (w/w), capsaicin 4.28 mg% and pH 3.26. Korean type hot sauce prepared with red pepper, salt and vinegar was aged in oak barrel for 12 months at $10^{\circ}C$. Chemical analysis of the Korean type hot sauce showed as follows; moisture 92.05% (w/w), salt 8.82% (w/w), titratable acidity 3.88% (w/w), crude fiber 3.14% (w/w), reducing sugar 1.78% (w/w), capsanthin 0.13% (w/w), capsaicin 2.32 mg% and pH 3.29. Among chemical components, the contents of reducing sugar, salt and crude fiber except capsaicin and capsanthin were more than those of imported one. Chemical components of the Korean type hot sauce were changed slightly during aging for 12 months. The cell counts of yeast were increased from $3.2{\times}10^2\;to\;5.2{\times}10^6$ till the second month and those of lactic acid bacteria were increased from $3.{\times}10^1\;to\;1.5{\times}10^7$ till the third month, those of yeast and lactic acid bacteria decreased from the eighth month showed $6.6{\times}10^4$ and not detectable on the twelfth month, respectively. As the results of sensory evaluation on the Korean type hot sauce were evaluated to be superior to the imported to be superior to the imported one.

• Journal of the Korean Society for information Management
• /
• v.11 no.2
• /
• pp.165-184
• /
• 1994

DB production process includes a series of data analysis, DB design, source data input, data conversion and load, and DB operation and maintenance. Software development and operation technique for data input and DR production is similar to each other, even though each computer environment or the function of information retrieval system is a little different. The purpose of this paper is to introduce software for data input and DR production in ETLARS system, which is providing services to 6.000 users ( a s of Oct. 10, 1994) by Electronics and Telecommunications Research Institute, and to open know-how information in the production and operation of Hanguel DR.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.395-398
• /
• 2001

Recently, the increasing need for internet and the activation of hiring business of communication line makes the demand for OPGW cable which can construct the optical communication network in the basis of existing overhead power transmission line. Especially, the demand is focused on the high fiber count OPGW due to high capacity transmission. In step with the trend toward high fiber count cable we have developed the Stainless Steel Loose Tube type OPGW within which have 144core firstly in KOREA. This paper describes the cable design and manufacturing process which gives the stable operation in very severe conditions and the long-term reliability test results conducted in according to dominant specification IEEE Std. 1138-1194.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.211-212
• /
• 2014

This paper is to suggest the security requirements for identification and authentication in analysis step. Firstly, individual ID should be uniquely identified. The second element is to apply the length limitations, combination and periodic changes of passwords. The third should require the more reinforced authentication methods besides ID and passwords and satisfy the defined security elements on authentication process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.267-270
• /
• 2009

In the present investigation, we are newly developing a new forming process which can fabricate micro patterns on large-area polymeric substrates for high speed mass production. The key idea of the new process is to pressurize multiple vacuum-packed substrate-mold stacks above the glass transition temperature ($T_g$) of the polymeric substrates. The new process is thought to be promising micro-pattern fabrication technique in three aspects; firstly, isostatic pressing ensures the uniform micro-pattern replicating condition regardless of the substrate area. Secondly, the control of forming condition such as temperature and pressure can realize well-defined process condition exploited in the conventional hot embossing research field. Thirdly, multiple substrates can be patterned at the same time. A prototype forming machine for the new process was developed with the design consideration realizing the present idea. With a developed machine, micro prismatic array patterns with 50 um in size were successfully made on the $380{\times}300{\times}6\;mm$ PMMA plate.

• Progress in Superconductivity
• /
• v.12 no.2
• /
• pp.114-117
• /
• 2011

We report our efforts on the development of Nb-based non-hysteretic Josephson junction fabrication process for quantu device applications. By adopting and modifying the existing Nb-aluminum oxide tunnel junction process, we develop a process for non-hysteretic Josephson junction circuits using metal-silicide as metallic barrier material. We use sputter deposition of Nb and $MoSi_2$, PECVD deposition of silicon oxide as insulator material, and ICP-RIE for metal and oxide etch. The advantage of the metal-silicide barrier in the Nb junction process is that it can be etched in $SF_6$ RIE together with Nb electrode. In order to define a junction area precisely and uniformly, end-point detection for the RIE process is critical. In this paper, we employed thin Al layer for the etch stop, and optimized the etch condition. We have successfully demonstrated that the etch stop properties of the inserted Al layer give a uniform etch profile and a precise thickness control of the base electrode in Nb trilayer junctions.

• Transactions of Materials Processing
• /
• v.21 no.8
• /
• pp.493-498
• /
• 2012

A wheel nut wrench is one of the hand tools used to loosen and tighten lug nuts on automobile wheels and it has generally a solid-type geometry for commercial vehicles. However, the solid-type wheel nut wrenches manufactured by hot forging processes exhibit several drawbacks such as heavy weight and rough surface finish. Thus, many efforts have been devoted to change the part geometry and improve the manufacturing process. For this purpose, the weight of the final product can be reduced drastically using a hollow tube as the initial stock, which can be manufactured by the more economical manufacturing process of cold forging. In this study, the cold forging of a hollow-type wheel nut wrench for commercial vehicles was designed based on the results of fundamental experiments and CAE analyses using the commercial finite element code DEFORM-3D. In addition, cold forging experiments were conducted on a special-purpose forming machine for hollow wheel nut wrenches in order to validate the designed process sequence. As results, it was found that the final products with a weight reduction of 39% and better surface appearance can be manufactured without any defect with the newly designed cold forging process.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.767-790
• /
• 2009

Setting up a priorityfor an embedded system is greatly significant because a release plan at the early stage of product developments can properly be established through right decision making procedures based on the priorities. For instance, both dependencies among requirements and the aspects of product developers should be considered into the priorities to improve the embedded system. Especially, trade-offs among the requirements, which are quite different depending on H/W and S/W architecture styles they use, should be acknowledged without exception. However, the selection process on the priority has hitherto been fairly systematic in the existing environment where hardware and software are not being considered at once. Therefore, this paper suggests an dependency and aspect-based model and process for the requirements of the priority. For this, the paper analyzes the trade-offs between the requirements depending on the disparate Architecture styles of H/W and S/W, and it also reflects the viewpoints of the developers. For thelast thing, the model and process suggested will be applied to the case of the development of both cell phones and cameras to gain authenticity and reliability. In conclusion, the danger occurring when the release plan is constructed can be minimized by screening the priorities that optimizes the embedded system more explicitly.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.562-564
• /
• 2002

In recent years, environments of our globe has been getting worse as a result of rapid growth of socioeconomic activities. The global environmental issues of acid rain, green house effect and ozone depletion are caused by various chemical pollutants, emitted from industries, automobiles and home. Most of these pollutants are produced by combustion processes. CO2 as a chief criminal of the greenhouse effect is a main combustion product of fossil fuels. Development of solid-state electrochemical devices for detecting CO2 is demonstrated based on various combination of solid electrolytes and auxiliary sensing materials. The object of this research is to develop various sensor performance for solid electrolyte gas sensor, and to test gas sensor performance manufactured. So we try to present a guidance for developing potential type gas sensor. We concentrated on development of manufacturing process and performance test.