• 한국정밀공학회지
• /
• 제13권12호
• /
• pp.129-135
• /
• 1996

This paper presents the effectiveness of the dynamic vibration absorber consisting of a single mass, coil springs and oil damper on the resonance freauency ratio and amplitude ratio for damped linear systems, that is, primary vibration system with damping. The effects of the dynamic vibration absorber are investigated numerically and experimentally for values of mass ratio, natural frequency ratio, and damping ratio. The experimental results show good agreement with calculated ones. As a result, the characteristics shown by the present work are useful in optimal tuning the dynamic vibration absorber in practice.

• 한국식품과학회지
• /
• 제45권4호
• /
• pp.473-477
• /
• 2013

혼합디자인에 의해 설정된 조건하에서 압출성형한 율무와 밀가루의 압출성형물은 율무 첨가에 대해 여러 반응 요인들이 압출성형물의 특성에 영향을 끼치는 것으로 나타났다. 실험조건은 율무 함량 5-75%, 밀가루 25-95%로 결정하였으며, 수분함량은 20.55%로 고정하여 modified distance based mixture design으로 실험설계 및 분석하였다. Bending 파손강도, WAI, a값 등은 유의성이 없는 것으로 나타났으나, 팽화물의 직경, WSI, L값, b값은 율무와 밀가루의 혼합에 의해 유의성이 존재하는 것으로 나타났다. 팽화물의 직경, L값, b값은 선형 모델로 분석할 수 있었으나 WSI는 quadratic 모델로만 설정이 가능한 것으로 나타났다. 율무의 함량이 많아질수록 외관적으로 팽창되어지는 정도가 적어졌으며, 색상도 어두워지는 것으로 나타났다. 율무의 함량이 증가할수록 L값은 77.84에서 72.73, a값은 1.37에서 1.77로, b값은 19.42에서 17.64로 이동되었다. WSI는 율무와 밀가루가 40%:60%로 혼합되어 압출성형되었을 때 가장 낮게 나타났으며, WAI는 율무와 밀가루 혼합 비율에 대해서는 유의성이 없는 것으로 나타났다. 혼합디자인 계획법은 시리얼류 제품 생산에 적합한 조직 형성과 반응량에 유의한 영향을 미치는 요인 등에 대해 적절한 혼합 비율과 가공 조건 등을 제시할 수 있음을 알 수 있었다. Modified distance based mixture design에 의해, 일반 시중 제품과 유사한 조직감을 나타낼 수 있는 율무와 밀가루, 물의 적정 배합 비율은 60.12:19.42:20.46으로 나타났다.

• Journal of applied mathematics & informatics
• /
• 제22권1_2호
• /
• pp.387-401
• /
• 2006

This paper deals with the problem of a ratio-dependent prey- predator model with combined harvesting. The existence of steady states and their stability are studied using eigenvalue analysis. Boundedness of the exploited system is examined. We derive conditions for persistence and global stability of the system. The possibility of existence of bionomic equilibria has been considered. The problem of optimal harvest policy is then solved by using Pontryagin's maximal principle.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.227-234
• /
• 2003

This study presents the stress evaluation equations of circular column-box beam connection in steel frame piers. FEM analysis were carried out for circular column-box beam connection. Analysis models were made for design parameters such as joint angle, span length-width ratio(L/B), sectional-area ratio(S=A/sub w/A/sub f/), and circular column-box beam stiffness ratio(Ic/Ib). Analysis results were compared to the existing equation. Based on analysis results the stress evaluation equations of circular column-box beam connection are proposed by regression analysis.

• 대한후두음성언어의학회지
• /
• 제23권2호
• /
• pp.129-132
• /
• 2012

Background and Objectives : MPT is directly related to degree of glottal closure. So it is widely used in the assessment of glottal closure with unilateral vocal fold paralysis. But MPT could be influenced not only by glottal closure but also by pulmonary function. So MPT might not reflect glottal closure in UVFP with decreased pulmonary function. The purpose of the study is to evaluate usefulness of MPT and ratio of /s/ time to /z/ time before and after injection laryngoplasty in UVCP with decreased pulmonary function. Materials and Methods : This study involved 34 patients with unilateral vocal fold paralysis : with decreased pulmonary function in group A (n=15) : with normal pulmonary function in group B (n=19). All patients underwent injection laryngoplasty. Paramters of perceptual analysis, acoustic analysis, aerodynamic analysis, videostroboscopy were compared between two groups. Results : Breathness and asthenic scale, G scale of perceptual analysis were significantly improved in both groups. Glottal gap index were significantly decreased after injection in both groups. In aerodynamic analysis, MPT was improved after injection laryngoplasty in both groups, but S/Z ratio was improved only in group B. In correlation analysis, /s/ time was not correlated with pulmonary function. Conclusion : S/Z ratio reflects neither the pulmonary function nor the glottal clousure properly. MPT is more useful indicator than S/Z ratio to evaluate vocal fold paralysis even with decreased pulmonary function.

• 한국미생물·생명공학회지
• /
• 제7권3호
• /
• pp.165-173
• /
• 1979

자연선조사한 대장균B주의 세포분열회복활성분을 구명코저 자외선내성균인 대장균 B/r 주의 초음파추출액으로부터 활성성분分을 분리한 결과 $\beta$-NAD가 관여함이 발표되었다. 본고에서는$\beta$-NAD 이외 Magnesium이 활성물질의 안정화가 중요한 역할을 나타냄을 구명하였으며 10~30%의 서당밀 도구배원심분리에 의해 2 개의 새로운 활성부분이 있음을 확인하였다. 2 개의 활성물질 가운데 하나는 원심관의 최하부에 위치하였으며 또 다른 하나는 상부의 분자량 45,000 부위에서 회수되었다. 하부에 위치한 활성획분은 Mg++이 그 활성에 무관하였으나 상부의 저분자 활성부분은 $Mg^{++}$을 첨가하지 않으면 회수가 불가능하였다. 저분자활성부분은 pronase에 대해 감수성이었으며 DNA-ligase 는 아님이 추정되었다. 초원심분리과정에 $N_2$ gas를 처리할 경우 aeration에 비해 약 2 배의 활성이 나타났다. $Mg^{++}$은 $\beta$-NAD에 또하나의 회복활성 및 필수적인자로 요구된다고 생각된다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1996년도 추계 학술대회지
• /
• pp.104-105
• /
• 1996

• 소성∙가공
• /
• 제15권7호
• /
• pp.512-517
• /
• 2006

In this paper, the cold extrusion process for internal spline forming using a thin and long tube has been analyzed by using a rigid plastic finite element code. The internal spline consists of 10 tooths. The cold extrusion process has been focused on the comparisions of load-stroke relation and filling states of the teeth according to design parameters. The design parameters involve extrusion ratio, extrusion angle and friction factor. The internal spline forming can cause the buckling and folding during the cold extrusion process because of using a thin and long tube. The optimum design parameters have been obtained through rigid-plastic finite elements analysis. The extrusion ratio and extrusion angle have great effects on the deformation characteristics of the cold extrusion process.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.498-500
• /
• 2004

QPSK (Quaternary Phase Shift Keying) will be adopted as the modulation of HRIT (High Rate Information Transmission) which is transmitted to COMS (Communication, Ocean and Meteorological Satellite) through HPA (High Power Amplifier) in ground segment. Due to the nonlinearity of HPA, IMD (Inter-Modulation Distortion) of multi-carrier signals and PAPR (Peak-to-Average Power Ratio) of modulated HRIT must be considered to estimate the output power of HPA. In this paper, we measured the PAPR to various the roll-off factor of RRC (Root Raised Cosine filter) which is filtering the modulated HRIT signal for reducing ISI (Inter-Symbol Interference) and bandwidth. It was found that the minimum PAPR is 2.78dB at 0.5 of roll-off factor for scrambled data. It's 2.78dB of P APR will be in output power selecting in COMS earth station.

• ETRI Journal
• /
• 제36권1호
• /
• pp.167-170
• /
• 2014

In this letter, we propose an unsupervised framework for speech noise reduction based on the recent development of low-rank and sparse matrix decomposition. The proposed framework directly separates the speech signal from noisy speech by decomposing the noisy speech spectrogram into three submatrices: the noise structure matrix, the clean speech structure matrix, and the residual noise matrix. Evaluations on the Noisex-92 dataset show that the proposed method achieves a signal-to-distortion ratio approximately 2.48 dB and 3.23 dB higher than that of the robust principal component analysis method and the non-negative matrix factorization method, respectively, when the input SNR is -5 dB.