• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.5 s.23
• /
• pp.75-80
• /
• 2002

Depending upon geographical features and surrounding errors in the survey field, inaccurate positioning is inevitable in a kinematic DGPs survey. Therefore, a data inaccuracy detection algorithm and an interpolation algorithm are essential to meet the requirement of a digital map. In this study, GPS characteristics are taken into account to develop the data inaccuracy detection algorithm. Then, the data interpolation algothim is obtained, based on the feature type of the survey. A digital map for 20km of a rural highway is produced by the kinematic DGPS survey and the features of interests are lines associated with the road. Since the vertical variation of GPS data is relatively higher, the trimmed mean of vertical variation is used as criteria of the inaccuracy detection. Four cases of 0.5%, 1%, 2.5% and 5% trimmings have been experimented. Criteria of four cases are 69cm, 65cm, 61cm and 42cm, respectively. For the feature of a curved line, cublic spine interpolation is used to correct the inaccurate data. When the feature is more or less a straight line, the interpolation has been done by a linear polynomial. Difference between the actual distance and the interpolated distance are few centimeters in RMS.

• Korea Trade Review
• /
• v.47 no.5
• /
• pp.39-57
• /
• 2022

This study aims to analyze the factors influencing exports of agricultural products(HS01~HS24) from China to Korea by estimating the gravity model with panel data from 31 provinces in China. The results of the empirical analysis from the panel Tobit model are as follows: The effects of GDP and GDP per capita on agricultural exports are reversed, but their impacts are different on exports of each product, notably HS03, HS07 and HS20. As expected, distance decreases Chinese agricultural exports, and the impact of the relative exchange rate variable is also statistically significant, although it differs from product to product. However, differences in latitude, which considers the heterogeneity of climate and agricultural production conditions between Korea and each Chinese region, does not seem to affect agricultural exports to Korea. The road length, which affects the logistical conditions of each province in China, is not statistically significant either. On the other hand, increases in the number of Chinese visitors to Korea raises the amount of Chinese agricultural exports, including exports of HS03 and HS20. The results also shows that after the Korea-China FTA agreements, agricultural exports have actually decreased, especially exports of non-processed agricultural products, such as HS07.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.32 no.2
• /
• pp.37-47
• /
• 2024

This paper examines the unique transportation challenges posed by Nepal's diverse and rugged terrain, which significantly hampers socio-economic development due to its negative impact on infrastructure, trade, and accessibility. Despite ongoing efforts to enhance road and traditional air transport systems, Nepal's geographic and environmental conditions continue to obstruct efficient connectivity, particularly in rural and remote areas. This study proposes Advanced Air Mobility (AAM) as a transformative solution, leveraging recent technological advancements in unmanned aerial vehicles (UAVs) and electric vertical takeoff and landing (eVTOL) aircraft. By conducting a comprehensive analysis of Nepal's current transportation infrastructure and the feasibility of AAM implementation, the paper highlights the potential benefits of AAM, including improved accessibility, economic growth, and environmental sustainability. Furthermore, it addresses the anticipated challenges and regulatory considerations necessary for integrating AAM into Nepal's transportation network. Through a multidisciplinary approach, this research aims to contribute to the discourse on overcoming transportation barriers in mountainous regions, offering policy recommendations and identifying areas for future study to facilitate the adoption of AAM in Nepal and similar contexts worldwide.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.129-140
• /
• 2004

In this paper, we conduct the research about optimal aggregation interval of travel time data on interrupted traffic flow and verify the reliability of AVI collected data by using car plate matching method in RTMS for systematic collection and analysis of link travel time data on interrupted traffic flow rural arterial. We perform Kolmosorov-Smirnov test on AVT collected sample data and on entire population data, and conclude that the sample data does not represent pure random sampling and hence includes sample collection error. We suggest that additional review is necessary to investigate the effectiveness of AVI collected sample data as link representative data. We also develop statistical model by applying two estimation techniques namely point estimation and interval estimation for calculating optimal aggregation interval. We have implemented our model and determine that point estimate is preferable over interval estimate for exactly selecting and deciding optimal aggregation interval. Our final conclusion is that 5-minute aggregation interval is optimal to estimate travel time in RTMS, as is currently being used our investigation is based on AVI data collected from Yang-ji to Yong-in $42^{nd}$ National road.

• Journal of Korean Society of Transportation
• /
• v.28 no.3
• /
• pp.131-143
• /
• 2010

This study has aimed to develop accident modification factor(AMF) for rural two-lane roadway segments. Accident Modification Factor is a coefficient to assess roadway safety as reflecting characteristics of homogeneous roadway. It estimates accident frequency of roadway segments with developed base model and exposure. We found on items of such factors as crosswalk, driveway density, topography characteristic, land use and median through statistical models and literature review. To develop accident modification factors, we used statistical model methods and analyses of applicability and expert judgement method were practiced to validate it. Although expert judgement for land use item was questionable, most items were rated acceptable. Result of comparative analysis revealed crash frequencies of IHSDM and KHSEM were most similar with actual. However, accident distribution of KHSEM was more proper than IHSDM. Also overall estimated values of RSDS were found to be overestimated.

• Clinical and Experimental Reproductive Medicine
• /
• v.2 no.2
• /
• pp.13-26
• /
• 1975

Seven aspects of attitude toward marriage in Korea are examined to better understand present and future marriage patterns. Also, various facets of current marriage practice are compared with attitudes. The study comprises three groups of roughly 600 women each, selected by random sampling from a rural, an urban, and a semi-urban area. A carefully designed and pretested questionnaire was checked for reliability by a reinterview in a 15% subsample. The great majority of Korean women support traditional attitudes that one must or should marry. The small group who recommend that one should not marry are mostly the very young or the never married, whose attitudes still may change. However, there are important and probably predictive shifts in favor of more individual decision, especially among the better educated, the young, and the more urban. Traditional reasons for marriage such as "custom" and procreation are ranked first by a majority, but there is a large shift to more contemporary or liberal desire for companionship and love, also primarily among the better educated, the urban, the young, and the never married. The traditional attitude that parents should have the sole or major role in mate selection is still held by a bare majority; the educated, urban, young, and never married are more liberal. Only 6% opt for each of the two extremes: That the parent alone or the respondent alone should decide. The remainder prefer one of the two middle-of-the-road positions where parent and child together decide. The proportions of respondents who classed specified criteria as moat important for selecting a husband, arranging the criteria in order from traditional to contemporary were: Lineage, etc., 23%; personal attributes, 40%; health and education, 27%; and love, 10%. The changing attitudes are suggested by the fact that love was ranked first by only 3% of the poorly educated rural poulation versus 23% of urban college level and 31% of the urban never married. There has been a substantial rise in the ideal age of marriage over the past twelve or more years, but there also is evidence that the ideal age is at or near a ceiling. Knowledge about legal age of marriage is minimal; the implications of this for proposed legislation are discussed. Three-fifthes to four-fifths of all respondents married husbands of the same religious, residential, and economic backgrounds as themselves. Almost all of them married men of the same or higher educational level. These evidences of traditional influences in mate selection are contrasted with the low priority given some of those items in earlier questions on reasons for marriage and criterion for selecting husband. Contrary to the expressed attitudes as to who should select the husband, we find that marriages of the study sample were stated to be arranged by parents alone in 62%; and in another 23%, the parents made the decision but asked the respondent's views. Such arrangements were most frequent among the rural, the less educated, and the older respondents and less common in the urban and more educated. The implications of these and related findings are discussed.

• Journal of Korean Society of Transportation
• /
• v.33 no.6
• /
• pp.554-563
• /
• 2015

This study dealt with developing an accident model for rural signalized intersections with random parameter negative binomial method. The limitation of previous count models(especially, Poisson/Negative Binomial model) is not to explain the integrated variations in terms of time and the distinctive characters a specific point/segment has. This drawback of the traditional count models results in the underestimation of the standard error(t-value inflation) of the derived coefficient and finally affects the low-reliability of the whole model. To solve this problem, this study improves the limitation of traditional count models by suggesting the use of random parameter which takes account of heterogeneity of each point/segment. Through the analyses, it was found that the increase of traffic flow and pedestrian facilities on minor streets had positive effects on the increase of traffic accidents. Left turning lanes and median on major streets reduced the number of accidents. The analysis results show that the random parameter modeling is an effective method for investigating the influence on traffic accident from road geometries. However, this study could not analyze the effects of sequential changes of driving conditions including geometries and safety facilities.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.2
• /
• pp.101-109
• /
• 2012

Traditional village forests in Jeju Island represent unique cultural landscape with a history of more than several hundred years as a national cultural asset in Korea. In this paper, the characteristics and meaning of traditional village forests in Jeju Island was compared with the Dangsan and Bibo forests at inland. There are 368 Oreums, parasitic volcano, and 391 shrines of Dang(Divine place) in Jeju. Life, culture and tradition of rural villages are all connected with the Dang and Oreum in Jeju. It has been found from this study that the village in Jeju were established as a cultural landscape on the surface of natural landscape. The features of traditional villages focused on the Dang and Oreum in Jeju Island were similar to the Dangsan and Bibo forestsat inland villages. The Oreum represents mountain and the Pojedan forest is newly found in Sangmyung-ri. The seashore areas are covered by vaocanic rocks in Jeju and large scale windbreaks are hardly found. The stone tower at Sinheung-ri built for blocking sand movement represents Bibo forest. The special attribute of the Dang in Jeju is that it is close to real life and believers are still remain. In 2009, the Jeju Chilmeoridang Yeongdeunggut ritual was nominated as an Intangible Cultural Heritage of Humanity by UNESCO. The shrine of Dang, however, has been degraded fast by construction of seashore road and Jeju Olle trail path. As for the world cultural heritage discussed at international conferences, it is important that there is sustainability on the right to enjoy cultural heritage. Integrated efforts from local residents, local governments and national government are needed to set up a management scheme for the Dang culture. Rural villages in Jeju with the Dang and Oreum are expected to get an international attention as to have traditional cultural landscapes of Korea.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.69-78
• /
• 2010

In order to investigate the degree of household dust contamination, 48 samples of household dust (24 from urban area and 24 from rural area) in Daegu city were collected in vacuum cleaner during January to February 2009. Samples were sieved below 100 ${\mu}m$, and 14 elements (Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, V, Zn) were analyzed using ICP after acid extraction. Results obtained from the source assessment of trace elements using enrichment factor showed that Ca, Fe, K, Mg, Mn, Na, and V were influenced by natural sources such as weathered rock and resuspended soil, while Cd, Cr, Cu, Ni, Pb and Zn were influenced by anthropogenic sources such as fuel combustion and waste incineration. Concentrations were remarkably higher in components from natural sources than in components from urban anthropogenic sources. Household dust in urban area was more affected by anthropogenic sources compared with that of rural area. Pollution index of heavy metals revealed that urban area was 1.8 times more contaminated with heavy metal components than rural area. The correlation analysis among trace elements indicated that components were correlated with natural sources-natural sources (Al-Mg, Al-Mn, Fe-Mn) and natural sources-anthropogenic sources (Al-V, Fe-Cr, V-Mn) in both urban area and rural area. Trace element components of rural area were more correlated than those of urban area. Houses that use oil for heating fuel had relatively higher contents of heavy metals rather than those using gas or electricity for heating fuel. Houses with children also had higher contents of heavy metals. In addition, the age of houses was found to influence the heavy metal levels in household dusts, with older houses (>10years) having higher concentrations than newer houses (<10years) and houses located near the major road (<10 m) were found to have relatively higher heavy metal levels in household dust.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.35-42
• /
• 2005

Few studies have been carried out to find out the interaction of design speeds, operating speeds, and posted speeds though they have a complementary relationships. As an attempt to find the relationships, this study measured the speeds of the free flowing vehicles at four lane rural highways. In comparison of 95th percentile speeds and inferred design speeds determined from the road design manual with the geometric features of each sites, operating speeds were constantly higher than the inferred design speeds at the sites where the inferred design speed is under 110km/h. and the reverse situation was observed at the sites where the inferred design speed is over 130km/h. In the comparison of operating speeds and posted speeds. the range of the 85th percentile speeds at the sites where posted speeds is 80km/h was distributed from 95km/h to 110km/h. and the range was distributed from the 105km/h to the 120km/h at the sites where posted speeds is 90km/h. Multiple regression analysis was used to develop prediction equations for mean. 85th. and 95th percentile speeds at approach and curve midpoint locations. At the midpoint, only posted speeds influenced the mean, 85th. At the approach locations, the mean, 85th, 95th percentile speeds were influenced by posted speeds and length of the approach tangent.