• Journal of Information Processing Systems
• /
• 제10권3호
• /
• pp.429-442
• /
• 2014

In this paper, we investigated the use of seasonal autoregressive integrated moving average (SARIMA) time series models for fault detection in semiconductor etch equipment data. The derivative dynamic time warping algorithm was employed for the synchronization of data. The models were generated using a set of data from healthy runs, and the established models were compared with the experimental runs to find the faulty runs. It has been shown that the SARIMA modeling for this data can detect faults in the etch tool data from the semiconductor industry with an accuracy of 80% and 90% using the parameter-wise error computation and the step-wise error computation, respectively. We found that SARIMA is useful to detect incipient faults in semiconductor fabrication.

• International Journal of Aeronautical and Space Sciences
• /
• 제1권2호
• /
• pp.17-21
• /
• 2000

In order to correct the strut interference in wind tunnel tests, image methods are conventionally used. Because of their excessive extra runs, some alternatives have been tried to reduce the extra runs. In this study, these alternatives were reviewed and checked by the strut interference evaluation with the panel code, CMARC. The present work shows that the strut interference is free from neither model configuration nor model attitude. This dependency makes the alternatives to the image method unfeasible. The 3-run image method was also evaluated. It worked well even for the exaggerated windshield. At this point, reducing the image runs by neglecting parameters affecting minor influence would be best.

• 한국시뮬레이션학회논문지
• /
• 제11권3호
• /
• pp.1-12
• /
• 2002

Experimental design in simulation provides an efficient way of economizing simulation runs since a considerable number of simulation runs that originally were planned can be reduced by this approach. This experimental design method is an active area of research together with the output analysis and so no single panacea seems to exist so far. Thus, selection of techniques of experimental design and output analysis more likely depends upon the objective of simulation analysis, budget constraint and sometimes the analyst's subjective judgment. This paper attempts to describe an experimental design methodology for port investment analysis using a case study in a bulk terminal in Korea. Detailed display will be focused on simulation period, warm-up period, the number of replications needed in production runs after brief explanation on the system configuration.

• 한국농공학회지
• /
• 제41권6호
• /
• pp.33-43
• /
• 1999

Drought is a serious diaster in agriculutre, especially to upland crops. Hence, the Agricultural Drought Analysis Model (ADAM) that is integratable with GIS was applied to analyae agriculture drought in upland. ADAM is composed of two sub-models , one is a Soil Water Balance Model (SWBM) and the other is a Drougth Analysis Model (DAM) that is based on the Runs theory. The ADAM needs weather data, rainfall data and soil physical characteristics data as input and calculates daily soil moisture contents. GIS was integrated to the ADAM for the calculation of regional soil moisture using digitized landuse map, detaile dsoil map, thiessen network and district boundary . For the agriculutral drought analysis, the ADAM adapt the Runs theory for analyzing drought duration, severity and magnitude . Log-Pearson Type-III probability distribution function and Kolmogorov-Smirnov test were used to test the fitness of good of the model. The integration of ADAM with GIS was successfully implemented and would be operated effectively for the regional drought analysis.

• Journal of the Korean Statistical Society
• /
• 제33권1호
• /
• pp.35-58
• /
• 2004

For fixed positive integers and $\textit{k}\;(n\;{\geq}\;{\textit{k}}\;+\;2)$, the exact probability distributions of non-overlapping and overlapping patterns of two failures separated by (i) exactly $textsc{k}$ successes, (ii) at least $\textit{k}$ successes and (iii) at most $\textit{k}$ successes have been obtained for Bernoulli independent and Markov dependent trials by using combinatorial technique. The waiting time distributions for the first occurrence and the $r^{th}$ (r > 1) occurrence of the patterns have also been obtained.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.623-628
• /
• 1990

This paper describes the design of EFbus(ETRI Fieldbus), EFbus was designed from the interim results of international Fieldbus standardization in IEC (International Electrotechnical Commission) and proposals of many companies. The design was performed and described on the basis of three layered architecture. Application layer S/W runs on IBM PC and provides services which is similar ED MMS in MAP to user application Data linklayer runs on Intel's iDCX96 real time executive and uses centralized media accesscontrol method. Physical layer uses Manchester encoding & decoding, twisted pair fines and RS485 electrical standard.

• 대한산업공학회지
• /
• 제13권2호
• /
• pp.97-103
• /
• 1987

Skip-Lot sampling plan is formulated in terms of renewal process. This approach facilitates studying the average outgoing quality in a short production run of length t, AOQ (t). By numerical studies it is found that the long-run average outgoing quality (AOQ) greatly overestimates AOQ (t) for short runs.

• 한국항공운항학회지
• /
• 제20권1호
• /
• pp.26-33
• /
• 2012

Competition between air transportation and railways has grown fiercer in major countries around the world with the rise of high-speed railways. In South Korea, air passenger travel has been rapidly decreasing since the initial launch of the Seoul-Pusan KTX line in 2004 and second opening that followed in 2010. Further expansion of the high-speed railway is expected. At present, research efforts to verify the validity of constructing an underwater express railway tunnel between Ho-nam and Jeju Island are taking place. Considering the possible high speed railway connection between Seoul and Jeju Island, this thesis has analyzed the choice behavior of existing passengers of the major and low-cost carriers. For this, Stated Preference (SP) research has been performed for three variables, including fare, travel time and the number of runs, to estimate the substitution rate of each of the three variables. Binomial Logit Model has been estimated with the obtained data. The estimation of the model has found that airline passengers of major and low-cost carriers are willing to pay approximately 7,200 KRW and 5,000 KRW, respectively, to reduce travel time by one hour. If the number of runs in one day increases, it has been estimated that the passengers are willing to pay additional fares of about 390 KRW and 30 KRW, respectively. On the other hand, the substitution rate between the number of runs and the travel time was found to be somewhat insignificant. If the construction of the Seoul-Jeju line progresses in the future, this study could be used as preliminary data for determining fares, travel time and the number of runs.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.247-250
• /
• 2006

현재 고밀도 반도체제작 환경에서는 Reactive ion Etching (RIE) 과정에서의 생산성을 극대화하기 위해서 비이상적인 공정장비를 발견하는 것이 매우 중요하다. 생산과정에서 오류발견의 중요성을 설명하기 위해 Support Vector Machine (SVM)은 실시간으로 공정오류에 대한 판단에 대한 도움을 주기 위해 사용되었다. baseline run으로부터 얻은 데이터로 SVM 모델을 구성하고 정상인 run 데이터와 비정상 run 데이터로 SVM 모델을 검증한다. 통계적 공정제어에서 흔히 이용되는 control limits를 도입하여 정상데이터가 내재하고 있는 램덤 변화율이 반영된 SVM 모델 기반의 control limits를 수립하고, 그 control limits를 바탕으로 오류발견을 실행한다. SVM을 이용함으로써 RIE의 오류발견은 run to run 기반에 정상인 run데이터는 0% 오류율이 증명되었다.

• Journal of Microbiology and Biotechnology
• /
• 제15권5호
• /
• pp.938-945
• /
• 2005

For elucidating excessive growth of biofilm that subsequently leads to the clogging problem in a small town's sewer lines of Wisconsin, the FISH method was employed. At the beginning of the simulated experiments, ${\beta}$-subclass proteobacteria prevailed in runs fed with industrial wastewater, while ${\gamma}$-subclass proteobacteria dominated in runs with domestic wastewater. However, the bacterial community structure changed significantly over six weeks; Cytophaga-Flavobacterium (CF)­group bacteria dominated in most runs fed with the small town's wastewater regardless of their source, while CF-group decreased strongly in run fed with domestic sewage from another city (Madison). It was also microscopically confirmed that most of those clogging materials was toilet tissue, which in turn may lead to vigorous growth of cellulose-degrading CF-group bacteria. This dominant presence of CF-group bacteria in the small town's sewer indicates that the main constituent of biofilm, toilet tissue (cellulose) in sewage, might have induced the unique pattern of their microbial community structure. Therefore, it suggests that molecular technique is useful for monitoring the clogging problems in sewer lines.