• Journal of Biosystems Engineering
• /
• 제3권1호
• /
• pp.1-19
• /
• 1978

Power tiller is a major unit of agricultural machinery being used on farms in Korea. About 180.000 units are introduced by 1977 and the demand for power tiller is continuously increasing as the farm mechanization progress. Major farming operations done by power tiller are the tillage, pumping, spraying, threshing, and hauling by exchanging the corresponding implements. In addition to their use on a relatively mild slope ground at present, it is also expected that many of power tillers could be operated on much inclined land to be developed by upland enlargement programmed. Therefore, research should be undertaken to solve many problems related to an effective untilization of power tillers on slope ground. The major objective of this study was to find out the travelling and tractive characteristics of power tillers being operated on general slope ground.In order to find out the critical travelling velocity and stability limit of slope ground for the side sliding and the dynamic side overturn of the tiller and tiller-trailer system, the mathematical model was developed based on a simplified physical model. The results analyzed through the model may be summarized as follows; (1) In case of no collision with an obstacle on ground, the equation of the dynamic side overturn developed was: $$\sum_n^{i=1}W_ia_s(cos\alpha cos\phi-{\frac {C_1V^2sin\phi}{gRcos\beta})-I_{AB}\frac {v^2}{Rr}}=0$$ In case of collision with an obstacle on ground, the equation was: $$\sum_n^{i=1}W_ia_s\{cos\alpha(1-sin\phi_1)-{\frac {C_1V^2sin\phi}{gRcos\beta}\}-\frac {1}{2}I_{TP} \( {\frac {2kV_2} {d_1+d_2}\)-I_{AB}{\frac{V^2}{Rr}} \( \frac {\pi}{2}-\frac {\pi}{180}\phi_2 \} = 0 $$ (2) As the angle of steering direction was increased, the critical travelling veloc\ulcornerities of side sliding and dynamic side overturn were decreased. (3) The critical travelling velocity was influenced by both the side slope angle .and the direct angle. In case of no collision with an obstacle, the critical velocity $V_c$ was 2.76-4.83m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ ; and in case of collision with an obstacle, the critical velocity $V_{cc}$ was 1.39-1.5m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ (4) In case of no collision with an obstacle, the dynamic side overturn was stimu\ulcornerlated by the carrying load but in case of collision with an obstacle, the danger of the dynamic side overturn was decreased by the carrying load. (5) When the system travels downward with the first set of high speed the limit {)f slope angle of side sliding was $\beta=5^\circ-10^\circ$ and when travels upward with the first set of high speed, the limit of angle of side sliding was $\beta=10^\circ-17.4^\circ$ (6) In case of running downward with the first set of high speed and collision with an obstacle, the limit of slope angle of the dynamic side overturn was = $12^\circ-17^\circ$ and in case of running upward with the first set of high speed and collision <>f upper wheels with an obstacle, the limit of slope angle of dynamic side overturn collision of upper wheels against an obstacle was $\beta=22^\circ-33^\circ$ at $\alpha=0^\circ -17.4^\circ$, respectively. (7) In case of running up and downward with the first set of high speed and no collision with an obstacle, the limit of slope angle of dynamic side overturn was $\beta=30^\circ-35^\circ$ (8) When the power tiller without implement attached travels up and down on the general slope ground with first set of high speed, the limit of slope angle of dynamic side overturn was $\beta=32^\circ-39^\circ$ in case of no collision with an obstacle, and $\beta=11^\circ-22^\circ$ in case of collision with an obstacle, respectively.

• 한국철도학회논문집
• /
• 제15권4호
• /
• pp.343-351
• /
• 2012

차세대 고속열차(HEMU-430X)는 연구 지원과 많은 연구 기관의 노력으로 다년간 개발 중인 한국형 고속열차이다. 열차 모델을 다물체 동역학 해석 모델로 개발하여 차량-궤도 안전성 해석을 수행하였다. 이를 통해 국제 철도 안전 기준인 UIC code 518 OR에 따라 탈선 평가와 횡압의 제한 값을 확인하였다. 국제 기준에 따른 안전성 평가를 통하여 앞으로 본선 운전에 필요한 안전 확보 기본 자료를 생성하였으며 최고 속도에서의 안전성을 확인하였다.

• Wind and Structures
• /
• 제27권4호
• /
• pp.255-267
• /
• 2018

This paper investigated the wind-snow flow around the bogie region of a high-speed train under crosswinds using a coupled numerical method of the unsteady Realizable $k-{\varepsilon}$ turbulence model and discrete phase model (DPM). The flow features around the bogie region were discussed and the influence of bogie fairing height on the snow accumulation on the bogie was also analyzed. Here the high-speed train was running at a speed of 200 km/h in a natural environment with the crosswind speed of 15 m/s. The mesh resolution and methodology for CFD analysis were validated against wind tunnel experiments. The results show that large negative pressure occurs locally on the bottom of wheels, electric motors, gear covers, while the positive pressure occurs locally on those windward surfaces. The airflow travels through the complex bogie and flows towards the rear bogie plate, causing a backflow in the upper space of the bogie region. The snow particles mainly accumulate on the wheels, electric motors, windward sides of gear covers, side fairings and back plate of the bogie. Longer side fairings increase the snow accumulation on the bogie, especially on the back plate, side fairings and brake clamps. However, the fairing height shows little impact on snow accumulation on the upper region of the bogie. Compared to short side fairings, a full length side fairing model contributes to more than two times of snow accumulation on the brake clamps, and more than 20% on the whole bogie.

• 한국철도학회논문집
• /
• 제10권6호
• /
• pp.800-805
• /
• 2007

철도차량용 대차의 한계 성능에 대한 검증은 설계 검증 및 안전성 확보관점에서 매우 중요하다. 차량의 안정성과 관련된 대차의 임계속도는 차량 개발 단계에서 총상 주행시험대를 이용하여 시험을 수행한다. 그러나 실물 대차를 이용한 시험과정에서 다양한 시제차량 제작 및 시험 조건 설정의 어려움, 시험 소요시간의 과다 등에 의한 단점을 내포한다. 따라서 철도 선진국등에선 과거 오래전부터 축소모델을 이용한 차량 개발 연구가 활발하였다. 따라서 본 연구에서는 대차의 임계속도 및 동적 거동 분석을 위하여 상사기법을 적용한 축소대차를 제작하였고 이를 시험하기 위한 축소 주행 시험대를 개발하였다. 축소대차 임계속도에 대한 수치해석을 수행하였으면 주행시험대상에서의 임계속도 시험을 통하여 해석결과가 시험결과에 부합함을 확인할 수 있었다.

• 한국지반공학회논문집
• /
• 제29권1호
• /
• pp.5-12
• /
• 2013

철도노반에서 임계속도효과는 시간영역에서의 유사-공진현상으로서 차량의 주행속도와 노반표면파의 군속도대역이 중첩되면서 에너지가 증폭되는 현상을 의미한다. 과거에는 열차의 주행속도가 낮고 지반의 군속도가 높았기 때문에 문제가 되지 않았으나, 열차속도가 고속화되면서 임계속도효과가 궤도틀림에 영향을 미치는 것으로 보고되고 있다. 현재까지는 임계속도에 대하여 주로 이론적인 분석만 제시되었는데 실질적인 임계속도효과를 효율적으로 평가하기 위해서는 궤도 및 노반의 지지강성을 현장조건과 유사하게 고려하는 것이 필요하다. 그래서 본 논문에서는 유한요소해석을 이용하여 궤도 및 노반의 지지조건을 고려한 임계속도해석을 수행하였다. 궤도조건은 자갈궤도와 콘크리트궤도로 구분하였으며 노반의 지지강성은 10~300MPa범위에서의 임계속도영향을 평가하였다. 해석결과 노반의 지지강성에 따른 변형증폭을 확인하였으며, 궤도지지조건에 대한 임계속도영향도 매우 큰 것으로 나타났다.

• 오토저널
• /
• 제4권1호
• /
• pp.20-30
• /
• 1982

Recent diesel engine has achieved high speed running comparable to that of gasoline engine as a speed improvement effort. Consequently, torsional vibration of high-speed diesel engine induced vibration nosise, reduced horsepower and the like. Viscous damper which is thought to be effective in curtailing the torsional vibration was studied over a wide range of speed. In this investigation, a water cooling, 4-cycle high-speed diesel engine(Msx. 3500 rpm)was used for the study. Theoretical analysis was made by assuming the engine to be an ideal equivalent system(length, moment of inertia) i. e. the multi-degree of freedom equivalent torsional vibration system with damper was analyzed. In the analysis, the inertia moment of suitable damper for this experiment was calculated by varying the relative damping coefficient of damper of engine for each damper. Furthermore, in the torsional vibration experiment, the torsional vibration amplitude of the crankshaft system was measured when the engine was equipped with dampers of different moments of inertia and also when the engine was equipped without dampers. The experimental results were compared with the analytical values and were found to be satisfied. The results of this investigation are summarized below; (1) It was found that for the engine equipped with dampers, the torsional vibration amplitude was reduced to about one third of those without dampers. (2) The optimum value of inertia moment of viscous damper for the engine was found to be about Id=1.05(kg.cm.s$^{2}$) (3) The optimum damping coefficient and the ratio of moment of inertia for the engine were found to be about Ca= 850(kg.cm.s), Rd=0.509, respectively (b1 dapmper).

• Smart Structures and Systems
• /
• 제18권1호
• /
• pp.53-74
• /
• 2016

This paper presents an experimental study on constructing a tunable secondary suspension for high-speed trains using magneto-rheological fluid dampers (referred to as MR dampers hereafter), in the interest of improving lateral ride comfort. Two types of MR dampers (type-A and type-B) with different control ranges are designed and fabricated. The developed dampers are incorporated into a secondary suspension of a full-scale high-speed train carriage for rolling-vibration tests. The integrated rail vehicle runs at a series of speeds from 40 to 380 km/h and with different current inputs to the MR dampers. The dynamic performance of the two suspension systems and the ride comfort rating of the rail vehicle are evaluated using the accelerations measured during the tests. In this way, the effectiveness of the developed MR dampers for attenuating vibration is assessed. The type-A MR dampers function like a stiffness component, rather than an energy dissipative device, during the tests with different running speeds. While, the type-B MR dampers exhibit significant damping and high current input to the dampers may adversely affect the ride comfort. As part of an ongoing investigation on devising an effective MR secondary suspension for lateral vibration suppression, this preliminary study provides an insight into dynamic behavior of high-speed train secondary suspensions and unique full-scale experimental data for optimal design of MR dampers suitable for high-speed rail applications.

• Wind and Structures
• /
• 제29권4호
• /
• pp.247-270
• /
• 2019

Wind-resistant design of existing cooling tower structures overlooks the impacts of rainfall. However, rainstorm will influence aerodynamic force on the tower surface directly. Under this circumstance, the structural response of the super-large cooling tower (SLCT) will become more complicated, and then the stability and safety of SLCT will receive significant impact. In this paper, surrounding wind fields of the world highest (210 m) cooling tower in Northwest China underthree typical wind velocities were simulated based on the wind-rain two-way coupling algorithm. Next, wind-rain coupling synchronous iteration calculations were conducted under 9 different wind speed-rainfall intensity combinations by adding the discrete phase model (DPM). On this basis, the influencing laws of different wind speed-rainfall intensity combinations on wind-driving rain, adhesive force of rain drops and rain pressure coefficients were discussed. The acting mechanisms of speed line, turbulence energy strength as well as running speed and trajectory of rain drops on structural surface in the wind-rain coupling field were disclosed. Moreover, the fitting formula of wind-rain coupling equivalent pressure coefficient of the cooling tower was proposed. A systematic contrast analysis on its 3D distribution pattern was carried out. Finally, coupling model of SLCT under different working conditions was constructed by combining the finite element method. Structural response, buckling stability and local stability of SLCT under different wind velocities and wind speed-rainfall intensity combinations were compared and analyzed. Major research conclusions can provide references to determine loads of similar SLCT accurately under extremely complicated working conditions.

• 한국축산시설환경학회지
• /
• 제7권3호
• /
• pp.147-154
• /
• 2001

가축의 행동에 대한 관심이 치근 고조되고 있으며, 향후에는 가축복지법의 규제도 받게 될 실정인데 비하여 우리 나라는 아직 동물과 환경과의 관계에 대한 연구가 미진한 실정이다. 돈사의 구조적 특성은 돼지에게 여러 가지 측면에서 영향을 미쳐 생산성을 좌우하게 될 뿐만 아니라 동물복지 차원에서도 연구가 진행되어야 할 시점이다. 따라서 본 실험은 무창 육성·비육돈사에서 계절별 환기시스템에 따른 휴식공간을 파악하고자 하였으며, 또한 측벽밀폐 비율이 돼지의 배분 습성에 미치는 영향을 조사하고자 하였다. 1. 돈방 측벽밀폐율을 50%, 75%, 100% 세수준으로 하였을 때 돼지의 배분습성은 온도, 습도, 공기유속과 상관없이 일정한 지역에 배분하는 행동을 보였다. 따라서 돼지는 돈방내의 어두운 지점에서 배분하는 것으로 관찰되어 무엇보다도 조명의 영향을 받는 것으로 나타났다. 2. 측벽 밀폐율에 따른 분뇨의 배분집적 높이는 50% 일 때 10cm, 75%는 5cm 그리고 100%일 때는 3 cm가 직접 되었으며, 폭은 각각 30 cm, 25 cm, 20 cm로 나타났다. 3. 돈방의 휴식공간에서의 암모니아 농도는 각 돈방 측벽의 배분율이 50%일 때 $4.2mg/{\ell}$, 75%는 $5.1mg/{\ell}$ 그리고 100%일 때 $5.8mg/{\ell}$그리고 100% 일 때 $5.8mg/{\ell}$으로 측정되어 돈방바닥면에 분뇨가 넓게 분포되는 100%일 때 암모니아의 농도가 가장 높았다. 이것을 배분습관과 연관되어 돈방내의 어두운 부분을 최소한 줄일 경우 휴식공간에서의 암모니아 농도는 줄일 수 있는 것으로 판단되었다. 4. 요인중 돼지의 휴식공간의 위치 영향에서 환경변인은 무엇보다도 공기유속인 등 하다. 겨울철에는 0.03 m/g 지점에서 휴식을 하였으며, 여름철에는 0.24 m/g 지점에서 휴식을 취하였다. 따라서 돼지의 휴식공간은 공기의 유속에 의한 영향이 매우 큰 것으로 관찰되었다.

• 한국철도학회논문집
• /
• 제14권6호
• /
• pp.526-534
• /
• 2011

본 연구에서는 고속철도의 자갈궤도와 콘크리트궤도에서 열차 주행 안전 측면에서 관리해야 할 레일패드 강성의 상한값을 차량 및 궤도의 동특성과 운영환경을 고려하여 결정하는 방법을 제시하였다. 차량-궤도의 상호작용해석의 중요 입력 파라메타인 궤도틀림과 관련하여 프랑스 및 독일에서 제시한 고저틀림 PSD(파워 스펙트럼 밀도)와 경부고속철도 1단계 구간 자갈궤도 및 콘크리트궤도에서 계측한 고저틀림 자료를 통하여 얻은 PSD를 기초로 하여 넓은 범위의 주파수 영역에서 적용할 수 있는 자갈궤도와 콘크리트궤도의 고저틀림 PSD를 제시하였다. 제시된 PSD 기준 모델을 사용하여 시간 영역에서의 고저틀림 입력을 난수 생성(random number generation)을 통하여 구한 후 차량-궤도 상호작용 해석기법을 사용하여 레일패드 강성에 따른 윤중 감소율을 산정하였다. 산정된 윤중 감소율에 대하여 국내 철도차량 안전기준에 관한 규칙의 탈선계수 규정을 적용하여 주행 안전 측면에서 허용할 수 있는 레일패드 강성의 상한값을 제시하였다.