• Journal of the Korean Society for Railway
• /
• v.11 no.2
• /
• pp.115-119
• /
• 2008

Korean Train Express (KTX) has opened to commercial traffic since 2004 at maximum speed 300km/h. As the speed of the train becomes higher, the conditions of the rail affect the behavior of the running train. To secure the safety and reliability of high speed railway, it is necessary to inspect rail irregularities and to maintain the rail regularly. The authors designed the high speed rain measurement system over 300km/h. And we installed the system to Korea High-speed Railway (HSR 350x). In this paper, we introduce the high speed rail measurement system for HSR 350x and show verification of the performance of the system through test runs.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.837-841
• /
• 2004

In order to improve the speed of railway, several parameters and/or technical issues, which are affecting speed improvement negatively, need to be considered in addition to the enhancement of physical performance of the railway system such as maximum speed, speed at curve, and speed at turnout track. The parameters under complicated situation of railway system are from the areas of rolling stocks, track, power system, signalling, etc. In general, two different aspects of technical issues can be evaluated; Technical issues in the hardware aspect and technical issues in the software aspect. The hardware parameters include running performance, braking performance, and power performance, while the software factors are rules, regulations, and riding quality. In this investigation, a comparison study between hardware and software aspects in technical issues was conducted to provide technical information on the amendment of railway speed-up regulations.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.969-974
• /
• 2008

As the railway becomes higher, the reliable stability and riding comfort of higher railway are required. To improve the riding comfort of high-speed trains, it is very helpful to use active suspension system for railway. In Japan, the high-speed train, Shinkansen has adopted semi-active suspension system and now it is running in the main trunk. In this paper, the authors introduce several technical trends of vibration control methods of Japanese Shinkansen. And the installation of semi-active suspension to HSR 350x and the test result of test run on the Kyoung-Bu high speed ling are also explained. After development of HSR 350x, new R&D national project of high speed train is progressed by Ministry of Land, Transport, and Maritime Affairs. This project is the development of Electric Multiple Unit of high speed train with 400km/h of maximum test speed. These result would be helpful to progress next generation high speed project.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.461-464
• /
• 1999

To improve traction effort performance and stability for the Korean High-Speed Railway Train, practical re-adhesion controller including a novel anti-slip control scheme is proposed. The presented method is verified by train running simulation results based on induction motor vector control with PWM inverter.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.193-201
• /
• 2002

The development of railway vehicle and bogie involves the proper selection of design parameters not only to achieve high speed but also to reduce the vibration of the train. In this study an analytical model of a high speed freight car is developed to find the critical speed. The high speed freight car can generate the snake motion of the lateral and yawing motion of the car body, the bogie, and the wheelset. Numerical analysis for the nonlinear equation motions with 17 degrees of freedom showed the running stability and critical speed due to the snake motion. Also, the vibration modes of tile high speed freight car was calculated using ADAMS RAIL, which showed that the critical speed have the yawing modes of the car body and the bogie. Finally, this paper shows that the snake motion of the vehicle can be controlled with the modifications of the design parameters.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.909-914
• /
• 2009

A suspension is the most prior apparatus to decide vehicle's running safety and ride comfort, also the suspension stiffness is the most important parameter for the designing of the vehicle. Providing the strong stiffness with the primary suspension in order to improve the running safety with high speed, but it causes a problem with a curve running performance of a railway vehicle. Therefore, many studies deal with the optimal value of suspension stiffness. In this paper, we aim to optimize the suspension system to improve running safety by varying stiffness values of railway vehicle suspension. We have proceeded an analysis by design variables which are position, length, width, stiffness and damping coefficients of primary and secondary suspension to optimize the suspension characteristics. As a result of the optimization, we verified that the derailment coefficients of inside and outside of wheel are decreased in comparison with initial model.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1142-1147
• /
• 2011

The rail cant produces a wider bearing area between the wheel and the rail by moving the wheel-rail contact area away from the gauge towards the centre of the railhead, thus improving the wear pattern of the railhead and wheel treads. It is essential to keep the rail cant within the allowable range to ensure optimum track geometry. Neglecting the rail cant geometrical parameters in a track quality evaluation can cause safety of railway vehicle and serviceability problems. In this paper, we examined the effect of the rail cant in general geometry state of the railway track using VI-Rail and analyzed running safety when the railway vehicle passing through curves depending on change of the rail cant and running speed.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1922-1928
• /
• 2011

The rail inclination produces a wider bearing area between the wheel and the rail by moving the wheel rail contact area away from the gauge towards the centre of the railhead, thus improving the wear pattern of the railhead and wheel treads. It is essential to keep the rail inclination within the allowable range to ensure optimum track geometry. Neglecting the rail inclination geometrical parameters in a track quality evaluation can cause safety of railway vehicle and serviceability problems. In this paper, we examined the effect of the rail inclination in general geometry state of the railway track using VI-Rail and analyzed running safety when the railway vehicle passing through curves depending on change of the rail inclination and running speed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1323-1326
• /
• 2004

A bogie frame of welded type have some problems. Some end beam has cracked. The cracks have profound influence on the safe freight service. The bogie consists of a frame, suspensions, brakes and wheel sets. Various analyses including a numerical simulation using a finite element method, a static load test, a fatigue test, and running test should be carried out to design the bogie. However cracks have been found at some end beams of the bogies mounted on the freight cars running with the high speed. The cracks of the end beam results in deterioration of the brake performance and the running safety. Numerical simulations and dynamic tests are carried out to figure out the causes of cracks in the existing bogie, and the vibrational characteristics of the improved bogie are compared with those of the conventional one. In this reports, the vibration characteristics were dealed with the most pressing matters for the solution of the end beam crack.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.831-835
• /
• 2007

Energy Saving is one of worldwide emerging issues. These days, applicable techniques of railway vehicle's regenerative energy are investigating in worldwide railway industries. Energy saving methods are "Downsizing energy loss" and "Re-utilizing kinetic energy". Useful plans for Downsizing energy loss are "adjusting operation table" and "optimizing running pattern". Furthermore, regenerative energy that is produced with decreasing speed and stoping, is an important element with reducing vehicle's weight, raising equipment 's efficiency, decreasing running resistance and re-configurating running pattern. Sustainable energy storage mass : Flywheel, EDLC(electrical double layer capacitor) and Secondary battery are applied in overseas, but these cases are not reported within the country. This research is reported for problems and economical validity that comes from by installing sustainable regenerative energy storage system in korean railway industries.