• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.378-383
• /
• 2004

Bogie is the connection device between carbody and wheel. It is the core part that exert a important effect on the passenger safety and running safety. Bogie largely consist of bogie frame, suspension, brake, wheel set. Static and Dynamic load have acted on it complexly. So when the bogie is designed, finite element method, static load test, fatigue test running test should be considered. Some bogie frame of high speed railway freight car have the problem. It's end beam was cracked. The crack of the end beam have a bad effect on brake system. ROTEM co. made an improved end beam and applied one set to freight car. this report showed the vibration characteristic which was compared conventional bogie to improved bogie for running safety.

• 전기학회논문지
• /
• 제60권10호
• /
• pp.1903-1914
• /
• 2011

In this paper, we propose vehicle running characteristic simulator. The developed simulator is configured by two induction motors which are directly coupled with each other. One motor is to simulate the vehicle drive and another motor is to simulate the vehicle dynamic load including running resistance, gradient resistance and adhesive characteristics between rail and wheel. The running characteristics of vehicle are modeled by numerical formulas. These are programed by software of embedded controller. Thus, it is possible to change several running characteristics during the running test freely and instantly. To evaluate the feasibility of the simulator, the experiments on slip and adhesion coefficient are performed. Additionally the adhesion control and speed control of vehicle are tested with simulator. Experimental results show that the simulator can produce the driving characteristics similar to the vehicle system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1537-1538
• /
• 2011

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1905-1913
• /
• 2011

The dynamic characteristic of bogie that is driving system of railway vehicle is very important regarding decision of vehicle characteristics as running safety and comport. The dynamic characteristic test of bogie is tested on full size in place on field testing on track. But, the testing on the full size caused many problems. To overcome these problem by full size test, the Railway Safety Research Center in Seoul National University of Science & Technology developed 1/5 scale size of small scale derailment simulator and is currently testing running stability of 1/5 scaled bogie. Also To take effectively advantage of running stability test using small scale derailment simulator in actuality design and reliability estimation, it is necessary comparison and examination with field test and theoretical analysis result In this paper. to achieve running stability analysis of 1/5 scaled bogie on small scale derailment. the program using MATLAB that is fast compose and analysis the motion equation of Saemaul power bogie is developed. It is achieved analysis according to various specification (weight, size, suspension, etc..) and is evaluated corelation between test result and dynamic characteristic of actual railway vehicle.

• 농촌계획
• /
• 제18권4호
• /
• pp.61-67
• /
• 2012

Recently, brick walls are being widely introduced in rural areas. Walls are a very important design element of space. However, most brick wall works do not consider the human psychological characteristics. The purpose of this study was to investigate psychological characteristics on brick wall bonds such as the stack bond, running bond, english bond, flemish bond, america bond. The results of the research can be summarized as follows: 1)There is no statistical difference of psychological evaluation results among student groups using the semantic differential scale method using 10 adjectives. 2)Stack bonds have an uninspiring, artificial, simple, restful, boring and ordered psychological characteristic. Running bonds have an uninspiring, restful and ordered psychological characteristic. America bonds have a unique and modernistic psychological characteristic. English bonds have a unique, modernistic, complex and chaotic psychological characteristic. Flemish bonds have no critical psychological characteristics. 3)The running bond earned the highest score in preference, while the stack bond scored the lowest. Employment of brick wall bonds on this study was not highly preferred, hence it is necessary to develop a new brick wall bond design. 4)In conclusion, the proper selection of brick wall bonds is very important and we should consider human psychological characteristics in the design of rural areas.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권1호
• /
• pp.85-91
• /
• 1998

In this paper, an influence of inlet pressure on the running characteristics of tilting pad thrust bearing is studied by a numerical analysis. The inlet pressure is obtained from the extended Bernoulli equation including the loss coefficient which is varied with the operating conditions. The running characteristic parameters such as the minimum film thickness, the film pressure and the film thickness ratios are calculated for various runner speeds with constant load in particular two pivot positions. The results are shown that the inlet pressure has a large influence on the minimum film thickness and other running characteristic parameters.

• 한국ITS학회 논문지
• /
• 제15권1호
• /
• pp.77-86
• /
• 2016

운전자는 다양한 종류의 교통정보를 여러 방식을 통해 받을 수 있지만, 인적요소를 고려한 정보 서비스는 이루어지지 않고 있다. 본 연구는 운전자 인적요소에 대한 기초 연구를 실행하기 위해 고속국도 주행 시 다양한 주행환경에서 속도의 차이에 따른 운전자 평균 주시시간의 특성 분석을 목표로 하였다. 분석 시 속도 외에 영향을 줄 수 있는 변수를 통제하기 위하여 주행상황을 '주간에 선행 차량 없이 주행', '주간에 선행 차량이 존재하는 상황에서 주행', '야간에 선행 차량 없이 주행', '야간에 선행 차량이 존재하는 상황에서 주행' 4가지로 분류하였다. ANOVA Test를 활용하여 속도 그룹을 나누었으며 그룹별 평균 주시시간의 차이를 비교하기 위해 다중비교(multiple comparison)를 한 결과 도로, 선행 차량 항목은 속도가 증가함에 따라 평균 주시시간이 증가하고 전경 항목은 평균 주시시간이 감소하는 것으로 나타났다. 도로표지 항목은 속도에 따라 주시시간의 차이가 통계적으로 무의미한 것을 확인할 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.713-718
• /
• 2006

In this study, temperature sensors were adhered to transformer that is used in KHST(Korean High-Speed Train) to verify variation of temperature characteristics about transformer synthetically and efficiently. In the case that temperature of transformer exceeds reference temperature for running of KHST, overheating of transformer may cause a fatal accident of vehicle. Characteristics and main specifications of transformer in KHST were described in this paper. Also, measuring system for temperature measurement of transformer was explained in brief. Temperature data of transformer was acquired using measuring system, KRRI(Korea Railroad Research Institute) analyzed characteristic in contrast with comparing with temperature of transformer about month, running speed and running time.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.57-60
• /
• 2004

A domestic's freight stock is about 14,000 cars. Most of them is consisted of casting bogie type. Casting bogie type has some problems such as maintenance, part abrasion, running safety etc. Now a day casting bogie type have replaced with welded type bogie for high speed. The maximum speed of the container freight car is 70km/h limit at empty weight condition in case of casting type bogie frame. So there are some difficulty in commercial service for high speed coaches. Then we should re-decide whether the casting bogie type has speed up 90km/h limit at empty weight through out the vibration characteristic.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1292-1296
• /
• 2004

This study is experimented results of running characteristics about electric locomotive. it executed to study a power quality in the substation of Honam electrification line and to promote knowledge, observation and management in electric rail-system. we measured to know the more exactly running characteristics that electric locomotive and electric substation at the same time.