• 대한교통학회지
• /
• 제8권1호
• /
• pp.5-15
• /
• 1990

As a result of the lack of methodology for the determination of navigational channel capacity and the consequence lack of effective management of traffic, navigational channels are often grossly underutilized or highly congested. The traditional rule of first-come-first-served admission of vessels to channels is not efficient as it assumes equal time intervals between entrance of consecutive vessels. A new vessel traffic management system is developed in this research and methodologies to measure the improvement in the channel capacity are developed. Methodology to measure the channel performances for three queue disciplines are developed. The effects of changes in major factors on the channel capacity model such as channel length, fleet mix and arrival rate, as well as changes in strategy are analyzed. Under given channel conditions, best strategy are recommended. Also, a method for effective stochastic channel capacity simulation was developed. The results of analysis and as ertions are compared with the results of simulation runs to prove their applicability.

• 전자공학회논문지C
• /
• 제34C권5호
• /
• pp.93-102
• /
• 1997

Conventional expert systems have difficulties in the inference on time-varing situations because they don't have the structure for processing time related informations and rule representation method to describe time explicitely. Some expert systems capable of temporal reasoning are not applicable to the domain in which state changes happen by unpredictble events that cannot be represented by periodic changes of data. In this paper, an event based temporal reasoning method is proposed. It is capable of processing te unpredictable events, representing the knowledge related to event and time, and infering by that knowledge as well as infering by periodically time-varing data. The NEO/temporal, an temporal inference engine, is implemented by applying the proposed temporal reasoning situation assessment and decision supporting system is implemented to show the benefits of the proposed temporal information processing model.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권8호
• /
• pp.437-443
• /
• 2003

In this paper an expert system is developed to decide the resetting area of protective devices in power transmission systems. A configuration change in power transmission networks from a substation extension such as new line or bus addition need resetting of protective devices around the point of configuration changes. To find the resetting area in complex power system is very difficult, especially when the distance protective relays are considered to be reset. The proposed expert system, in this paper to find the resetting area has many rules based on the changes of fault currents and apparent factors from the power system alteration. It solves the problem to find relay resetting area using the network information in the database and the rule-base. The case study shows a result of the problem to find relay resetting area in KEPCO system when there is any configuration change.

• 복식문화연구
• /
• 제4권2호
• /
• pp.207-217
• /
• 1996

The founding of ching costume system starts from the rule issued in second year of Te-chong reign that the clothing of Manchu people is prohibited to be chinesized. It has undergone many revisions and is officially established in the 37th year of Chien-lung reign. This study is Emperor's costumes during the year in Chien-lung reign. The results are as follows: Emperor's costumes go to the travel are Chi-fu hat and Hsing-fu. Sea-dragon hat changes on otter skin or beaver hat and Ching-rong and ching-ni hat changes velvet hat. Light green informal wear is to be worn once a year. Name of sacrificial robes does not exist in Ching-hui-dien-tu but it take the place of Chao-fu I and Chao-dai II in Chuan-dai-dang-an. Sacrificial robes wear with indigo boots and the other cases wear blue boots and shoes and socks. The shape on ornaments in belt of sacrificial robes is tetragon style.

• 한국디지털건축인테리어학회논문집
• /
• 제3권2호
• /
• pp.39-46
• /
• 2003

Now we using purpose area rule of city planning code in city planning areas for efficient, economical use of land and increasement of common welfare. Architectural code restrict building purpose after each division of area and this aimed for making more comfortable and convenient living atmosphere in city environment. Through this research we extracted conclusion about purpose area distinction system and restriction of building purpose after examined changes and tendencies of these rules. And the conclusion is the changes of purpose area distinction system issued from 32 kinds of distinctions in 1978, 28, 30, 32 kinds of distinctions in 1992 to 21kinds of distinctions in 1999 are caused by demand of enabling different purposes of programs can exist within one building possible.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.8-8
• /
• 1993

Field-aligned(Birkeland) currents of the High-latitude polar region are to the linkage between the solar wind-magnetosphere system and the ionosphere. The characteristics of field-aligned currents at an attitude of 1300 km have been investigated from the KiSat-A satellite magnetometer data recorded at SatRec form March to May 1993. It is found that the po1arity of both east-west and south-north magnetic components becomes reversed and distorted across the poleward edge. We suggest that these changes May occur rule to the Region 1 and Region 2 currents. It is also suggested that the current time resolution which is about 30 seconds, should be improved to prove gradual polarity changes in the polar region. In addition, it is shown how the observational results depend on the longitude in the high-latitude region.

• 한국안광학회지
• /
• 제5권1호
• /
• pp.117-123
• /
• 2000

굴절이상 이외의 안과적 질환이 없는 난시성 굴절이상안 164명 328안을 대상으로 타각적, 자각적 굴절검사를 시행하여 난시축의 성별, 연령별 분포, 난시의 정도와 굴절이상의 종류에 따른 난시의 분포를 분석하였다. 전체난시안은 직난시가 248안(75.61%), 도난시가 80안(24.89%)으로 나타났고, 각막 난시안은 적난시가 272안(82.93), 도난시가 54안(16.46%)이었으며 잔여난시는 도난시가 298안(90.85%), 적난시가 4안(1.21%), 난시가 없는 경우가 26안(7.93%)으로 나타났다. 6세에서 56세 이상의 난시안에서 평균 난시도는 0.92D 직난시, 평균 잔여난시도는 0.579D 난시, 평균 전체난시도는 0.342D 직난시로 나타났다. 전체난시는 성별에 따른 관련성은 없었으며 연령에 따른 변화는 30세 이후에 직난시에서 도난시로 변화되는 경향을 보였는데 각막난시 역시 30세 이전에는 직난시 경향을 보이다가 30세 이후부터 도난시로 변화하는 양상을 보였고 잔여난시는 연령에 따른 특별한 유의성이 없었다.

• 한국안광학회지
• /
• 제8권1호
• /
• pp.41-45
• /
• 2003

노인성 백내장의 세 가지 형태학이 굴절이상에 미치는 영향에 관하여 연구하기 위해 세 가지 형태의 백내장 특성에 따른 구면 굴절력과 원주 굴절력의 변화를 백내장의 형태적인 위치에서 나타내었고 또한 백내장 수술 전후의 안압이 굴절이상에 어떠한 영향을 주는가에 대하여 연구하였다. 등가 구면 굴절력에서 핵 백내장은 근시성 전환, 피질 백내장은 원시성 전환을 보였고 낭 백내장은 양쪽의 전환 폭이 적은 것으로 나타났다. 수정체 내 백액내장의 해부학적 위치를 확인하기 위해 광학단면(세극등)을 이용하여 관찰하였고 굴절이상을 측정하기 위해 타각적, 그리고 자각적 방법을 사용하여 등가 구면 굴절력으로 나타내었다. 안압 측정은 수술전과 수술 후 인공수정체가 삽입된 일주일 뒤에 다사 각각의 상태에서 안압을 자동 안압계를 사용하여 측정하였다. 원주 굴절력의 변화는, 일반적으로 나이가 증가함에 따라 안축의 길이가 감소하는 경향을 보였지만, 백내장의 진행으로 안압이 높아져 안축의 길이가 증가하게되고 그 영향으로 직난시에서 도난시로의 전환에 영향을 주기도 하고 또한 이것이 안압으로 인해 더욱 증가하기도 함을 알 수 있었다.

• 폴리머
• /
• 제28권6호
• /
• pp.460-467
• /
• 2004

폐폴리(염화 비닐) 수지 [waste poly(vinyl chloride), RPVC]와 폐폴리에틸렌 수지 (waste polyethylene, RPE)를 용융 블렌드하여 이들의 형태학적 특성과 유변학적 성질을 관찰하였다. 대수 가감 법칙 (Log additivity rule)으로 계산된 값과 측정된 토크 변화를 비교해보면, 고분자 블렌드는 서로 비상용성을 나타내는 음의 편차 거동을 보였다. 평형판 레오미터와 모세관 레오미터를 사용하여 측정한 블렌드의 유변학적 성질은 용융 상태에서 전단 속도가 증가함에 따라 전단 점도가 감소하는 경향을 보였다. RPVC/RPE 블렌드에 상용화제를 첨가하면 단순 블렌드보다 전단 점도가 증가하였으며 이는 상용성이 증가하여 분산상 크기가 감소하는 것을 확인하였다. 전단 점도 측정 후 얻은 시료를 전자 현미경으로 관찰해 보면 전단속도가 증가함에 따라 분산상의 크기가 약간씩 커지는 것이 관찰되었고 또한, 시료의 표면층보다 내부의 분산상이 커지는 것이 관찰되었다.

• 한국IT서비스학회지
• /
• 제22권5호
• /
• pp.71-86
• /
• 2023

Recently, various geographic information systems have been used based on spatial information of geographic information systems. Accordingly, it is essential to produce a large-scale map as a small-scale map for various uses of spatial information. However, maps currently being produced have inconsistencies between data due to production timing and limitations in expression, and productivity efficiency is greatly reduced due to errors in products or overlapping processes. In order to improve this, various efforts are being made, such as publishing research and reports for automating domestic mapping, but because there is no specific result, it relies on editors to make maps. This is mainly done by hand, so the time required for mapping is excessive, and quality control for each producer is different. In order to solve these problems, technology that can be automatically produced through computer programs is needed. Research has been conducted to apply the rule base to geometric generalization. The algorithm tolerance setting applied to rule-based modeling is a factor that greatly affects the result, and the level of the result changes accordingly. In this paper, we tried to study the effectiveness of mapping according to tolerance setting. To this end, the utility was verified by comparing it with a manually produced map. In addition, the original data and reduction rate were analyzed by applying generalization algorithms and tolerance values. Although there are some differences by region, it was confirmed that the complexity decreased on average. Through this, it is expected to contribute to the use of spatial information-based services by improving tolerances suitable for small-scale mapping regulations in order to secure spatial information data that guarantees consistency and accuracy.