• Journal of Information Technology Services
• /
• v.11 no.sup
• /
• pp.103-111
• /
• 2012

In epigraph field to study ancient scripts, alternative readability improvement technologies have been developed to replace existing rubbing method which has low resolution and causes surface pollution of heritages from the viewpoints of extraction process and used materials. Recently many methods which are based on analysis of pixel data for extracting outlines of the specific image have been developed with advancement of image processing techniques. But these methods are not applicable and the results are not satisfied in the damaged inscriptions which are weathered by wind and rain for a long time and in the narrowed one. In this paper laser scanning techniques which uses optical triangulation measurement principle are developed to minimize scanning error. The proposed techniques are consisted of 3 parts：(1) the understanding of optical triangulation measurement principle to find scanning guideline (2) determinations of points interval, scanning distance and scanning angle to guarantee scanning data quality (3) identification of valid point data area which will be used in registration process. The proposed character identification method contributed in decoding an ancient inscription on SeukBingGo in Kyungju.

• Journal of Fashion Business
• /
• v.16 no.2
• /
• pp.138-150
• /
• 2012

Nano Inkjet DTP technology, a new technology introduced recently, can be applied to various types of fabric, and pre-treatment process can be omitted, which makes the whole printing process compact. Some important factors for DTP are color difference between the color selected by the designer on PC and the color on the final product and durability of the final fabrics. In this study, the twenty-three trend colors of 2012-2013 F/W suggested by PeclersParis have been picked to be printed on cotton, silk and polyester fabrics, then K/S and ${\Delta}E$ value and color fastness were measured. The results show that dyeability of fabric is varied for each color group, and that also tone of color affect to dyeability when measured for colors in the same group. In general, for all fabric, light fastness, washing fastness and color fastness to sublimation are outstanding. However, because of poor rubbing fastness, additional treatment to fix colorant on fabric is required.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.4
• /
• pp.229-235
• /
• 2014

This study conducted a research on burn-out printing convergence technology for cellulose blend knit fabrics. Printing technology, which forms color pattern on the fabric, can be generally classified into four according to printer or printing method, e.g. screen printing, roller printing, rotary printing, digital printing. However, these printing methods are flat in design or pattern, which have limitation to overcome monotonousness of fabric, so that recently burn-out process method, which expresses three-dimensional pattern effect by treating chemical on the surface of fabric as the method to appeal its esthetics to the customers. Particularly, in case of cellulose/polyester composite material, first, it is proceeded in 2 processes, by dyeing cellulose or polyester fabric and burning out cellulose fabric, in this process, due to pollution caused by disperse dye migration, color of polyester fabric part could be discolored, which has high falt risk. This research considered coloring burn-out technique, which simultaneously proceed dyeing and burn-out by reducing dyeing and burn-out process to 1 stage, which were proceeded in 2 stages previously. As the research result, it was confirmed that reasonable depth of roller was 0.04~0.06mm in roller printing process, heat treatment condition of burn-out far-infrared radiation was $185^{\circ}C{\times}30m/min$. Color fastness to washing was confirmed to be 4-5 grade, color fastness to rubbing, 3-4 grade, color fastness to light, 4 grade. Also, it was confirmed that energy reduction effect appeared 38.19%, in case of energy cost per yard compared to the existing production, also, 19.74%, in case of production cost.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.35 no.1
• /
• pp.24-37
• /
• 2022

Objectives : The purpose of this literature review is to analyze process of manufacture and formulation and toxicity of Geumgweyoryak(金匱要略)'s external applicants for modern and safe using. Methods : This study used the Geumgweyoryak(金匱要略) reprinted by Zhao Kaimei(趙開美) as basic data for a understanding of the manufacture and formulation and toxicity for external applicants. Among the 25 chapters, the 22 chapters were studied except for the last three chapters, which are known to be written by later writers. Based on the above, Geumgweyoryeok(金匱要略)'s external applicants was analyzed the process of manufacture, formulation and the toxicity. Results : There are 11 types of external applicants of Geumgweyoryak(金匱要略). Washing method(洗法) was used 2 times, Drop method(瀝法) was used 1 time, Smoke method(熏法) was used 2 times, Rubbing method(摩法) was used 1 time, Plaster method(敷法) was used 2 times, Invading method(浸法) was used 1 time, Suppository method (坐法) was used 2 times, Flatiron method(烙法) was used 1 time. According to classified the modern formulation, there are 4 types of powder formulation, 4 types of liquid formulation, 2 types of suppository, and 1 type of Semi-solid formulation. Especially toxic drugs, such as Realgar(雄黃) or Hydrocerussite(鉛粉), should be careful. When Realgar(雄黃) smokes, a toxic substance called AS2O3 can come out. Hydrocerussite(鉛粉) can cause lead poisoning. Lead increases the risk of anemia, dehydration, and lead neuropathy when chronically exposed. Conclusion : We supposed that this study can serve as a basic data to help clinical Korean doctors to use the prescription for external applicants more safely and to easily apply it in the form of external applicants.

• The Research Journal of the Costume Culture
• /
• v.21 no.6
• /
• pp.967-973
• /
• 2013

During high speed sewing, the needle thread is exposed to dynamic loading, short strike loading, inertia forces, friction, rubbing, force of check spring, bending, pressure, friction, impact, shock and thermal influence. The dynamic thread loading/tension alters throughout the stitch formation cycle and along its passage through the machine. The greatest tensile force occurs at the moment of stitch stretching, when the take up lever pulls for required thread length through the tension regulator. These stresses act on the thread repeatedly and the thread passes 50-80 times through the fabric, the needle eye and the bobbin case mechanism, before getting incorporated into the seam, which result in upto 40% loss in tensile strength of the sewing thread. This damage in the sewing thread adversely affects its processing and functional performance. In this paper, the contribution of dynamic loading, passage through needle and fabric, and bobbin thread interaction in the loss in tensile properties has been studied. It is observed that the loss in tensile properties occurs mainly due to the bobbin thread interaction. Dynamic loading due to the action of take up lever also causes substantial loss in tenacity and breaking elongation of cotton threads.

• The Research Journal of the Costume Culture
• /
• v.24 no.5
• /
• pp.577-587
• /
• 2016

Natural dye extracted from Salicornia bigelovii was applied to silk fabrics by dip dyeing process. The dyeing properties and the functionalities of the silk fabrics were determined. Factors affecting the dyeing properties such as dyestuff concentration, temperature, time and pH were studied. The colorimetric parameters $L^*$, $a^*$, $b^*$, and H, V/C values were measured to select the optimal mordanting conditions. The color-fastnesses of the dyed and mordanted fabrics were estimated for practical use; in addition, the antibacterial property, ultraviolet protection properties were evaluated. The dyeabilities of silk increased depending on the increasing dye concentration, dyeing time, and dyeing temperature. And optimum dyeing results were achieved when dyeing with 300% (o.w.f.) of dye concentration at $90^{\circ}C$ for 100 minutes and at pH 3. The dyed silk fabrics without mordants produced yellow (Y) color and showed yellow (Y) or green yellow (GY) colors depending on the mordants type. The light fastness of dyed and Al mordanted silk fabrics were found to be excellent, and the drycleaning and rubbing fastness were good. The dyed silk fabrics showed no antibacterial property, but Al and Cu mordanted silk fabrics showed 99.9% reduction rate. The ultraviolet protection properties of the dyed silk fabric was improved. And the ultraviolet protection properties of mordanted samples showed very good ultraviolet protection properties.

• Textile Coloration and Finishing
• /
• v.28 no.4
• /
• pp.280-289
• /
• 2016

Silica microgel was prepared by sol-gel process and then functional groups, epoxy group and ethoxy group, were introduced on the particle by coupling treatment with 3-glysidoxypropyltrimethoxysilane. The functional silica microgel(functional SiGel) formation was identified using FT-IR spectrometry. Phase stability for DMF solution of functional SiGel, PU resin and pigment was evaluated by Turbiscan Lab. And physical properties of artificial suede including hand values, morphology and dyeing fastness were investigated. The mean particle size and the specific surface area of the functional SiGel were $0.77{\mu}m$ and $380m^2/g$. Mixture containing the functional SiGel, PU resin and pigment was more stable than the functional SiGel-free mixed solution. Artificial suede prepared by the functional SiGel had appearance and feeling close to natural suede. The migration fastness, the solvent wicking fastness and rubbing fastness of the artificial suede were enhanced to 4~5 grades, 4~5 grades and 3~4 grades, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.776-779
• /
• 2006

The alignment of liquid crystal (LC) is one of the key issues of liquid crystal display (LCD) technologies. In this study, we aligned polyimide (as the LC alignment layer) by ALT plasma beam and to realize the stability and characteristics of this technology. The characteristics such as anchoring energy, pre-tilt angle, voltage holding ratio(VHR) and residual direct current(Rdc) were discussed. Besides, we applied it to the in plane switch (IPS) mode 23" WXGA real panel, the performance parameters and electrical properties were measured and compared with those of rubbing alignment. From the result, we demonstrated a successful LC alignment treatment process in real panel by ALT plasma beam.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.12
• /
• pp.768-772
• /
• 1999

A new TFT-LCD panel with air-bridge type gate to data line inter-crossing has been proposed and its characteristics have been measured. The proposed structure has air-gap between gate and data line inter-crossing. This air-bridge TFT-LCD panel has very small capacitance between gate and data line. The new panes structure achieves 9 times fast signal propagation compared with conventional panel, which enables to have enough design margin for 20-inch diagonal and larger size UXGA panel. We have examined thermal and mechanical durability of new panel to verify applicability for commercial AMLCD production. After TEOS and polyimide passivation, this panel withstood a thermal stress at $250^{\circ}C$ and a mechanical stress during the rubbing process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.635-640
• /
• 2005

In this paper, we have improved a novel high tilted optically compensated bend (OCB) (HTOCB) mode by using high tilt angle that was generated by the unique baking condition on the homeotropic alignment layer. The high tilt angle of liquid crystal (LC) was generated by new alignment process that tilt angle changed homeotropic state to homeogenous state using Hot-plate equipment; we obtained about $40\~50^{\circ}$ tilt angle with negative and positive dielectric anisotropy on the homeotropic polyimide (PI), and then LC tilt angle decreased as increasing baking temperature and time. At last, we obtained about $10^{\circ}$ with positive type NLC $({\Delta}n>0)$. Also, the LC tilt angle of positive type NLC $({\Delta}n>0)$ decreased as increasing rubbing strength at the same baking temperature and time. The novel LC operating mode (HTOCB) that used the high tilt angle by the new alignment method was improved. The response time of the novel HTOCB cell was faster than that of conventional OCB cell. We suggest that the developed the novel HTOCB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of a fast response time and a high contrast ratio.