• 공업화학
• /
• 제34권4호
• /
• pp.347-356
• /
• 2023

액정 엘라스토머 섬유는 1차원 형태로서 소프트 로봇, 생체모방 구동기 등의 다양한 분야에서 광범위하게 응용되고 있다. 액정 엘라스토머는 액체의 유동성과 고체의 질서도 그리고 고무의 탄성을 포함하며 이를 바탕으로 한 자극-응답성을 가지고 있다. 특히, 형상가변 측면에서 열, 빛, 전기장, 자기장 등의 다양한 자극에 대한 응답성을 프로그래밍하여 사용하면 높은 자유도와 더불어 물건 들어올리기, 꼬임, 회전 등 다양한 움직임을 구현할 수 있다. 따라서, 액정 엘라스토머 섬유는 인공근육, 소프트로봇, 웨어러블 기술, 센싱 기술 등 다양한 분야로의 응용가능성을 가지고 있다. 이런 액정 엘라스토머 섬유의 연구는 기존 단순 섬유를 넘어서는 다양한 기능성을 포함할 수 있는 스마트 소재로서 도래한 4차 산업에서 다양한 분야에 활용도가 높다고 평가된다. 본 총설에서는 액정 엘라스토머 섬유의 구조 및 기본 특성에 대해 소개하고, 배향 기반 제작법과 이를 이용한 인공근육, 스마트 패브릭, 소프트 로봇 등, 다양한 응용에 대해 최신 연구 동향을 소개한다.

• Journal of Forest and Environmental Science
• /
• 제39권1호
• /
• pp.27-39
• /
• 2023

Twenty-five Eucalyptus clones (14 E. camaldulensis - EC and 11 interspecific eucalypt hybrid clones - EH) grown in three contrasting sites were evaluated for the growth and few wood traits at 4 years of age. The stability, genotype-site interaction and suitability of these clones for pulp and solid wood industry sectors were studied. Growth of eucalypt clones was significantly higher at site 1 with higher rainfall, but wood density did not differ significantly from lower rainfall sites. Kraft pulp yield (KPY) decreased from sites 1 to 3 based on moisture availability, but not between two groups of clones. Volumetric shrinkage (VS) was significantly higher in EC clones at site 3 with lowest rainfall, but there was no specific trend at other two sites with maximum (site 1) and intermediate (site 2) rainfall. The mechanical traits modulus of rupture (MOR) and modulus of elasticity (MOE) were at par in sites 1 and 2, but significantly lower at the driest site 3. The growth rate had a significant positive correlation with KPY, MOR and MOE and a negative correlation with VS, but no significant impact on wood density in both groups of clones. Genotype×environment interaction (G×E) was evident in most traits due to the difference in response of clones to moisture availability. Since wood density was negatively correlated to KPY, it has to be kept at an optimum level for the profitability of pulp industry. There was no significant difference between EC and EH clones for most traits except VS at site 3. Stability of clones varied across sites in different traits, and hence clones may be selected for deployment at each site by screening for growth, followed by wood density, considering the relationship of growth and density with other traits required by pulp and solid wood industry sectors.