• 한국작물학회지
• /
• 제26권4호
• /
• pp.357-362
• /
• 1981

홍화증수를 위한 알맞는 재식밀도를 구명하고 그에 따를 수량 및 농업 형질의 변이를 조사하기 위하여 1980년 3월부터 10월30일까지 강원도 원주상지대학 실습포장에서 실험을 실시하여 얻은 결과를 요약하면 다음과 같다. 1. 초장은 휴폭과 주간이 좁을수록 커지는 것으로 나타났으며 이들 양자에 의해 영향을 받았다. 2. 주당 분지수는 휴폭과 주간이 좁아짐에 따라 감소하였으며 이를 양요인에 의해 영향을 받았다. 3. 지표면에서 제1분지까지의 높이는 주간에 의해 영향을 받으며, 좁을수록 그 위치가 높아졌다. 4. 초장은 휴폭과 부의 상관을 가지며, 초장과 제1분지까지의 높이는 휴폭x주간과 부상관을 갖는다. 또한 주당 분지수는 휴폭, 휴폭x주간과는 정상관, 초장과는 부상관을 보였다. 5. 수량은 주간, 휴폭x주간에 관하여 부상관을 가지며 제 1분지의 높이와는 정상관을 가졌다. 6. 수량은 주간에 의해 크게 영향을 받으며 다음은 주간xs휴폭이 영향하는 것으로 나타났다. 휴폭은 수량에 크게 영향하지 않으나 30cm 또는 40cm구가 가장 증수되었으며 주간은 5cm구가 가장 증수되어 30cm x 5cm구, 또는 40cm x 5cm구가 홍화의 증수를 위한 적철한 재식밀도인 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제13권4호
• /
• pp.621-640
• /
• 2017

The double-row long-short composite anti-sliding piles system is an effective way to control the landslides with high thrust. In this study, The double-row long-short composite anti-sliding piles with different load segment length (cantilever length) and different pile row spacing were studied by a series of physical tests, by which the influences of load segment length of rear-row piles as well as pile row spacing on the mechanical response of double-row long-short composite anti-sliding pile system were investigated. Based on the earth pressures in front of and behind the piles obtained during tests, then the maximum bending moments of the fore-row and the rear-row piles were calculated. By ensuring a equal maximum moments in the fore-row and the rear-row piles, the optimum lengths of the rear-row piles of double-row long-short composite system under different piles spacing were proposed. To investigate the validity of the reduced scale tests, the full-scale numerical models of the landside were finally conducted. By the comparisons between the numerical and the physical test results, it could be seen that the reduced scale tests conducted in this study are reliable. The results showed that the double-row long-short composite anti-sliding piles system is effective in the distribution of the landslide thrust to the rear-row and the fore-row piles.

• Journal of Biosystems Engineering
• /
• 제40권1호
• /
• pp.35-46
• /
• 2015

Purpose: To present a flexible and accurate autonomous solution for creating any desired row spacing value between the hydroponic gullies in multilayer growing units, and evaluate the capabilities and performance of the relevant automated system through the use of virtual prototyping technique. Methods: To build the virtual prototype of the system, CAD models of its different parts, including an autonomous vehicle and the mechanical mechanisms embedded in the multilayer growing unit, were developed and imported into the RecurDyn simulation software. In order to implement the automated row spacing operation, three spacing modes with different loading cycles and working steps were defined, and the operation of the system was simulated to obtain the target row spacing values specified for each of these modes. Results: Motion profiles related to the horizontal displacement of: 1) the lower and upper sliding bars installed in the cultivation layers, and 2) the hydroponic gullies, during the simulation of the system operation, were generated and analyzed. No deviation from the specified target spacing values was observed at the end of simulations for all spacing modes. Conclusions: The results of the motion analysis obtained by simulating the system operation confirm the effectiveness of the control scheme proposed for automated row spacing of gullies. It was also found that proper sequencing of the loading cycles and the precision of the working strokes of the upper bars are the critical factors for establishing a certain row spacing value. Based on the simulation results, precise control of the back and forth motions of the upper bars is highly necessary for sound operation of the real system.

• 한국작물학회지
• /
• 제7권1호
• /
• pp.133-137
• /
• 1969

This experiment was conducted to determine the optimum row width and plant spacing within row under the tropical environment for a leading soybean variety Palmetto and it was carried out at Eakmat Experiment Station in Vietnam. The experiments were arranged in a split plot design with four replications and the test was repeated twice in two years. Variations for seed yield due to the distance between rows were significant at 1 per cent level in 1967 test(dry season growing) and at 5 per cent level in 1968 test. Significant differences for plant height, lodging, maturity, number of branches per plant, and number of pods per plant due to the row width were not found in both tests, while significant differences in difference spacing within row was found in all traits studied. Interaction between width of row and spacing within row for seed yield and plant height were found at five percent level in 1967 test. These results indicate that close planting may increase in seed yield and plant height in both seasons, and decrease in loadging. From these studies, one could be understood that the plant population, particularly in dry season, plays decisive roles on seed yield in soybean culture, and the maximum plant height and minimum value of lodging index were also observed in closest spacing plots. The highest soybean yield in late planting would be expected by a combinations of 30 cm(between rows)${\times}$5cm(between hills) plot, while 40cm ${\times}$ 5cm planting method would be suggested for rainy season growing. Highest seed yield was obtained at closet spacing in both dry and rainy season, and these results led to drilling method in seeding where about 20 seeds per meter of row could be recommended. Besides the seed yield, the close planting may produce some advantages, such as increase plant height and decrease lodging, weeds and erosion of surface soil.

• 설비공학논문집
• /
• 제22권8호
• /
• pp.538-544
• /
• 2010

An experimental investigation is presented to study the effect nozzle spacing, jet to plate spacing and Reynolds number on the local heat transfer to normally upward impinging submerged circular water jets on a flat heated surface. Nozzle arrays are a single jet(nozzle dia. = 8 mm), a row of 3 jets(nozzle dia. = 4.6 mm, nozzle spacing = 37.5 mm) and a row of 5 jets(nozzle dia. = 3.6 mm, nozzle spacing = 25 mm), and jet to plate spacing ranging from 16∼80 mm(H/D = 2∼10) is tested. Reynolds number based on single jet exit condition is varied 30000∼70000($V_o$ = 3∼7 m/s). Except for the condition of H/D = 10, the average Nusselt number of multi-jet is higher than that of single jet. For H/D = 2, average Nusselt number is increased by 50.3∼82.5% for a row of 3 jets and by 52.9∼65.2% on a row of 5 jets when compared to the average Nusselt number on the single jet.

• 한국자원식물학회지
• /
• 제17권2호
• /
• pp.102-106
• /
• 2004

남부 지방의 답전작 재배에 적합한 왕골의 재식밀도를 구명코자 다수성 품종으로 선발된 광산조생종을 공시하여 시험했다. 그 결과, 경장, 분얼수, 출수된 경수, 경태 등의 수량구성형 질은 18${\times}$18 cm 이식구에서 가장 우수하였고, 건피수량, 건수 수량에서도 18${\times}$18 cm 이식구에서 가장 우수하였다.

• 한국작물학회지
• /
• 제37권4호
• /
• pp.335-338
• /
• 1992

제주지방에 있어서 녹두의 적정휴간거리 밝히고자 1988년부터 1990년에 주간거리와 주당 본수를 각각 10cm, 2본으로 하고 휴간거리를 20(50주 / m$^2$), 30(33.3주 / m$^2$), 40(25주 / m$^2$), 50(20주 / m$^2$), 60(16.7주 / m$^2$)cm로 달리함에 따른 선화녹두의 생육 및 수량을 조사한 결과를 요약하면 다음과 같다. 개화시와 성숙시는 휴간거리에 영향을 받지 않았으나 경장, 본당 협수, 협당 립수, 1000립중 등은 휴간거리가 좁아짐에 따라서 직선적으로 감소되는 경향을 보였다. 종실수량은 휴간거리가 60cm에서 40cm로 좁아짐에 따라서 2차곡선적으로 증가되었으나 휴간거리가 더 좁아질 경우 수량도 감소되었다. 제주지방 선화녹두의 적정휴간거리는 40cm로 판단되었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 하계 학술대회 논문집
• /
• pp.95-102
• /
• 2000

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 하계 학술대회 논문집
• /
• pp.103-110
• /
• 2000

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.589-590
• /
• 2008

Sound absorption characteristics of audience seating is very important when design and simulate room acoustics of concert halls or multi-purpose auditoriums. Sound absorption characteristics of audience seats were measured in reverberation chamber by varying the row to row spacing and number of audiences. By the increment of the row to row spacing, sound absorption characteristics in mid frequency band was increased. Also, sound absorption was proportionated to the number of audience.