• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.6 s.336
• /
• pp.23-32
• /
• 2005

This paper proposes a new algorithm for the energy constraint ad-hoc network which efficiently spread the energy usage over the network through the backup route scheme in order to increase the network lifetime. Recently, the various energy-efficient routing algorithms based on On-demanding method are proposed. Among them, PSR(Power-aware Source Routing) increased the network lifetime through the periodical route alternation depended on the use of the battery while DSR(Dynamice Source Routing) uses only the route selected during the route discovery phase. But PSR has a problem that it increases the route overhead because of the frequent flooding for the route alternation. For solving this problem, we propose HPSR(Hierarchical Power-aware Source Routing) which uses the backup route set during the route discovery in order to alternation the route without the flooding. HPSR increases the network lifetime due to the frequent route alternation using backup route while it decreases the routing overhead due to the reduced flooding. In this paper, we also prove the performance of HPSR through the simulation using OPNET.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.448-449
• /
• 2016

Enlargement and complexification of current structures increase the expected casualty in case of accident in those e.g., fire. In that case, there only have been basic instructions such as announcement of that situation, alarm bell, exit signs, etc. but any guidance to lead to proper escape route was not been provided so far. To tackle the problem, several schemes have been proposed. However, various risk factors were not considered and route discovery performance must be improved to be applied to structures. Therefore, this paper proposes an optimal route discovery system for emergency escape from disaster situations which takes into account various possible risk factors and enhances the searching efficiency by using the $A^{\ast}$ algorithm. Performance evaluation by computer simulation shows that the proposed scheme effectively leads to safe escape route.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.9
• /
• pp.8-15
• /
• 2009

Although traditional single-hop cellular networks had been serving well in past years, they are no longer economically feasible in supporting high data-rate, multimedia services of $4^{th}$Generation (4G) communications due to the requirement of high transmission power By contrast, multi-hop cellular networks (MCN) are capable of dramatically saving the transmission power by overlaying the capability of ad hoc networking among mobile terminals on the cellular network infrastructure. To achieve this performance gain as well as enable 4G services, an efficient routing protocol needs to be designed for MCN. In this paper, we propose a reactive route discovery protocol for MCN that uses directional information to the base station in the route discovery process. Our analysis/simulation results have demonstrated that the proposed protocol significantly reduces flooding overheads. In addition, we consider issues for 4G services in MCN and applications of the proposed protocol.

• Journal of Korea Society of Industrial Information Systems
• /
• v.10 no.3
• /
• pp.30-37
• /
• 2005

Ad hoc network is a collection of mobile nodes without using any infrastructure, it , is using in the various fields. Because ad hoc network is vulnerable to attacks such as routing disruption and resource consumption, it is in need of routing protocol security. In this paper, we propose two secure route-discovery protocols. One is a protocol using hash function. This protocol is weak in active attack but has some merits such as small data of transmission packet and small computation at each hop. The other is a protocol using hash function and public key cryptography. This protocol is strong in active attack.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.12
• /
• pp.5729-5744
• /
• 2017

Vehicular Ad Hoc Networks (VANET) in the large-scale road section usually have typical characteristics of large number of vehicles and unevenly distribution over geographic spaces. These two inherent characteristics lead to the unsatisfactory performance of VANETs. This poor performance is mainly due to fragile communication link and low dissemination efficiency. We propose a novel routing mechanism to address the issue in the paper, which includes a competition-based routing discovery with priority metrics and a local routing repair strategy. In the routing discovery stage, the algorithm uses adaptive scheme to select a stable route by the priorities of routing metrics, which are the length of each hop, as well as the residual lifetime of each link. Comparisons of different ratios over link length and link stability further show outstanding improvements. In the routing repair process, upstream and downstream nodes also compete for the right to establish repair process and to remain as a member of the active route after repair. Our simulation results confirm the improved performance of the proposed algorithm.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.223-228
• /
• 2009

Efficient service discovery mechanism is a crucial feature for a hybrid ad-hoc network supporting extension of a wireless ad-hoc network to the Internet. We propose an efficient cross-layer service discovery mechanism using non-disjoint multi-path source routing protocol for hybrid ad-hoc networks. Our scheme has advantages of multi-path routing protocol and cross-layer service discovery. Intuitively, it is not difficult to imagine that the cross-layer service discovery mechanism could result in a decreased number of messages compared to the traditional approach for handling routing independently from service discovery. By simulation, we show that faster route recovery is possible by maintaining multiple routing paths in each node, and the route maintenance overhead can be reduced by limiting the number of multiple routing paths and by maintaining link/node non-disjoint multi-path.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.131-138
• /
• 2008

Mobile Ad hoc NETworks (MANETs) refer to autonomous networks in which wireless data communications are established between multiple nodes in a given coverage area without a base station or centralized administration. Because of node mobility and limited battery life, the network topology may changes frequently. Selecting the most reliable path during route discovery process is important to improve performance in ad hoc networks. In this paper, an enhanced routing protocol based on AODV(Ad hoc On-demand Distance Vector routing) by monitoring variation of receiving signal strength is proposed. New metric function that consists of node mobility and hops of path is used for routing decision. For preventing route failure by node movement during data transmission, a new route maintenance named as LRC (Local Route Change) is presented. If the node movement is detected, the routing agent switches path to its neighbor node in LRC. Simulation results show that the performance of the proposed routing scheme is superior to previous AODY protocol.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.42-50
• /
• 2008

Unlike a cellular network, a mobile ad hoc network(MANET) is constructed only by mobile nodes without access point. Mobile nodes in MANET operate with scarce resources and restricted battery. If battery of intermediate node is exhausted, overall network might be diverged. Therefore, power-aware is really important. An on-demand multipath routing protocol which is proposed to compensate for shortcoming of on-demand single path routing protocol can reduce mute discovery overhead because route discovery starts only when all routes are disconnected. AOMDV(Ad hoc On-demand Multipath Distance Vector) which is on-demand multipath routing protocol based on AODV, reduces 40% of route discovery frequency. However, AOMDV have none of power-aware. So AOMDV have problem that route discovery for power exhaustion is not reduced at all. This paper proposes new power-aware path selection algorithm for AOMDV and scheme that broadcast REER packets when mobile node's battery can be gone. Performance comparison of proposed algorithm with AOMDV using ns-2 simulator shows that route discovery of proposed algorithm is reduced maximally 36.57% than AOMDV's.

• Journal of applied mathematics & informatics
• /
• v.26 no.1_2
• /
• pp.235-249
• /
• 2008

On-demand routing protocol in ad hoc network is that establishes a route to a destination node only when it is required by a source node. But, it is necessary to reestablish a new route when an active route breaks down. The reconstruction process establishes another route by flooding messages from the source to the destination, cause not only heavy traffic but also long delays in route discovery. A good method for analyzing performance of protocols is important for deriving better systems. In this paper, we suggest the numerical formulas of a representative on-demand routing protocol AODV, ARMP, and RRAODV to estimate the performance of these routing protocols for analyzing the performance of these protocols. The proposed analytical models are very simple and straightforward. The results of analysis show good agreement with the results of computer simulations.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.59-66
• /
• 2001

In this paper, we propose a dynamic source routing protocol supporting asymmetric paths for mobile Ad Hoc networks that contain unidirectional links. At present, the existing dynamic source routing protocol supports only symmetric paths that consist of bidirectional links for routing. However, in fact, there can exist unidirectional links due to asymmetric property of mobile terminals or current wireless environment. Thus, we implement a mobile Ad Hoc routing protocol supporting unidirectional links, which is fit for more general wireless environment. Especially, the proposed protocol uses an improved multipath maintenance method in order to perform rapid route reconfiguration when route error due to mobility is detected. For performance evaluation, we consider the following factors: average route discovery time and average data reception rate. In order to obtain the factors of the performance evaluation, we did simulation for 900 seconds in the step of 100 seconds with the following scenarios: usage of route cache in intermediate nodes on route path, and different mobility/connection patterns.