• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.591-598
• /
• 2020

The all revision of the Road Name Address Act, which contains the contents to be used by expanding the road name address as a means of indicationg the location, has been resloved by the National Assembly. Addresses will be assigned to large-sized facilities (3D mixed-use complex spaces). Here, the 3D (Three-dimensional) address is assigned an indoor path section in the inner passage, dividing the section at intervals. The 3D address will be built on the address information map. For 3D address, data should be built and managed for a 3D complex space(indoor space). Therefore, in this study, the object of the 3D address is defined based on the address conceptual model defined in the international standard, and the 3D address data model is proposed based on IndoorGML. To this, it is proposed as a method of mapping the Core and Navigation module of IndoorGML so that the entity of the 3D address can be expressed in IndoorGML. This study has a limitation in designing a 3D address data model only, but it is meaningful that it suggested a standard for constructing 3D address data in the future.

• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.334-343
• /
• 2023

Purpose: In this study, the cavity data found through ground cavity exploration was combined with underground facilities to derive a correlation, and the ground subsidence prediction map was verified based on the AI algorithm. Method: The study was conducted in three stages. The stage of data investigation and big data collection related to risk assessment. Data pre-processing steps for AI analysis. And it is the step of verifying the ground subsidence risk prediction map using the AI algorithm. Result: By analyzing the ground subsidence risk prediction map prepared, it was possible to confirm the distribution of risk grades in three stages of emergency, priority, and general for Busanjin-gu and Saha-gu. In addition, by arranging the predicted ground subsidence risk ratings for each section of the road route, it was confirmed that 3 out of 61 sections in Busanjin-gu and 7 out of 68 sections in Sahagu included roads with emergency ratings. Conclusion: Based on the verified ground subsidence risk prediction map, it is possible to provide citizens with a safe road environment by setting the exploration section according to the risk level and conducting investigation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.295-306
• /
• 2008

The Intersection is inner traffic facilities and the space where the roads are intersected and connected. And also, the Intersection is the decision-making section for drivers to select the route according to the geometric structure and operation method. However decision-making section cause to raise car accidents rate because it imposes a heavy burden on drivers. In that reason, many countries such as Europe use the Roundabouts to reduce the numbers of decision making and collision. In Korea, the kinds of method are just introduced and it is using now but there are no exact standards. Hence, this study suggests the process to evaluate and determine the types of Intersection which are based on the traffic flow (congestion) and traffic safety (accidents). Firstly, this study presents the number of accident at each Intersection which is depended on the traffic volume. Secondly, this study calculates and analysis the accident at signalized Intersection, non-signalized Intersection and Roundabout by TSIS-NETSIM program. Thirdly, this study concludes the best suitable Intersection type through the materials which are mentioned before.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.5
• /
• pp.3-13
• /
• 2005

The present study examined the 3 dimensional space distribution characteristics of sea water intrusion using data available from previous observations. For this study, we used 3D FEMWATER, which is a 3 dimensional finite element model. The target area was around Daechang-ri, Gimje-si, Jeollabuk-do. The area is relatively easy to formulate a conceptual model and has observation wells in operation for surveying sea water intrusion. Considering the uncertainty of numerical simulation, we analyzed sensitivity to hydraulic conductivity, which has a relatively higher effect. According to the result of the analysis, the variation of TDS concentration had an error range of $-1,336{\~}+107 mg/{\iota}$. Taking note that the survey data from observation wells were collected when the boundary between fresh water and sea water in the aquifer was in equilibrium, we set the range of time for numerical simulation and estimated the spatial distribution of TDS concentration as the range of sea water intrusion. According to the result of estimation, the spatial distribution of TDS concentration calculated when 1,440 days were simulated was taken as the range of sea water intrusion. Using the result of calculation, we can draw not only vertical views for a certain section but also horizontal views of different depth. These views will be greatly helpful in understanding the spatial distribution of the range of sea water intrusion. In addition, the result of this study can be used rationally in proposing an optimal quantity of water pumping through investigating the moving route of sea water intrusion over time in order to prevent excessive water pumping and to maintain an optimal number of water pumping wells per interval.

• Computers and Concrete
• /
• v.17 no.5
• /
• pp.673-692
• /
• 2016

In the standards, minimum reinforcement ratios are presented as the least reinforcement ratios that bearing elements should have in a way to include all systems and in general. However, naturally these general minimum ratios might be presented as being lower than the normally required reinforcement ratios by criteria such as system size, bearing system arrangement, section situation and distributions of the elements and earthquake effect. In this case, minimum reinforcement ratios may remain as meaningless restrictions. Then grouping the criterion that might affect reinforcement ratios according to certain parameters and creating minimum reinforcement ratios regarding preliminary design will provide ease and safety during the project designing. Moreover, it will enable fast and simple examinations in the beginning of project control and evaluation process. By means of the data which could be defined as "preliminary design & minimum reinforcement ratios", a more realistic and safe restriction compared to general minimum reinforcement ratios could be presented. As a result of numerous comprehensive studies, reinforcement ratios to include all certain systems might be obtained. Today, thanks to the development level of finite elements programs which can make reinforced concrete modelling, with the studies that are impossible to carry out beforehand, this deficiency in the minimum reinforcement ratios in the standarts may at least be partially made up with the advisory regulation of preliminary design & minimum reinforcement ratios. As the structure of the system to be examined and the diversity of the parameters range from the specific to the general, preliminary design & minimum reinforcement ratios will approximate to general minimum reinforcement ratios in real terms. By focusing on a more specific system structure and diversity of the parameters, preliminary design and even design reinforcement ratios will be approximated. In this preliminary study, a route between these two extremes was attempted to be followed. Today, it is possible to determine suggested practical ratios for project designs through carrying out numerous studies.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.75-83
• /
• 2003

The navigation area approach to Mokpo port consists of narrow channels with 30mile section, and the route is crossed with many fairways. Specially, except Mokpo-Gu fairway routeing is not assigned and there are many threatening factors against the safe operation of vessel because fishing and mining areas are designated Therefore, this paper proposed a plan for safe passage through a maritime transportation environmental assessment with the analysis of surrounding environment, danger element of navigation, traffic observation and marine accidents.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.4 s.111
• /
• pp.33-44
• /
• 2005

In order to reveal the geographical landscape's features of the East Sea-gateway(東海口), which has existed only in the era of Shilla as unique east path, we have carried out analysis of the old maps(邑誌圖) and satellite imagery, and geographical features analysis in the application of digital maps, and the result is as follows. 1. Analysis of materials from the Chosun dynasty describes landscapes called sea gates(海口) (note that this should not be capitalized); a place where the river meets the sea and the sea comes far into the land. Sea gate landscapes may have an island, but this is not a prerequisite. 2. According to the satellite imagery, the capital city of Shilla Dynasty had five passages. four or them are broad corridors, but one of them is narrow. The east side of the capital city is blocked by mountains and there was an important path which leads into the East Sea. 3. According to the cross section of the mountains, there is the only rule East-path. There was no alternative way. There was only one way-out to the east side from the capital city. This is the unique path which reaches a length of 28km. Judging from this, it seems that this path was called the East Sea-gateway. 4. The landscape of the East Sea-gateway was shaped like the letter 'V' and reached to the landscape of the sea gate. However, the route was blocked - part by the mountains, and also the part in the crisis of loss of path-landscape which has lost its own character of closure as several valleys are merged together.

• Journal of Environmental Science International
• /
• v.26 no.2
• /
• pp.211-220
• /
• 2017

For areas with the diverse contamination sources, the change of 4-nitrophenol contamination and impact of potential contamination sources have been evaluated using monitoring data and a numerical model (HydroGeoSphere). The model considered several parameters including land cover, precipitation, and flow rate. And, the model has been performed to investigate the effect of decay rate of 4-nitrophenol. The results of the simulations showed that the influence on 4-nitrophenol in downstream was mainly greater than that in upstream, and the tributaries did not significantly affect the mainstream because of their low flow rates. In addition, the effect of contamination sources was simulated for each section, then the measured data were higher than the corresponding simulated data in most sections of the Geumho river. In particular, the impact of the potential contamination sources in the upstream area was much higher than that in the other area, thus more monitoring data for the upstream area is required.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.187-196
• /
• 2014

In this paper, Minimize driving energy for operation within a defined distance yeokgan fixed time-resolved and determine the nature of the train is traveling, and to model mathematically. Urban rail car cruise in general by the PID controller is used instead of automatically tracking a target value while traveling in energy consumption to be minimized by using optimal control model railroad charyangreul was designed under real operating conditions the same. The actual track conditions apply to the minimum value or a separate listing of cars around the track facility without a driving energy of the automatic operation and to reduce the driving energy. Therefore, actual route chosen straight line 8 / gradient segment / curve for the measured data analysis, such as sections within the city-minute drive each section and presented how the trains to save energy, depending on the pattern of the train station in the region.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1097-1106
• /
• 2007

Rail provides running tract for train and broadly and widely conveys the weight of the train exerted from the train wheels that the rail directly supports onto the cross tie and roadbed, and supports the cross-sectional pressure exerted by centrifugal force at curvatures. That is, stationary rail provides surface on which dynamic train runs and guarantees cross-sectional resistance to enable the vertical snake motion of the train wheels as well as to maintain lateral force at curvatures. Rail provides running surface on which train wheels can run smoothly, and secures vertical and lateral force. However, it undergoes continuous destructive reactions (wearing and damages) and abrasion of the cladding by the train wheels. It is obvious that wearing will result when two metal parts act against each other. However, occurrence of abnormal wearing such as rapid wearing of the rail side due to complex generation of various mechanisms at the contact surface between the rail and train wheel flange. It is not easy to simply examine the causes of occurrence of abnormal wearing of rail and train wheel flange. Although countless number of academicians and specialists are conducting researches on abnormal wearing of rail and vertical wearing of train wheels, I believe it is too early to argue on pros and cons due to insufficiency of officially verified information on the issue. This review will be focusing on the examples of repairs that reduced the generation of abnormal wearing of rail by reviewing and improving characteristics of wearing and slack, speed of the train and cant as well as status of lubricator by choosing the compound curves present in the section between the $Anguk{\sim}Jongno3-ga$ Stations of the Route No. 3 among the compound curve tracks of the Seoul Metro Routes No. 3 & 4 at which abnormal wearing is generated continuously.