• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.593-596
• /
• 2018

The speed of vehicles has remained a significant factor that influences the severity of accidents and traffic accident rate in many parts of the world including South Korea. This behavior where drivers drive at speeds which exceed a posted safe threshold is known as 'speeding'. Over the past twenty years, the Korean National Police Agency (NPA) has become aware of an increased frequency of drivers who are speeding. Therefore, fixed-type ASE systems [1] have been installed on hazardous road sections of many highways. These system monitor vehicle speeds using a camera. However, the use of ASE systems has changed the behavior of the drivers. Specifically, drivers reduce speed or avoid the route where the cameras are mounted. It is not practical to install cameras at every possible location. Therefore, it is challenging to thoroughly explore the location where speeding occurs. In view of these problems, the author of this paper designed and implemented a prototype visualization system in which point and color are used to show vehicle location and associated over-speed information. All of this information was used to create a comprehensive visualization application to show information about vehicle driving. In this paper, we present an approach detecting vehicles moving at speeds which exceed a threshold and visualizing the points those violations occur on a map. This was done using vehicle trajectory data collected in Daegu city. We propose steps for exploring the data collected from those sensors. The resulting mapping has two layers. The first layer contains the dynamic vehicle trajectory data. The second underlying layer contains the static road networks. This allows comparing the speed of vehicles on roads with the known maximum safe speed of those roads, and presents the results with a visualization tool. We also compared data about people who drive over threshold safe speeds on each road on days and weekends based on vehicle trajectories. Finally, our study suggests improved times and locations where law enforcement should use monitoring with speed cameras, and where they should be stricter with traffic law enforcement. We learned that people will drive over the speed limit at midnight more than 1.9 times as often when compared with rush hour traffic at 8 o'clock in the morning, and 4.5 times as often when compared with traffic at 7 o'clock in the evening. Our study can benefit the government by helping them select better locations for installation of speed cameras. This would ultimately reduce police labor in traffic speed enforcement, and also has the potential to improve traffic safety in Daegu city.

• The Journal of Korean Society for School & Community Health Education
• /
• v.20 no.2
• /
• pp.69-80
• /
• 2019

Objectives: In this study, we tried to analyze the factors affecting Length Of Stay for serious patients in Republic of Korea. Methods: The study included 139,172 serious patients in the 2012-2016 discharge details. Using the SPSS 23.0 program, we conducted a rank regression analysis with social and social demographic characteristics as control variables, medical institution characteristics and medical use characteristics as independent variables, and Average Length Of Stay as a dependent variable. Results: Average Length Of Stay for participants was found to be 9.92days. And the location and bed size of medical institutions were not statistically significant, the hospitalization path was more urgent(B=0.43) than the outpatient (p<0.001), and there was no secondary diagnosis(B=0.35). However, Average Length Of Stay was higher (p<0.001) than there was no main surgery(B=0.80). After discharge, Average Length Of Stay for funding(B=0.43) and death(B=0.72) was long (p<0.001). Average Length Of Stay for participants was found to be 9.92days. And the location and the bed size of the medical institution were not statistically significant, and the hospitalization pass had longer Length Of Stay for emergency patients(B=0.43) than for outpatients(p<0.001). There was a longer Length Of Stay(B=0.35) than none was diagnosed. There were longer Length Of Stay(p<0.001) than there was no major surgery(B=0.80). After discharge, the outpatients had longer Average Length Of Stay(B=0.43) and deaths(B=0.72) than those who returned home(p<0.001). Conclusion: As a result of analyzing the factors affecting Average Length Of Stay of the participants, it was confirmed that regardless of the location and bed size of medical institutions, hospitalization route, department diagnosis, main surgery, and whereabouts after discharge. Therefore, appropriate interventions and necessary support must be provided so that efficient Length Of Stay can be managed according to the medical use characteristics of serious patient.

• Journal of Industrial Convergence
• /
• v.21 no.4
• /
• pp.165-170
• /
• 2023

There are cases where the mobility impaired have difficulty moving from the moment they leave the house. If guardians also do not have time to entrust their families, who are socially disadvantaged, to a shelter, the guardian has no choice but to check directly in order to know the location of the guardian. The AI home care solution was designed to relieve the anxiety and labor of caregivers and to provide convenience for protection facility officials and users. If more facilities distribute and use services free of charge to non-profit foundations and protective facilities, the concern of guardians will be reduced, and the burden of facility officials who have to manage facility users will be reduced. In this paper, we provide emergency notification services to guardians in the event of an emergency as well as location and status alarms for guardians, which are all data related to movement, in consideration of the mobility vulnerable. Furthermore, it is necessary to provide a service function that recommends the optimal route using a navigation function to ease the convenience and burden of facility officials. It is necessary to alleviate anxiety by providing necessary information to the guardian, such as the location of the shuttle used by the mobile weak and the time of getting on and off. In addition, while providing services for free, the goal is to improve the quality of service for facility managers and the quality of service for the mobility weak.

• Journal of Korean Society of Transportation
• /
• v.29 no.5
• /
• pp.121-138
• /
• 2011

More affordable and available cutting-edge technologies (e.g., wireless vehicle communication) are regarded as a possible alternative to the fixed infrastructure-based traffic information system requiring the expensive infrastructure investments and mostly implemented in the uninterrupted freeway network with limited spatial system expansion. This paper develops an advanced decentralized traveler information System (ATIS) using vehicle-to-vehicle (V2V) communication system whose performance (drivers' travel time savings) are enhanced by three complementary functions (autonomous automatic incident detection algorithm, reliable sample size function, and driver behavior model) and evaluates it in the typical $6{\times}6$ urban grid network with non-recurrent traffic state (traffic incident) with the varying key parameters (traffic flow, communication radio range, and penetration ratio), employing the off-the-shelf microscopic simulation model (VISSIM) under the ideal vehicle communication environment. Simulation outputs indicate that as the three key parameters are increased more participating vehicles are involved for traffic data propagation in the less communication groups at the faster data dissemination speed. Also, participating vehicles saved their travel time by dynamically updating the up-to-date traffic states and searching for the new route. Focusing on the travel time difference of (instant) re-routing vehicles, lower traffic flow cases saved more time than higher traffic flow ones. This is because a relatively small number of vehicles in 300vph case re-route during the most system-efficient time period (the early time of the traffic incident) but more vehicles in 514vph case re-route during less system-efficient time period, even after the incident is resolved. Also, normally re-routings on the network-entering links saved more travel time than any other places inside the network except the case where the direct effect of traffic incident triggers vehicle re-routings during the effective incident time period and the location and direction of the incident link determines the spatial distribution of re-routing vehicles.

• Journal of KIISE:Databases
• /
• v.30 no.3
• /
• pp.296-309
• /
• 2003

One of commercial applications of mobile computing is ATIS(Advanced Traveler Information Systems) in ITS(Intelligent Transport Systems). In ATIS, a primary mobile computing task is to compute the shortest path from the current location to the destination. In this paper, we have studied the shortest path re-computation problem that arises in the DRGS(Dynamic Route Guidance System) in ATIS where the cost of topological digital road map is frequently updated as traffic condition changes dynamically. Previously suggested methods either re-compute the shortest path from scratch or re-compute the shortest path just between the two end nodes of the edge where the cost change occurs. However, these methods we trivial in that they do not intelligently utilize the previously computed shortest path information. In this paper, we propose an efficient approximate shortest path re-computation method based on the dynamic window scheme. The proposed method re-computes an approximate shortest path very quickly by utilizing the previously computed shortest path information. We first show the theoretical analysis of our methods and then present an in-depth experimental performance analysis by implementing it on grid graphs as well as a real digital road map.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.336-339
• /
• 2011

In the RTLS(Real Time Location Based System), in case of existing a number of moving target, extremely complecated data flow is can be occurred. In the network where single gateway exists, various data which was collected from sensor node is transmitted along the simple route as time goes by. In case of multi-gateway configuration, the collected data is transmitted through diverse routes rather than simple route. This kind of data causes jams on nodes and this brings down the performance of the network. Different from existing studies, in this thesis, MAC (Media Access Control) protocol which minimizes data collision between nodes and guarantees QoS(Quality of Service) is suggested, in order to communicate efficiently in multi-gateway underwater sensor network environment. In the suggested protocol, source node which wants to transmit data makes a channel reservation to a number of destination node using a RTS packet. Source node reserves a channel without collision, by scheduling CTS response time using expected delay information from neighbor nodes. Once the reservation is made, source node transmit data packet without collision. This protocol analyzes/estimates the performance compared to a method provided from existing studies via simulation. As a results of the analysis, it was comfirmed that the suggested method has better performance, such as efficiency and delay.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.2
• /
• pp.53-63
• /
• 2020

In this study, the two-dimensional flow analysis model Hydro_AS-2D model was used to simulate the situation of flooding in Seongsangu and Uichang-gu in Changwon in the event of rising sea levels and extreme flooding, and the results were expressed on three-dimensional topography and the optimal evacuation path was derived using BIM technology. Climate change significantly affects two factors in terms of flood damage: rising sea levels and increasing extreme rainfall ideas. The rise in sea level itself can not only have the effect of flooding coastal areas and causing flooding, but it also raises the base flood level of the stream, causing the rise of the flood level throughout the stream. In this study, the rise of sea level by climate change, the rise of sea level by storm tidal wave by typhoon, and the extreme rainfall by typhoon were set as simulated conditions. The three-dimensional spatial information of the entire basin was constructed using the information of topographical space in Changwon and the information of the river crossing in the basic plan for river refurbishment. Using BIM technology, the target area was constructed as a three-dimensional urban information model that had information such as the building's height and location of the shelter on top of the three-dimensional topographical information, and the results of the numerical model were expressed on this model and used for analysis for evacuation planning. In the event of flooding, the escape route is determined by an algorithm that sets the path to the shelter according to changes in the inundation range over time, and the set path is expressed on intuitive three-dimensional spatial information and provided to the user.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.31-40
• /
• 2009

Some road charges toll to finance the cost or to manage traffic congestion. With a growth of PPI projects, toll roads would be increase continuously. Tolls have a considerable influence on user's route choice, and sometimes can affect to the departure time and even to mode choice. For modelling toll roads, user's WTP or VOT has an important role and it is general that VOT is equivalent to the wages of workers. The current way of modelling technique yields various toll price elasticity from low to high. When there exist few alternative routes, unrealistic result that all traffic assigned to some shortest path may occur. The toll price elasticity can be influenced by alternative route and congestion level, but some result shows nearly unrealistic patterns. The model to forecast more realistic toll road demand is very essential for estimating toll revenue, choice of optimal toll level & collecting location and establishing toll charge strategy. This paper reviewed some literatures about toll road modelling and tested case study about the assignment technique with different VOT. The case study shows that using different VOT yields more realistic result than the use of single VOT.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.1
• /
• pp.41-46
• /
• 2014

Bus service is easily adjusted to accommodate the changed demand. Despite the flexibility of that, its relocation should overcome the following problems: first, Bus line rearrangement should consider the balance between the demand and the supply to enhance the transit equity among the users scattered around the area that supply against demand imbalances. Second, the existing demand analysed is to crude since the demand was analysed based on TAZ. mainly based on the Dong unit. Utilization of the GWR and GIS-T data can resolve the problem. In this paper, the limitation of the conventional transit demand analysis model is overcome by deploying the GWR model which identifies the transit demand based on the geographic relation between the service location and those of the users. GWR model considers the spatial effect of the bus demand in accordance with the distance to the each bus stops using SCD(Smart Card Data) and BIS(Bus Information System). This demand map was then superimposes with the existing bus route which identified the areas where the balance between demand and supply is severly skewed. since the analysis was computed with SCD and BIS at every bus stops. the shortage and surplus of bus service of entire study area could computed. Further. based on this computational result and considering the entire bus service capacity data. Bus routes optimization from the oversupplied areas to the undersupplied area was illustrated thus this study clearly compared the benefits the GIS.

• The Journal of Bigdata
• /
• v.5 no.1
• /
• pp.155-180
• /
• 2020

It takes the most important role the problem of assigining vehicles and desigining optimal routes for each vehicle in order to enhance the logistics service level. While solving the problem, various cost factors such as number of vehicles, the capacity of vehicles, total travelling distance, should be considered at the same time. Although most of logistics service providers introduced the Transportation Management System (TMS), the system has the limitation which can not consider the practical constraints. In order to make the solution of TMS applicable, it is required experts revised the solution of TMS based on their own experience and intuition. In this research, different from previous research which have focused on minimizing the total cost, it has been proposed the methodology which can enhance the efficiency and fairness of asset utilization, simultaneously. First of all, it has been adopted the Cluster-First Route-Second (CFRS) approach. Based on the location of customers, we have grouped customers as clusters by using four different clustering algorithm such as K-Means, K-Medoids, DBSCAN, Model-based clustering and a procedural approach, Fisher & Jaikumar algorithm. After getting the result of clustering, it has been developed the optiamal vehicle routes within clusters. Based on the result of numerical experiments, it can be said that the propsed approach based on CFRS may guarantee the better performance in terms of total travelling time and distance. At the same time, the variance of travelling distance and number of visiting customers among vehicles, it can be concluded that the proposed approach can guarantee the better performance of assigning tasks in terms of fairness.