• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.310-323
• /
• 2004

In this paper, we extend the multiple time scale control framework to window-based congestion control, in particular, TCP This is performed by interfacing TCP with a large tine scale control nodule which adjusts the aggressiveness of bandwidth consumption behavior exhibited by TCP as a function of "large time scale" network state. i.e., conformation that exceeds the horizon of the feedback loop as determined by RTT Our contribution is threefold. First, we define a modular extension of TCP-a function call with a simple interface-that applies to various flavors of TCP-e.g., Tahoe, Reno, Vegas and show that it significantly improves performance. Second, we show that multiple time scale TCP endows the underlying feedback control with preactivity by bridging the uncertainty gap associated with reactive controls which is exacerbated by the high delay-bandwidth product in broadband wide area networks. Third, we investigate the influence of three traffic control dimensions-tracking ability, connection duration, and fairness-on performance. Performance evaluation of multiple time scale TCP is facilitated by a simulation bench-mark environment which is based on physical modeling of self-similar traffic.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.7
• /
• pp.570-577
• /
• 2016

This paper proposes the design of a novel distributed message management scheme using a message-oriented management and analysis tool (MOMAT) for naval combat system (NCS) middle-ware. If a message is not guaranteed real-time of the NCS with each node, it causes the loss of data and decreases the reliability of systems. To solve these problems, improved message management schemes are proposed. Message management schemes are considering a real-time user management scheme and a real-time traffic management scheme. The proposed schemes are simulated with a developed simulation tool, data publisher, and subscriber connected through nodes in middle-ware. The simulation results show improved results in terms of message round-trip time (RTT), End-to-End delay, and throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2B
• /
• pp.44-52
• /
• 2005

This paper proposes a neural network prediction model to improve the valid packet transmission rate for the QoS(Quality of Service) of multimedia transmission. The Round Trip Time(RTT) and Packet Loss Rate(PLR) are predicted using a neural network and then the transmission rate is decided based on the predicted RTT and the PLR. The suggested method will improve the transmission rate since it uses the rate control factors corresponding to time of data is being transmitted, while the conventional one uses the transmission rate determined based on the past informations. An experimental set-up has been established using a Linux PC system, and the multimedia data are transmitted using UDP protocol in real time. The valid transmitted packets are about 5% higher than the one in the conventional TCP-Friendly congestion control method when the suggested algorithm was applied.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.513-522
• /
• 2002

Current end-to-end congestion control depends only on the information of end points (using three duplicate ACK packets) and generally responds slowly to the network congestion. This mechanism can't avoid TCP global synchronization which TCP congestion window size is fluctuated during congestion occurred and if RTT (Round Trip Time) is increased, three duplicate ACK packets is not a correct congestion signal because congestion maybe already disappeared and the host may send more packets until receive the three duplicate ACK packets. Recently there is increasing interest in solving end-to-end congestion control using active network frameworks to improve the performance of TCP protocols. ACC (Active congestion control) is a variation of TCP-based congestion control with queue management In addition traffic modifications nay begin at the congested router (active router) so that ACC will respond more quickly to congestion than TCP variants. The advantage of this method is that the host uses the information provided by the active routers as well as the end points in order to relieve congestion and improve throughput. In this paper, we model enhanced ACC, provide its algorithm which control the congestion by using information in core networks and communications between active routers, and finally demonstrate enhanced performance by simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1250-1260
• /
• 2014

In this paper, a novel resource scheduling, which is used for hub network based long distance airborne tactical communication, is proposed. Recently, some countries of the world has concentrated on developing data rate and networking performance of CDL, striving to keep pace with modern warfare, which is changed into NCW. And our government has also developed the next generation high capacity CDL. In hub network, a typical communication structure of CDL, hybrid FDMA/TDMA can be considered to exchange high rate data among multiple UAVs simultaneously, within limited bandwidth. However, due to different RTT and traffic size of UAV, idle time resource and unnecessary packet transmission delay can occur. And these losses can reduce entire efficiency of hub network in long distance communication. Therefore, in this paper, we propose RTT and data traffic size based UAV scheduling, which selects time/frequency resource of UAVs by using iterative sorting algorithm. The simulation results verified that the proposed scheme improves data rate and packet delay performance in low complexity.

• Journal of Korea Multimedia Society
• /
• v.19 no.12
• /
• pp.2014-2023
• /
• 2016

Web presence is one of the key issues for extensive deployment of Internet-of-Things (IoT). An obstacle to overcome for Web presence is relatively low computing power of IoT devices. In this paper, we present implementation of an IoT platform based on Constrained Application Protocol (CoAP) which is a web transfer protocol proposed by Internet Engineering Task Force (IETF) for the low performance IoT devices such as Wireless Sensor Network (WSN) nodes and micro-controllers. To qualify the performance of CoAP-based IoT system for such an application as smart grid, we designed a test platform consisting of Raspberry Pi2, Kmote WSN node and a desktop PC. Using open source softwares, CoAP was implemented on top of the platform. Leveraging the GET command defined at CoAP specification, performance of the system was measured in terms of round-trip time (RTT) from web application to the Kmote sensor node. To investigate abnormal cases among the test results, hop-by-hop delays were measured to analyze resulting data. The average response time of CoAP-based communication except the abnormal data was reduced by 23% smaller than the previous research result.

• Journal of Korea Society of Industrial Information Systems
• /
• v.10 no.3
• /
• pp.48-56
• /
• 2005

This paper proposes a dynamic end-to-end flow control algorithm that is more effective than previous methods considering either the Rate of Packet Loss (RPL) or Round Trip Time (RTT). When the RPL is under normal conditions, the current network status will be in one of three defined states by using the RTT and this makes bandwidth control precise before serious packet loss occurs. If the RPL exceeds a critical level, then the network is considered to be in a fourth state. Suitable transmission rates are determined depending on the network status and are controlled by adjusting not only the number of transmitted frames but also the quality of the frames. In this paper, we present some experimental results of the proposed algorithm. According to our quantitative analysis, the proposed method performs 1.6 to 6 times better than the previous method in terms of the RPL. At the same time, the total number of transmitted packets is increased, which indicates that the proposed method can provide greater bandwidth capacity than previous methods.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.4015-4033
• /
• 2015

The future mobile networks consist of hyper-dense heterogeneous and small cell networks of same or different radio access technologies (RAT). Integrating mobile networks of different RATs to provide seamless and smooth mobility service will be the target of future mobile converged network. Generally, handover from high-speed networks to low-speed networks faces many challenges from application perspective, such as abrupt bandwidth variation, packet loss, round trip time variation, connection disruption, and transmission blackout. Existing inter-RAT handover solutions cannot solve all the problems at the same time. Based on the high-layer convergence sublayer design, a new receiver-aided soft inter-RAT handover is proposed. This soft handover scheme takes advantage of multihoming ability of multi-mode mobile station (MS) to smooth handover procedure. In addition, handover procedure is seamless and applicable to frequent handover scenarios. The simulation results conducted in UMTS-WiMAX converged network scenario show that: in case of TCP traffics for handover from WiMAX to UMTS, not only handover latency and packet loss are eliminated completely, but also abrupt bandwidth/wireless RTT variation is smoothed. These delightful features make this soft handover scheme be a reasonable candidate of mobility management for future mobile converged networks.

• ETRI Journal
• /
• v.44 no.6
• /
• pp.1020-1033
• /
• 2022

In this paper, we propose novel disaggregated memory module (dMM) architecture and memory access control schemes to solve the collision and contention problems of memory disaggregation, reducing the average memory access time to less than 1 ㎲. In the schemes, the distributed scheduler in each dMM determines the order of memory read/write access based on delay-sensitive priority requests in the disaggregated memory access frame (dMAF). We used the memory-intensive first (MIF) algorithm and priority-based MIF (p-MIF) algorithm that prioritize delay-sensitive and/or memory-intensive (MI) traffic over CPU-intensive (CI) traffic. We evaluated the performance of the proposed schemes through simulation using OPNET and hardware implementation. Our results showed that when the offered load was below 0.7 and the payload of dMAF was 256 bytes, the average round trip time (RTT) was the lowest, ~0.676 ㎲. The dMM scheduling algorithms, MIF and p-MIF, achieved delay less than 1 ㎲ for all MI traffic with less than 10% of transmission overhead.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.10-17
• /
• 2015

A satellite communication system is one of viable solutions for Internet applications running in wide areas. However, the performance of TCP can be seriously degraded in the satellite networks due to long round-trip time (RTT) and high bit error rate (BER) over satellite links. Therefore, a performance enhancing proxy(PEP) based TCP splitting connection scheme is used in the satellite link to improve the TCP performance. In this paper, we implement PEP testbed and conduct experiment to evaluate the performance of TCP splitting connection by comparing with high-speed TCP solutions in various environments. In our experimental environment, we consider multiple connections, high packet loss, and limited bandwidth. The experiment results show that PEP improves the TCP throughput than high-speed TCP variants in various environments. However, there is no improvement of the TCP throughput with the limited bandwidth because there is packet loss caused by both the congestion and the channel error.