• Convergence Security Journal
• /
• v.17 no.2
• /
• pp.15-22
• /
• 2017

This paper presents new 8-bit implementation of AES. Most typical 8-bit AES designs are to reduce the circuit area by sacrificing its throughput. The presented AES architecture employs two separated S-box to perform round operation and key generation in parallel. From the simulation results of the proposed AES-128, the maximum critical path delay is 13.0ns. It can be operated in 77MHz and the throughput is 15.2 Mbps. Consequently, the throughput of the proposed AES has 1.54 times higher throughput than the other counterpart although the area increasement is limited in 1.17 times. The proposed AES design enables very low-area design without sacrificing its performance. Thereby, it can be suitable for the various IoT applications that need high speed communication.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2433-2438
• /
• 2011

Bus system consists of several masters, slaves, arbiter and decoder in a bus. Master means the processor that performs data command like CPU, DMA, DSP and slave means the memory that responds the data command like SRAM, SDRAM and register. Furthermore, as multiple masters can't use a bus concurrently, arbiter plays an role in bus arbitration. In compliance with the selection of arbitration method, bus system performance can be changed definitely. Fixed priority and round-robin are used in general arbitration method and TDMA and Lottery bus methods are proposed currently as the improved arbitration schemes. In this study, we proposed the score arbitration method and synthesized it using Hynix 0.18um technology, after design of RTL. Also we analyze the performance compared with general arbitration methods through simulation.

• The Korean Journal of Cytopathology
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2003

Parathyroid carcinoma is a rare disorder accounting for 0.5% to 5% of parathyroid neoplasia. Diagnosis of parathyroid carcinoma in fine needle aspiration cytology (FNAC) is difficult because ail characteristic features of parathyroid carcinoma can be recognized in parathyroid adenoma or hyperplasia. Cellular atypism cannot be used for the diagnostic criteria of parathyroid carcinoma as malignancies of most other organs. We experienced two cases of cytologic features of parathyroid carcinoma confirmed by histologic examination. The majority of tumor cells formed large cohesive clusters, although individual tumor cells were also present. The tumor cells displayed rather pleomorphic round to oval nuclei, occasional prominent nucleoli, and distinct cytoplasmic margin. Occasionally karyolysis, anuclear cells, and nonepithelial cell clusters were noted. The histologic findings showed a partially lobulated architecture, with admixture of sheets of chief cells, oxyphil cells, and occasional water clear cells. The tumor infiltrated into the thyroid parenchyme and perithyroidal soft tissue. The electron microscopic study of case 1 disclosed typical findings of parathyroid neoplasm; clusters of secretory chief cells with centrally located round to ovoid nuclei, moderately clumped heterochromatins and one or two nucleoli. The tumor cells showed conspicous interdigitation of contiguous ceil membrane and intercellular microvilli.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.6 s.336
• /
• pp.41-52
• /
• 2005

In wireless networks there are various errors, caused by multi-path fading and interference between devices which lower the network Performance. Especially, performance of IEEE 802.IS.3 High-Rate WPAN (Wireless Personal Area Network) which is operated in ISM unlicensed frequency band is easily affected by channel errors. In this paper, we propose a scheduling algorithm which takes channel errors into consideration in scheduling asynchronous data traffic. The proposed scheduling algorithm can allocate CTA(Channel Time Allocation) proportionally in accordance with the requested channel time of each device. It also prevents waste of channel time by allocating CTA of the channel-error devices to other channel-error free devices. After recovering from the channel error, the devices are compensated as much as they conceded during channel error status. Simulation results show that the proposed scheduling algorithm is superior to the existing SRPT(Shortest Remain Processing Time) and RR(Round Robin) in throughput and fairness aspects.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.9
• /
• pp.50-57
• /
• 2011

Conventional bus system architectures are composed of several components such as master, arbiter, decoder and slave modules. The arbiter plays a role in bus arbitration according to the selected arbitration method, since several masters cannot use the bus concurrently. Typical priority strategies used in high performance arbiters include static priority, round robin, TDMA and lottery. Typical arbitration algorithms always consider the bus priority primarily, while the bus utilization is always ignored. In this paper, we propose an arbitration method using bus utilization for the operating block of each master. We verify the performance compared with the other arbitration methods through the TLM(Transaction Level Model). Based on the performance verification, the conventional fixed priority and round-robin arbitration methods cannot set the bus utilization. Whereas, in the case of the conventional TDMA and lottery arbitration methods, more than 100,000 cycles of bus utilization can be set by the user, exhibiting differences of actual bus utilization up to 50% and 70%, respectively. On the other hand, we confirm that for the proposed arbitration method, the matched bus utilization set by the user was above 99% using approximately 1,000 cycles.

• Applied Chemistry for Engineering
• /
• v.23 no.4
• /
• pp.409-415
• /
• 2012

To recycle the steel slag as manufactured composite materials of polymer concretes, we used the atomizing method to make round aggregates from steel slag, which is treated as industrial wastes. A round rapid-cooled steel slag was used to replace fine aggregate (river sand) or coarse aggregate (crushed aggregate), depending on the grain size. To examine general physical properties of polymer concrete composites manufactured from rapid-cooled steel slag, the polymer concrete specimen with various proportions depending on the addition ratio of polymer binder and replacement ratio of rapid-cooled steel slag were manufactured. In the result of the tests, the mechanical strength of the specimen made by replacing the optimum amount of rapid-cooled steel slag increased notably (maximum compressive strength 117.1 MPa), and the use of polymer binder, which had the most impact on the production cost of polymer concrete composites, could be remarkably reduced. However, the mechanical strength of the specimen was markedly reduced in hot water resistance test of polymer concrete composite.

• Journal of Digital Convergence
• /
• v.14 no.2
• /
• pp.369-376
• /
• 2016

This paper will discuss the process behind creating casual games utilizing Spritekits. Casual games, which recently have been on this rise due to the increasing use of personal adhered media and SNS, are significant in that they are leading the way to various changes in the gaming industry whilst making it popular. With this background in mind, and through research on Casual Games, we have divided the production process of Casual Games into three parts and created the game "Round and Round" which utilizes Spritekits. We have sectioned and organized the production process of Casual Games into four parts as followed: information architecture, design, program development, and debugging. This research will propose an easier methodology to approaching the production of casual games and be a guideline for creating games with the minimal amount of personnel.

• Animal cells and systems
• /
• v.12 no.4
• /
• pp.297-304
• /
• 2008

Morphology and distribution of the minute tubercles projected on the skin surface of larvae with its development were observed in the Korean bitterling, Acheilognathus somjinensis. The minute tubercles appeared to be two distinct morphologies, hemispheric or scaly and vestigial structures. Just after hatching, the epidermis of the larvae consists of a thin single cell layer having smaller basophilic flat or round-flattened basal cells. As the larvae grow, the epidermis contains more small flat cells and large epidermal cells which are round and hemispheric, or scaleshaped, called minute tubercles. They are distributed over the anterior part and most part of yolk sac, posterior region of yolk sac and the body region. Vestigial epidermal cells, another minute tubercle, occur only in the caudal fin-fold region, which they are shrunken and flattened, causing the cell boundary to be unclear. They increase in number and height from just to 5 days after hatching, but they become reduced as the larvae develop gradually. The required time for those disappearance was different each by regional body: at day 20 after hatching in the anteriormost part of yolk sac, and day 11 after hatching in the posterior part of yolk sac and the body, and day 21 after hatching in two regions such most part of the yolk sac and the caudal finfold regions.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.2 no.1
• /
• pp.9-14
• /
• 1965

Ship designers make every efforts to get faster ships in accordance with the development of the Naval Architecture. But for the speed lying over factor length ratio 2.5-3.0, we could put a powerful engine into the conventional round bottom displacement type vessels, but it is very difficult in view point of economy, weight and volume. The principal cause of these speed obstacles is the wave making resistance and researchers are trying to decrease this resistance. One of the resolving ways, planing hulls were applied to small high boats. Planing hull's advantage is not restricted to speed, but the workmanship of the planing hull is easier than those of displacement type vessels of round bottom. Planing hull, therefore, are widely applicable to the intermediate speed boats, which don't have enough high speed to take planing advantage, as well as high speed boats. We will discuss related phenomena of the planing hull in details and this paper we particularly interested in the interjection point(speed length ratio 3.0-3.5 by Mr. D. De Groots) between semi-planing and full planing hulls on the resistance characteristic curve. The paper by Prof. Keuck Chun Kim, "Some Characteristics of Straight Framed V-bottom Hull Forms", Journal of the society of Naval Architects of Korea, Vol.1, No.1, Dec.5, 1964, is referred to the V-bottom hull forms belonging to low speed region and determines practical applicable limit of the speed length ratio combined with construction costs, under which are still used by large commercial vessels. This is the interesting contrast between his and authors. We will further discuss the speed length ratio which is considered as a beginning point to planing effect. For this analysis, we choose 3 model ships: Model (1) and (2) have the same principal dimensions, model 3 varied dimension. Model (1) is full-planing hull, (2) is semi-planing hull and (3) is complete planing hull. They are aimed to collect proper design data for purposed ships.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.1
• /
• pp.28-34
• /
• 2023

In the anchovy boat seine fishing boat, it is necessary to select other aquatic organisms other than live anchovies, which are the target species of catch. By making a rotating roller sorter using hydraulic pressure, the anchovy sorting amount was compared and the sorting accuracy of the rotary roller sorter, and the discharge speed of butter fish and jerry fish according to the number of roller revolutions were analyzed. The rotating roller sorter increases the weight of the sorted raw anchovy by 54%, 74% and 91.5% compared to the round bar fixed type, so it can reduce the required time by an average of 73.2%. As a result of converting the sorting accuracy to the weight of pure anchovies excluding the catch weight, the round bar fixed type was 89%; however, the average of the rotating roller sorter was 97.7%. Thus, the sorting accuracy of the rotary roller sorter was further improved by about 8.7%. The roller speed moved 7% at 300 rpm, 7.5% at 600 rpm, and 16% at 900 rpm, so butter fish were discharged overboard 10% faster than jelly fish on average. In addition, the average feed speed of butter fish and jelly fish is 1,400 mm/s when the roller rotation speed is 300 rpm, 1,480 mm/s at 600 rpm, and 1,850 mm/s at 900 rpm. A Φ58 mm roller rotates once it moved about 1.23 mm. In the future, a follow-up study of quantitative evaluation is needed targeting more non-target fish species of anchovy boat seine.