• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.337-343
• /
• 2012

NREL(National Renewable Energy Laboratory) Baseline controller conduct using method proposed RISO National Laboratory in Region 3. which designed the blade-pitch control system using a single degree-of-freedom model of the wind turbine. Idealized PID-Controlled rotor-speed error will respond as a second-order system with the natural frequency and damping ratio. RISO proposed specific natural frequency(=0.6 rad/s) and damping ratio(=0.7). If specific Eigen value apply to NREL 5 MW wind turbine, differ with pitch respond for simulation results of RISO report. Variation of specific eigen value investigate performance of NREL 5 MW wind turbine.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.3
• /
• pp.60-67
• /
• 2014

Technical history of VTOL aircraft is examined from the early helicopter appearance to recent experimental rotorcraft in order to distinguish the core issues of those aircraft. Performance and technological challenges of some VTOL aircraft such as tilt rotor, convertiplane, gyroplane, and coaxial helicopter are discussed. As a new generation high performance rotorcraft, Sikorsky X2 is intensively investigated. Considering the developmental history of X2, the autorotational ability at high speed is recognized as a core technology. Analytic method of autorotation and some results are shown and presents research subjects related to the future Korean high performance rotorcraft.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.1
• /
• pp.35-39
• /
• 2013

The superconducting Homopolar motor is manufactured and tested. Homopolar motor system is simple and solid as the field coil of the motor is fixed near the stator coil without rotating system. In this paper, a 5 kW fully superconducting homopolar motor which has high temperature superconducting armature and field coils is manufactured and tested in liquid nitrogen. The critical current test results of the used 2G superconducting wire, pancake coil for rotor winding and race-track coils for armature winding are reported. Also, the test result of rotating and operating performance is presented. The operating frequency is to be 5 Hz for low-speed rotating. The developed fully superconducting Homopolar motor is the world's first.

• Fibers and Polymers
• /
• v.3 no.3
• /
• pp.103-108
• /
• 2002

The viscosity effect of matrix polymer on melt exfoliation behavior of an organoclay in poly($\varepsilon$-caprolactone) (PCL) was investigated. The viscosity of matrix polymer was controlled by changing the molecular weight of poly($\varepsilon$-eaprolactone), the processing temperature, and the rotor speed of a mini-molder. Applied shear stress facilitates the diffusion of polymer chains into the gallery of silicate layers by breaking silicate agglomerates down into smaller primary particles. When the viscosity of PCL is lower, silicate agglomerates are not perfectly broken into smaller primary particles. At higher viscosity, all of silicate agglomerates are broken down into primary particles, and finally into smaller nano-scale building blocks. It was also found that the degree of exfoliation of silicate layers is dependent upon not only the viscosity of matrix but thermodynamic variables.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.921-925
• /
• 1988

An attractive approach to speed of induction motors is to achieve full linearization via appropriate feedback. However, the prior results toward this direction are based on full feedback. In practice, rotor fluxes are not directly measurable but can be estimated using observers. We propose a nonlinear feedback controller with an observer. As t${\rightarrow}{\infty}$, the closed-loop system with our controller becomes as if it were a linearly decoupled system. We provide the stability analysis of our control method. Simulation and experimental results are also included to demonstrate the practical significance of our results.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.907-908
• /
• 2006

The energy storage systems are being widely researched for the electric power. The operations running in a vacuum chamber mainly consists of a composite flywheel rotor, superconductor bearings, a motor/generator and its controller. Among composed the apparatus, the floating magnet bearing consists of the ring-type permanent magnets with epoxy resin impregnation for reinforcement and surface protection. In order to storage as much energy as possible, the flywheel is supposed to be rotated with very high speed. The magnetic field is analyzed by using the Maxwell 2D/3D for the simulations.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.775-776
• /
• 2006

Based on the requirement of high power and efficiency in automobile systems, this paper describes an investigation for the optimum design of a permanent magnet reluctance motor(PRM), and then the characteristics of this kind of motor is compared with that of a interior permanent magnet(IPM) motor. The IPM of 4-pole with 6-slot is redesigned into a PRM, which has the same stator and different rotor structure with IPM. Through finite element analysis(FEA) and equivalent circuit method, the PRM has higher salient ratio, higher efficiency at high speed, and lower iron loss compared with IPM.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.75-78
• /
• 2003

In this paper, an active magnetic bearing-based motor-generator(M-G) system is designed and controlled using a digital PID control concept. The plant dynamics consisting of actuator and rigid rotor dynamics are described. And some experiments are conducted with each global control and local control concept. From the whirl test, the M-G set can be controlled within about ${\pm}10{\mu}m$ gap variation at the rotational speed of 6000rpm.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.403-410
• /
• 2015

This study documents the 3-phase BLDC(Brushless DC) motor to improve conventional exhaust fan motor. Energy efficiency, noise, and air pollution reduction for the high-performance vibration of the BLDC motor has been used in many fields. It is necessary to achieve the information of rotor position for driving 3-phase type brushless DC motor. It is also necessary that the PWM control algorithm design for a MOSFET driver to control the motor speed control for each of three phases. BLDC motors for exhaust fan, we studied the controller and software. The control circuit and motor control program through which Exhaust fan up close and person can be used safely and protect the environment.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.2
• /
• pp.199-209
• /
• 2013

This paper presents the model test results of 3 new spar platforms which were developed based on the OC3-Hywind spar to support a 5-MW wind turbine. By changing the shape but keeping both volume and mass of OC3-Hywind spar platform, those platforms were expected to experience different hydrodynamic and hydrostatic loads. The scale models were built with a 1/128 scale ratio. The model tests were carried out in waves, including both rotating rotor effect and mean wind speed. The characteristic motions of the 3 new models were measured; Response Amplitude Operators (RAO) and significant motions were calculated and compared with those of OC3-Hywind.