• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.103-108
• /
• 2013

This paper describes basic properties tests and non-rotating dynamic test for rotor blade, flexbeam, and torque tube of which bearingless rotor in helicopter consists. A basic properties test are bending and twist test to find the flap stiffness, lag stiffness, and twist stiffness of specimens. The purpose of dynamic test is to find natural frequencies and modes in non-rotating state. The test results are used to update the analysis model. The updated analysis results using rotorcraft comprehensive code match the tests quite well. The updated model input based on the tests will be utilized to analysis the conditions of rotating whirl tower test before the whirl test and will be compared with the whirl tower test results.

• 한국해양공학회지
• /
• 제35권5호
• /
• pp.347-359
• /
• 2021

This study aims to evaluate the dynamic responses of the jacket-type offshore wind turbine using FAST software (Fatigue, Aerodynamics, Structures, and Turbulence). A systematic series of simulation cases of a 5 MW jacket-type offshore wind turbine, including wind-only, wave-only, wind & wave load cases are conducted. The dynamic responses of the wind turbine structure are obtained, including the structure displacement, rotor speed, thrust force, nacelle acceleration, bending moment at the tower bottom, and shear force on the jacket leg. The calculated time-domain results are transformed to frequency domain results using FFT and the environmental load with more impact on each dynamic response is identified. It is confirmed that the dynamic displacements of the wind turbine are dominant in the wave frequency under the incident wave alone condition, and the rotor thrust, nacelle acceleration, and bending moment at the bottom of the tower exhibit high responses in the natural frequency band of the wind turbine. In the wind only condition, all responses except the vertical displacement of the wind turbine are dominant at three times the rotor rotation frequency (considering the number of blades) generated by the wind. In a combined external force with wind and waves, it was observed that the horizontal displacement is dominant by the wind load. Additionally, the bending moment on the tower base is highly affected by the wind. The shear force of the jacket leg is basically influenced by the wave loads, but it can be affected by both the wind and wave loads especially under the turbulent wind and irregular wave conditions.

• 한국소음진동공학회논문집
• /
• 제25권12호
• /
• pp.881-887
• /
• 2015

The stiffness and natural frequencies for blades, flexbeam, and torque tube of bearingless rotor system are measured to determine the material input properties such as mass distributions and stiffness distribution for the rotor dynamics and load analysis. The flap stiffness, lag stiffness, and torsional stiffness are calculated by measuring section strain or twist angle, gages position, and applied loads through bending and twist tests. The modal tests are undertaken to find out the natural frequencies for flap, lag, torsion modes in non-rotating conditions. The stiffness values and mass properties are tuned and updated to match prediction frequencies to the measured frequencies. The rotorcraft comprehensive code(CAMRAD II) is used to analyze the natural frequencies of the specimens. The analysis results with the updated material properties agree well with the measured frequencies. The updated properties will be used to analyze the rotor stability, dynamic characteristics and loads for the rotor rotation test in a whirl tower.

• 한국항공우주학회지
• /
• 제46권3호
• /
• pp.237-243
• /
• 2018

본 연구에서는 고 전진비 조건의 로터에 대해 전진비 변화에 따른 허브 진동하중의 변화를 예측하고, 블레이드에서 발생하는 구조하중 예측 및 조화 분석을 통하여 구조하중 변화를 고찰하였다. 로터 전진비는 0.40부터 0.71까지 범위를 가지며, NASA에서 수행한 풍동시험 결과에 대해 수치묘사 연구를 수행하였다. 검증한 결과를 토대로 허브 진동하중 및 블레이드 모멘트를 예측하였다. 허브 진동하중은 최초에 증가하다가 전진비가 0.5 이상의 경우에는 변화가 거의 없음을 보여주었다. 블레이드 구조하중은 전진비가 증가할수록 진폭의 크기가 증가하며, 블레이드 모멘트의 조화 분석을 수행한 결과 플랩 모멘트는 3/rev, 래그모멘트는 4/rev의 영향이 매우 크다는 점을 확인하였다. 이는 전진비가 증가할수록 2차 플랩과 2차 래그 모드의 고유진동수가 각각 3/rev와 4/rev에 근접하기 때문인 것으로 파악되었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 추계 학술대회논문집
• /
• pp.200-205
• /
• 2003

The Canard rotor/wing (CRW) aircraft concepts offer great potential for application by allowing the use of a common propulsion system for high-speed cruise and low-speed powered lift. Using the rotor for lift in both flight modes increases its utility. In the hovering mode, the exhausted gas from an gas turbine engine is accelerated through the duct system and it provides the tipjet power for rotor system enough to lift the aircraft. In the cruise mode, the rotor is fixed and the exhausted gas is extracted through the main nozzle, such that the aircraft is able to flight with high speed. The duct system was designed using 1-D fanno line flow theory and empirical data. However, the empirical data of the pressure loss coefficient for various bending and dividing ducts were not enough to design our duct system adaptively. Therefore, using 3-D CFD analysis we obtained the pressure loss coefficient for our duct models and chose the appropriate bending or diving duct type. In this paper, we used the CFD-ACE+ software package for the CFD analysis and the modeling of duct system. Through the 3-D CFD analysis, we investigated also the pressure loss and the velocity distributions of the designed whole duct system as well as the blade duct. Comparing the 3-D CFD result with 1-D analysis result, we lessened the uncertainty of the designed duct system and speculated the problem that was not concerned in design state.

• 한국항공우주학회지
• /
• 제41권7호
• /
• pp.561-568
• /
• 2013

7,000lb 급 헬리콥터를 위한 무베어링 로터 허브 시스템을 설계한 후, 무베어링 로터 허브 시스템의 주요 구성품 중 하나인 유연보에 대해 요구수명 8,000시간을 만족하는지 확인하기 위한 피로해석을 수행하였다. 2차원 탄성 보 모델에 대한 단면 구조해석 방법을 적용하였으며, 정적구조해석을 통해 피로손상에 취약할 것으로 예상되는 두 단면에 대한 피로해석을 수행하였다. 구조해석을 위해 VABS를 사용하여 유연보 단면 형상에 대한 인장, 굽힘 및 뒤틀림 강성을 계산하였고, wohler equation을 적용하여 유연보를 구성하는 두 가지 복합재 소재에 대한 S-N 곡선을 생성하였다. CAMRAD II를 통해 무베어링 로터 시스템의 하중해석을 수행하였으며, 하중해석 결과를 HELIX/FELIX 표준하중 스펙트럼에 적용하여 무베어링 로터 시스템의 하중 스펙트럼을 생성한 후, 이를 통해 피로해석을 수행하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.108-111
• /
• 2004

Structural dynamic characteristics and aeroelastic stability of a small-scale bearingless rotor system have been investigated. A flexbeam is one of the most important component of bearingless hub system. It must have sufficient torsional flexibility as well as baseline stiffness in order to produce feathering motion. In the present paper, a cross-shaped composite flexbeam has been proposed for a guarantee of torsional flexibility and flapwise and lagwise bending stiffness. One dimensional elastic beam model was used for the construction of a structural model. Equivalent isotropic sectional stiffness was used in the blade model, and the flexbeam was regarded as anisotropic; which has ten independent stiffness quantities. CAMRAD II has been used for the analysis of structural dynamic characteristics of the bearingless rotor system. Rotational natural frequencies and aeroelastic stability at hovering have been investigated. Analysis result shows that the cross-shaped flexbeam has the rotational natural frequency tuning capacity.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.857-863
• /
• 2003

In rotating machinery, unbalance and misalignment are major concerns in vibration. Unbalance can be eliminated by balancing procedure to some degree. but little work has been done on the vibrations that occur in a misaligned rotor system. Currently, no generalized theoretical model based on a rotor system with flexible coupling is available to describe the vibrations caused by misalignment. As a part of systematic investigation on the misalignment, first of all, the study on flexible coupling with misalignment should be preceded. In this study, the geometry and reaction force and moment of a gear coupling with misalignment was investigated, also the theoretical model of a gear coupling with misalignment was presented by using the relationship between geometry and moment of gear coupling. It is expected that the proposed procedure can be applied to derive the theoretical model of other couplings.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.418-422
• /
• 2001

This paper presents a developed squired cage induction motor for axial flow fan. The developed squirrel cage induction noter for axial flow fan is exchanged the position, rotor and stater. In this method a fan blade is attached to outside rotor. So we can protect the motor from rain and reduce noise, and there is no need to have bending duct to locate the fan motor. Carried out experimental test with this induction motor, and the results were as follows. Starting torque was 21kgㆍcm@120V, maximum efficiency was 0.84@120V. The characteristics of tests were the same as double squirrel-cage type IM.

• 대한기계학회논문집A
• /
• 제38권6호
• /
• pp.691-698
• /
• 2014

본 논문에서는 복합재료를 이용하여 플렉스빔과 토크튜브를 제작하기 위한 공정과 기본 물리량 시험과정을 소개하였다. 플렉스빔과 토크튜브는 헬리콥터에 적용되는 무베어링 로터 허브 시스템을 구성하기 위한 핵심 구성품이다. 토크튜브는 블레이드의 피치각을 변화시키기 위한 조종력을 전달하며, 플렉스빔은 구조적인 변형을 통해 플랩, 래그 및 페더링 힌지를 구현하는 기능을 담당한다. 지상회전시험을 수행하기에 앞서 플렉스빔과 토크튜브 및 블레이드의 플랩강성, 래그강성 및 토션강성을 측정하기 위한 기본 물리량 시험을 수행하였다. 또한, 해석을 통해 예측된 단면 강성과 기본 물리량을 통해 획득된 강성 값을 비교하였으며, 그 결과를 통해 복합재료로 제작된 플렉스빔과 토크튜브가 구조적인 강성 요구도를 만족함을 확인할 수 있었다.