• Economic and Environmental Geology
• /
• v.30 no.6
• /
• pp.613-624
• /
• 1997

A study of anisotropy of magnetic susceptibility (AMS) was conducted on the Ordovician-Eocene strata in the Taebaek area. The study area is a northeastern part of the Okchon belt, sometimes called as Paegunsan Synclinal Area. A total of 600 independently oriented samples were collected from 60 sites covering the whole area. With a few exception of late Cretaceous-Eocene volcanic rocks, all the sampled strata are nonmetamorphosed sedimentary rocks, mainly sandstones. Among the 60 sites, 5 sites showed flow lineation lying on the bedding plane, 11 sites showed load foliation parallel to the bedding plane, and 21 sites showed tectonic foliation unrelated to the bedding plane. The tectonic foliations are defined by $k_1-k_2$ ($k_{max}-k_{int}$) anisotropy plane, and are considered as a result of tectonic forces acted perpendicularly to the foliation plane in the geologic past. Regardless of sample-site locations, tectonic force directions defined by $k_3$ ($k_{min}$) axis perpendicular to the tectonic foliation are consistent among the strata of the same geologic age. In the course of geologic time, however, the tectonic force directions showed a clockwise rotation: approximately E-W in the Ordovician sites, NW-SE in the Permian sites, N-S in the Triassic sites, and lastly NE-SW in the late Cretaceous-Eocene sites. The pre-Permian directions showed better clustering in the in-situ (geographic) coordinates, while the younger directions become better clustered after the bedding-tilt correction. It is interpreted that the major tectonic structures of the Taebaek area were controlled by the above-mentioned tectonic forces: The Paegunsan Syncline and the Hambaeksan Fault must have been generated by the NW-SE force of late Permian-early Triassic time. It was then reactivated in the reverse (dextral) sense by the N-S force of Triassic time. The Osipchon Fault in the eastern part of the study area was either generated or reactivated by the NE-SW force of late Cretaceous-Eocene time. The Permo-Triassic NW-SE force should be an expression of the Songnim Disturbance in the Korean peninsula, which is in turn related with the SCB/NCB collision in China.

• Journal of radiological science and technology
• /
• v.34 no.4
• /
• pp.297-303
• /
• 2011

The existing studies of VDT syndrome have been researched only about for nurse groups without radiological technologists. The target of this study was workers who perform VDT task in general hospital placed in Daejun City such as insurance judgement, patient affairs, medical record management, medical computing service, hospital administration, and radiological sections. This study was conducted at October 15, 2009 to November 2, 2009 using structured questionnaire. Results of group A (age 20-29, less than 5 years experience at clinical site, normal staff, and unmarried group) showed significant skin and psychological conditions among recognition symptoms of VDT syndrome. Group B (age 30-39, 6-10 years experience at clinical site, managing staff, and married group) tends to be similar at orbital, whole body and muscles' frame response among recognition symptoms of VDT syndrome. Results of "Multiple Linear Regression" with dependent variable that is scores of recognition symptoms of VDT syndrome are as follows. The factors which influences for orbital-related problem is gender, health cares and obstacles during daily life. The factors which influences for whole body-related is exercise, stress and recognition for health condition and the factors which influences muscles' frame-related is 6-10 years experience at clinical site, human relationship, health cares and obstacles during daily life. These are proved to be similar by statistic analysis. There is small difference at recognition symptom of VDT syndrome between the radiological technologist and other groups in general hospital. Yet, as the working circumstance of radiological technologist gradually changes to VDT environment, the recognition symptom of VDT syndrome became conscious. This can be prevented by regular job rotation, which will escape the continuous repetition of working pattern.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.1
• /
• pp.37-43
• /
• 2003

Purpose: This study is to analyse the injury patterns of knee ligament and the factors influencing ligament injuries of knee, and to evaluate the changes of knee function and activity after ski injury. Materials and Methods: Thirty cases of ligament injuries of knee were studied with a questionaire, stress radiographs, magnetic resolution imaging, and physical examination. Mean age was 28.6 years old and mean follow up was 29.6 months. Clinical evaluation of Lysholm knee scoring scale was used for knee function and Tegner activity score was used for activity change after ski injury. Results: The anterior cruciate ligament (ACL) injury accompanied with medial collateral ligament(MCL) injury was most in 11 cases and isolated MCL injury was the next in 9 cases. The common types of injury mechanism were Phantom foot phenomenon (13 cases, 43$\%$) and valgus external rotation injury (12 cases, 40$\%$), which constitute 83$\%$ of all case. At the last follow up, the mean Lysholm score was 93.4 and mean Tegner activity score was 4.2. The reduced Tegner activity score after injury was 1.9. Among several injury groups, the evaluation of knee function and activity was best in the isolated MCL injury group and worst in the ACL injury accompanied with MCL injury group. The factors to influence ski injury were participation to ski class, release of binding, and skiing long time more than 2 hours. Conclusions: Lysholm score at last follow up revealed good grading, but sports activity after ski injury was reduced when compared with pre-injury state. It seems to need a active, systemic sports rehabilitation program after sports injury.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.3
• /
• pp.303-312
• /
• 2008

Multi-axial compression tests have been frequently adopted for the evaluation of material properties of rock cores and rock fracture model tests. Special care has to be applied on the boundary condition between the specimen and loading platen to draw the precise test results of the multi-axial compression tests. With the use of dry steel platen, the stress rotation will occur, due to the frictional restraint from the boundary between the specimen and loading platen. The restraint will deviate the expected test results under the conditions of the given external pressures. Various methods have been applied to reduce the side restraint along the specimen/loading platen interface. The steel brush type loading platen is one example of the attempts. In this paper, a new type of loading platen is introduced to overcome the limitation caused by the use of the brush type loading platen, which requires some internal space for the installation of the brushes. The new type of loading platen, roller supported steel piston type loading platen. is constituted of shot steel pistons which have sufficient stiffness to deliver the external pressure and the shaft type roller installed at the rear of the pistons. The pistons are designed to follow the local deformation of the specimens. In this paper, structural details of the loading platen are presented and frictional and biaxial compression tests results are shown to verify the required functions of the loading platen. Furthermore, calibration process is followed by a comparison between the test results and numerical analyses.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.147-157
• /
• 2018

The basis of capacity design has been explicitly or implicitly regulated in most bridge design specifications. It is to guarantee ductile failure of entire bridge system by preventing brittle failure of pier members and any other structural members until the columns provides fully enough plastic rotation capacity. Brittle shear is regarded as a mode of failure that should be avoided in reinforced concrete bridge pier design. To provide ductility behavior of column, the one of important factors is that flexural hinge of column must be detailed to ensure adequate and dependable shear strength and deformation capacity. Eight small scale circular reinforced concrete columns were tested under cyclic lateral load with 4.5 aspect ratio. The test variables are longitudinal steel ratio, transverse steel ratio, and axial load ratio. Eight flexurally dominated columns were tested. In all specimens, initial flexural-shear cracks occurred at 1.5% drift ratio. The multiple flexural-shear crack width and length gradually increased until the final stage. The angles of the major inclined cracks measured from the vertical column axis ranged between 42 and 48 degrees. In particular, this study focused on assessing transverse reinforcement contribution to the column shear strength. Transverse reinforcement contribution measured during test. Each three components of transverse reinforcement contribution, axial force contribution and concrete contribution were investigated and compared. It was assessed that the concrete stresses of all specimen were larger than stress limit of Korea Bridge Design Specifications.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.1-9
• /
• 2018

The development of new technology and process in industrial Plant which builds integrated structures, facilities and systems. Has become a key element for strengthening its competitiveness. Although domestic industrial Plant has demonstrated excellence in technology with a persistent increase in order quantity and orders received, the technology gap between countries has narrowed due to global construction trend. Therefore, it is necessary to develop new technology that could help overcome constraints and limitations of the current one to follow the trend in the age of unlimited competition. This study has focused on assembly technology of Pipe-rack joint connection in an effort to strengthen technological competitiveness in industrial Plant. Through an analysis of earlier studies on Pipe-rack and a coMParative analysis of strengths and weaknesses of current assembly technology of it, a new design plan has been made to improve it efficiently. In doing this, standards for design factors of both structural and performance features have been drawn, and value of stress, strain, moment and rotation has been calculated using finite element analysis. As a result, installation technology of modular type Pipe-rack, which has not been developed in Korea and is differentiated from the current one, has been developed. It is considered that the technology reduces work time and saves cost due to simplified joint connection of steel structure, unlike the current one. Moreover, since it is installed without a welding process in the field, industrial accidents would be reduced, which is likely to have economic competitiveness and satisfy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.677-687
• /
• 2017

Aircraft can often be exposed to a variety of environments and vibrations such as engine, hydraulic pump, aerodynamic force. These may cause cracking and destruction of the mechanical structure and sub-components by high-cycle fatigue. The axial piston type pump which is usually applied to the aircraft hydraulic pump can be necessarily accompanied by the fluid pulsation by continuous rotation of the axial piston. The fatigue crack was identified at the dampener fitting welding zone to prevent vibration damping during the running of aircraft equipped with this type of pulsation hydraulic pump. In order to understand the root cause of this matter, fracture and component analyses were carried out and also integral type dampener fitting was applied to prevent recurrence of the crack as a subject of design improvements. Structural integrity stress analysis, fatigue analysis, qualification test and aircraft system equipped test was conducted to verify the design validity in application to integral type dampener fitting. The test results were sufficiently satisfactory with the demand lifetime of the material from the various types of test as conducted and the subject of design improvement in this study could be objectively evaluated that shall be applied to the operational aircraft.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.06a
• /
• pp.7-8
• /
• 2011

Basically, the lattice mismatch between film and substrate can make those BiFeO3(BFO) films distorted with strain structure. BFO phase can be stabilized on LaAlO3(LAO) represents the example of a multiferroic with giant axial ratio. Its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion and related to the rotation of the oxygen octahedra. In this study, we show that phases with a tetragonal-like epitaxial BFO films can indeed be ferroelectric and also can be stabilized via epitaxial growth onto LAO. Recent reports on epitaxial BFO films show that the crystal structure changes from nearly rhombohedral ("R-like") to nearly tetragonal("T-like") at strains exceeding approximately -4.5%, with the "T-like" structure being characterized by a highly enhanced c/a ratio. While both the "R-like" and the "T-like" phases are monoclinic, our detailed x-ray diffraction results reveal asymmetry change from MA and MC type, respectively. By applying additional strain or by modifying the unit cell volume of the film by substituting Ba for Bi, the monoclinic distortion in the "T-like" MC phase is reduced, i.e. the system approaches a true tetragonal symmetry. There are two different M-H loops for $Bi_{1-x}Ba_xFeO_{3-{\delta}}$(BBFO) and BFO films on SrTiO3(STO) & LAO substrates. Along with the ferroelectric characterization, these magnetic data indicate that the BFO phase stabilized on LAO represents the first example of a multiferroic with giant axial ratio. However, there is a significant difference between this phase and other predicted ferroelectrics with a giant axial ratio: its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion. Therefore, in going from bulk to highly-strained films, a phase sequence of rhombohedral(R)-to-monoclinic ["R-like" MA-to-monoclinic, "T-like" MC-to-tetragonal (T)] is observed. This sequence is otherwise seen only near morphotropic phase boundaries in lead-based solid-solution perovskites (i.e. near a compositionally induced phase instability), where it can be controlled by electric field, temperature, or composition. Our results show that this evolution can occur in a lead-free, stoichiometric material and can be induced by stress alone. Those major results are summarized as follows ; 1) Ba-doping increases the unit cell volume, 2) BBFO on LAO can be fully strained up to x=0.08 as a strain limit (Fig. 1), 3) P(E) & M(H) properties can be tuned by the variation of composition, strain, and film thickness.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.11
• /
• pp.1615-1634
• /
• 2004

A review was undertaken to obtain information on the sustainability of pig free-range production systems including the management, performance and health of pigs in the system. Modern outdoor rearing systems requires simple portable and flexible housing with low cost fencing. Local pig breeds and outdoor-adapted breeds for certain environment are generally more suitable for free-range systems. Free-range farms should be located in a low rainfall area and paddocks should be relatively flat, with light topsoil overlying free-draining subsoil with the absence of sharp stones that can cause foot damage. Huts or shelters are crucial for protecting pigs from direct sun burn and heat stress, especially when shade from trees and other facilities is not available. Pigs commonly graze on strip pastures and are rotated between paddocks. The zones of thermal comfort for the sow and piglet differ markedly; between 12-22$^{\circ}C$ for the sow and 30-37$^{\circ}C$ for piglets. Offering wallows for free-range pigs meets their behavioural requirements, and also overcomes the effects of high ambient temperatures on feed intake. Pigs can increase their evaporative heat loss via an increase in the proportion of wet skin by using a wallow, or through water drips and spray. Mud from wallows can also coat the skin of pigs, preventing sunburn. Under grazing conditions, it is difficult to control the fibre intake of pigs although a high energy, low fibre diet can be used. In some countries outdoor sows are fitted with nose rings to prevent them from uprooting the grass. This reduces nutrient leaching of the land due to less rooting. In general, free-range pigs have a higher mortality compared to intensively housed pigs. Many factors can contribute to the death of the piglet including crushing, disease, heat stress and poor nutrition. With successful management, free-range pigs can have similar production to door pigs, although the growth rate of the litters is affected by season. Piglets grow quicker indoors during the cold season compared to outdoor systems. Pigs reared outdoors show calmer behaviour. Aggressive interactions during feeding are lower compared to indoor pigs while outdoor sows are more active than indoor sows. Outdoor pigs have a higher parasite burden, which increases the nutrient requirement for maintenance and reduces their feed utilization efficiency. Parasite infections in free-range pigs also risks the image of free-range pork as a clean and safe product. Diseases can be controlled to a certain degree by grazing management. Frequent rotation is required although most farmers are keeping their pigs for a longer period before rotating. The concept of using pasture species to minimise nematode infections in grazing pigs looks promising. Plants that can be grown locally and used as part of the normal feeding regime are most likely to be acceptable to farmers, particularly organic farmers. However, one of the key concerns from the public for free-range pig production system is the impact on the environment. In the past, the pigs were held in the same paddock at a high stocking rate, which resulted in damage to the vegetation, nutrient loading in the soil, nitrate leaching and gas emission. To avoid this, outdoor pigs should be integrated in the cropping pasture system, the stock should be mobile and stocking rate related to the amount of feed given to the animals.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.392-402
• /
• 2021

The present study investigated the effects of tillage practices (deep cultivation [DC] and conventional tillage [CT]) and extended planting dates (mid-June to July) for maize-onion rotation in paddy fields. The silage corn (Zea mays L.) cultivar 'Kwangpyeongok' and the waxy corn cultivar 'Ilmichal' were planted on June 14, July 3, and July 15 in 2019. In both maize, the plant height of June 14 planted was up to 100 cm greater than that of July 15 planted on August 16 and up to 40 cm on August 30. At 30 Days after planting, the leaf area index (LAI) of silage corn planted on July 3 and 15 greater than that of corn planted on June 14 due to high temperature in the early season; however, there were no differences in the LAI of waxy corn according to the planting date. Despite favorable temperature, plants sown on July 3 and 15 experienced high moisture stress during the seedling stage due to consistent rainfall, and waxy corn was highly sensitive to high moisture stress. The total yield of silage corn was 1,232 (845 in TDN), 860 (598 in TDN), and 765 (508 in TDN) DW kg·10a^-1 for plants sown on June 14, July 3, and July 15, respectively. The fresh marketable ear yield of waxy corn was 872, 814, and 525 FW kg·10a^-1 for plants sown on June 14, July 3, and July 15, respectively. After the completion of maize cultivation, onion seedlings (Allium cepa L.) were transplanted on November 12, 2019, and harvested on May 27, 2020. Neither summer tillage nor maize planting date affected onion growth or yield. The marketable onion yield was 8,305 and 7,848 kg·10a^-1 with DC and CT, respectively. In conclusion, DC did not improve maize growth or yield under paddy conditions. Mid-June to early July is a practical window for maize planting for growers in this region.