• 유공압시스템학회:학술대회논문집
• /
• 유공압시스템학회 2010년도 춘계학술대회
• /
• pp.33-38
• /
• 2010

As for an oil hydraulic vane pump of vehicle hydraulic systems, the highest of planning technique required by the acquisition of optimum profile data which can be available to predict noises and vibrations. Pressure pulsation may result in considerable vibration and noise of pump component as well as cavitation in hydraulic system. The influences of the discharge pressure and rotating speed of the vane on the dynamic pressure in chamber surrounding a vane have been investigated. It is very important to predict pressure pulsation in vane pump. This paper presents analysis of technique of vane pump for automatic transmission. The predicted result using AMESim model were good agreement with the experimentally obtained results.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 추계 학술대회논문집
• /
• pp.114-119
• /
• 2002

A numerical model is employed for design of a spinner device to dry the 5-th generation LCD glass panel. The turbulent flow in a spinner is driven by rotation of a large disk and suction by the exhaust system connected to vacuum chamber, which is simulated by using the FLUENT package. Based on numerical simulation, the required capacity of exhaust system is assessed. The effects of the presence of cover on the flow characteristics are examined. A computational trouble shooting is attempted to resolve the problem of panel rising which occurred in real experiments.

• 한국산학기술학회논문지
• /
• 제1권1호
• /
• pp.33-36
• /
• 2000

대형 진공증착기내에 대형 피코팅물 고정대를 방사형으로 배치고 대용량의 피코팅물이 균일하게 코팅되도록 공전과 자전을 병행하도록 하여, 1회 진공으로 피코팅물의 양면을 동시에 코팅하므로 증착시간을 절약하고 전력소비를 줄일 수 있으며 대기중 이물질에 의한 오염방지를 할 수 있었다. 내부에 이중 전자빔을 설치하여 자동 다층막 증착이 가능하며, 유효증착면적을 크게 할 수 있었다. 이런 장치를 이용하여 증착 시간의 30% 단축, 작업 생산성 50% 향상과 아울러 증착막의 전도막 특성도 향상되었으며 증착막의 균일도도 향상되었다. 증착막의 광학적 특성인 반사방지 투과율 특성도 향상되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.18-20
• /
• 1995

This paper describes a 7.5T magnetic flux density superconducting wiggler that minimize net angular deflection and displacement of an electron rotating along the orbit at storage ring in Pohang Light Source. It consist of dipole superconducting magnet,high uniformity flux distribution due to current source supply,cryostat,vacuum chamber,measurement system. In this paper magnet design procedure, manufacturing, experimental results are contained.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.791-798
• /
• 2001

As the form factor of the disk drive is decreased, many mechanical issues that are negligible in larger form factors, should be considered for the design of the miniature drives. This paper deals with basic research on vibration characteristics and design considerations of small disks and actuators. The natural frequencies of micro-sized disks with polycabonate and glass substrates are experimentally measured, being compared to FEM results. In order to investigate the effects of rotating speeds, airflow and disk size on power consumption. we measure power imposed to spindle motor when different optical disks are spins in vacuum chamber. Finally, The vibration characteristics of the micro actuator used in a IBM Microdrive are experimentally studied for the application to the basic design of micro optical disks.

• Biomolecules & Therapeutics
• /
• 제15권1호
• /
• pp.27-33
• /
• 2007

The psychopharmacological profile of ginsenosides has not yet been confirmed systematically although various neuropharmacological activities associated with them have been investigated. In the present study, the psychological activities of Rb1 were investigated to evaluate whether it can be used in treatment or prevention of psychological disorders. Rb1 was intravenously injected at doses of O.2,2,5 and 10 mg/kg. The effects of Rb1 on the $Cl^-$ ion influx were investigated using IMR-32 human neuroblastoma cells. Moreover, locomotor activity, forced swimming activity, activity on rotating rod and activity in elevated plus-maze were tested in mice. Rb1 increased the $Cl^-$ influx into the intracell region in a dose-dependent manner. Rb1 did not cause change in behavior in total open field when locomotor activity was tested, however it increased activities, especially, such as rearing frequency in center area. Administration of Rb1 at 0.2 mg/kg significantly reduced activities on rotating rod however administration at high dosages had no effect on them. Rb1 administration decreased animal immobile time in a water chamber in a dose dependent manner, and increased the strong mobile time of animals. In conclusion, the present results demonstrate that Rb1 contributes to the psychopharmacological effects of ginseng and may be used in treatment or prevention of psychological disorders such as anxiety or depression.

• 드라이브 ㆍ 컨트롤
• /
• 제11권4호
• /
• pp.15-24
• /
• 2014

It is difficult to analytically derive a volumetric displacement formula for a gerotor hydraulic motor due to the complexity of the geometric shape of its gear lobes. This work proposes an analytical method for the volumetric displacement, a relatively easy method based upon two physical concepts: conservation between hydraulic energy and mechanical shaft energy, and torque equilibrium for the rotor's motion. The first research using these concepts was conducted on inner and outer rotors rotating with respect to each rotor axis. This work represents the second report conducted on an inner rotor revolving as a planetary motion on the stationary outer rotor. The formula equations regarding the volumetric displacement and flow rate are derived, and the proposed formula about the volumetric displacement is proven to be the same as another analytical displacement formula: the so-called vane length method. From the formula, volumetric displacement is calculated for an example geometry of the gear lobes. The resultant displacement is confirmed to be the same as the value calculated from the chamber volume method. The proposed analytical formula can be utilized in the analysis and design of gerotor hydraulic motors. Because it is based on torque equilibrium, this formula can provide a better understanding of torque performance, such as torque ripple, in designing a gerotor type motor.

• 한국의학물리학회지:의학물리
• /
• 제23권4호
• /
• pp.229-233
• /
• 2012

광자선 출력측정시 업무 효율을 높이기 위한 소형 물팬톰(듀얼윈도우 팬톰)을 개발하였다. 이 팬톰은 고에너지 광자선의 출력측정뿐만아니라 선질지표의 결정에 적합하다. 이 팬톰은 두개의 창을 가지고 있으며 독립된 두 축에 의해 회전할 수 있도록 제작되어있다. 이 때 두 축은 전리함 이동 없이 조직팬톰선량비와 깊이선량율비를 결정하기 위한 것이다. 코발트조사기와 선형가속기의 고에너지 광자선을 이용하여 팬톰을 평가하였으며, 기준값과 비교할 때 Co-60의 경우 0.2% 그리고 가속기 x-선에 대해 1.4% 이내로 일치하였다. 이 팬톰은 발생 가능한 인적오차를 방지할 수 있기 때문에 일상의 출력측정에 매우 실용적이라고 본다.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.138-145
• /
• 2012

The material used in this study is dielectric and ferrite. Because of the unique characteristics of the material, it is easily exposed to external shocks and pressure, which cause damage to the product. However, after being processed under high-temperature environment repeatedly, the mechanical strength of the product is greatly increased due to the change of the electrical properties. In this paper, dielectric and bonded ferrite material was tested for the material properties. The equipment for this experiment was produced and tested to allow Cylindrical and Three-dimensional geometry of the product for the vacuum deposition. For Cylindrical shape of the product, in order to obtain the equivalent film thickness, the device is constructed in a vacuum chamber which gives arbitrary revolving and rotating capability. The electrical performance of the product is obtained through this process as well. However, as mentioned above, with repeating processes under high temperature and exposure to external environment, the product is easy to be broken. This experiment has enabled us to find out a stable condition to apply the communication of the RF high frequency to each of the core elements, such as Ferrite and Dielectric which is then used for the mechanical strength of the Raw material, hetero-junction material, Hetero-junction Ag Coating material and hetero-junction Ag Coating SiO2 Coating material respectively.

• 한국추진공학회지
• /
• 제9권2호
• /
• pp.78-88
• /
• 2005

산화제 주입기 배열 변화에 따른 End-Burning 하이브리드 연소기의 연소실 내부 유동장의 특성 및 온도장 분포도의 경향을 파악하기 위해 수치해석적 연구를 수행하였다. 스월을 동반하는 하이브리드 연소실내 확산 화염의 주요 거동을 얻기 위해 7가지의 다른 O/F 비를 갖는 연소의 기본 특성을 분석하였다. 산화제 주입기의 위치 변화 및 공급방식이 연료와 산화제의 혼합율을 크게 지배하고 온도분포에도 강한 영향을 미치는 것을 확인할 수 있었다. 본 연구에 사용된 여러 산화제 주입기 배열중에서 counter rotating 유동을 유발시키는 주입기가 가장 좋은 혼합효율을 보였으나 벽면 근처에서 관찰된 고온부의 발생 문제가 대두되었다.