Feky, Hadeer Mostafa El;Ezzat, Khalid Mohammed;Bedier, Marwa Mahmoud Ali
Restorative Dentistry and Endodontics
/
제44권4호
/
pp.44.1-44.11
/
2019
Objectives: To compare the flexural cyclic fatigue resistance and the length of the fractured segments (FLs) of recently introduced M-Pro rotary files with that of RaCe rotary files in curved canals and to evaluate the fracture surface by scanning electron microscopy (SEM). Materials and Methods: Thirty-six endodontic files with the same tip size and taper (size 25, 0.06 taper) were used. The samples were classified into 2 groups (n = 18): the M-Pro group (M-Pro IMD) and the RaCe group (FKG). A custom-made simulated canal model was fabricated to evaluate the total number of cycles to failure and the FL. SEM was used to examine the fracture surfaces of the fragmented segments. The data were statistically analyzed and comparisons between the 2 groups for normally distributed numerical variables were carried out using the independent Student's t-test. A p value less than 0.05 was considered to indicate statistical significance. Results: The M-Pro group showed significantly higher resistance to flexural cyclic fatigue than the RaCe group (p < 0.05), but there was no significant difference in the FLs between the 2 groups (p ≥ 0.05). Conclusions: Thermal treatment of nickel-titanium instruments can improve the flexural cyclic fatigue resistance of rotary endodontic files, and the M-Pro rotary system seems to be a promising rotary endodontic file.
Objectives: This study compared the mechanical properties of various instruments for canal exploration and glide-path preparations. Materials and Methods: The buckling resistance, bending stiffness, ultimate torsional strength, and fracture angle under torsional load were compared for C+ file (CP, Dentsply Maillefer), M access K-file (MA, Dentsply Maillefer), Mani K-file (MN, Mani), and NiTiFlex K-file (NT, Dentsply Maillefer). The files of ISO size #15 and a shaft length of 25 mm were selected. For measuring buckling resistance (n = 10), the files were loaded in the axial direction of the shaft, and the maximum load was measured during the files' deflection. The files (n = 10) were fixed at 3 mm from the tip and then bent $45^{\circ}$ with respect to their long axis, while the bending force was recorded by a load cell. For measuring the torsional properties, the files (n = 10) were also fixed at 3 mm, and clockwise rotations (2 rpm) were applied to the files in a straight state. The torsional load and the distortion angle were recorded until the files succumbed to the torque. Results: The CP was shown to require the highest load to buckle and bend the files, and the NT showed the least. While MA and MN showed similar buckling resistances, MN showed higher bending stiffness than MA. The NT had the lowest bending stiffness and ultimate torsional strength (p < 0.05). Conclusions: The tested instruments showed different mechanical properties depending on the evaluated parameters. CP and NT files were revealed to be the stiffest and the most flexible instruments, respectively.
이 연구의 목적은 근단공의 크기가 다양한 치아에서 근단공 확대의 유무에 따른 근관성형시 치아의 미세누출을 평가하기 위함이다. 1근관 치아 60개를 치근첨 상방 5mm에서 절단후 각 치아의 근단공 크기에 따라 큰 근단공 (L) 작은 근단공 (S)으로 나누었다 이 두 군을 치근첨 상방 5mm의 횡단면상 근관의 형태로 원형 (R)과 난형 (O)으로 나누었다(SR, SO, LR, LO). 각 군은 Quantec series Nickel-Titanium (Ni-Ti) rotary file을 이용하여 .02 taper로 성형 후 측방가압법으로 충전하였다. 누출은 40 $cmH_2O$ 압력하에 fluid transport method로 측정하였다. 측정 후 누출이 있는 시편은 .04 taper와 .06 taper로 재근관치료 하여 다세 미세누출을 평가하였다. 통계학적으로 chi-square test와 fisher's exact test를 이용하였다. 결과는 다음과 같다. 1. .02 taper로 성형한 군에서는 근단공의 크기에 따른 미세누출은 통계적으로 유의성이 있었고 (p < 0.05) .04 taper로 성형한 군에서는 통계적으로 유의한 차이를 보이지 않았다 (p > 0.05) .2.근첨 상방 5 mm에서 근관단면의 형태에 따른 미세누출은 통계적으로 유의하지 않았다 (p > 0.05). 3. LR group과 LO group에서는 .02 taper로 성형한 군과 .04 taper로 성형한 군사이에 유의한 차이를 보였다 (p < 0.05).
본 연구는 ProFile, ProTaper 및 K-Flexofile로 근관 성형시 근관의 만곡도에 따라 근관의 형태가 어떻게 변화하는지를 비교 분석하고자 시행되었다. ISO #15 finger spreader를 15도, 30도 및 45도로 만곡시키고 에폭시 레진으로 각각도의 근관을 갖는 30개의 근관 모형을 제작하였다. 근관의 길이는 18mm로 하였고 근관의 만곡은 근관의 입구로부터 10mm 부위에서 시작하도록 제작하였다. 근관 성형에는 엔진 구동형 니켈-타이타늄 파일인 ProFile과 ProTaper, 수동형 stainless steel 파일인 K-Flexofile을 사용하였다. ProFile과 ProTaper는 제조자의 지시에 따라 크라운다운법으로 근관 성형하였고, K-Flexofile은 스텝백법으로 근관 성형하였다. 근첨부 성형은 #25파일 크기까지 시행하였다. 근관 성형 전 후 이미지를 스캐너를 이용하여 얻고 Photoshop 7.0프로그램을 이용하여 중첩하였다. 이미지 분석 프로그램을 이용하여 치근단 쪽에서부터 1, 2, 3, 4, 5, 6, 7, 8, 9및 10mm부위의 내 외측 폭경 변화와 총폭경 및 근관의 중심축에 대한 근관 변위을 측정하였다. 각 부위에서 내 외측 폭경과 총폭경 및 근관 변위의 유의성 검정을 위해 one-way ANOVA분석을 시행하였으며 각 기구간의 유의성 검정은 Scheffe's test로 사후 분석하였다. 또한 기구의 변형과 파절 여부를 평가한 결과 엔진 구동형 니켈-타이타늄 파일인 ProFile과 ProTaper를 사용하여 근관성형시 수동형 스테인레스 스틸 파일인 K-Flexofile에 비해 근관의 변위를 적게 유발하고 특히 ProFile이 근관 성형시 바람직한 기구임을 시사하였다.
대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
/
pp.547-547
/
2003
The aim of this study was to compare the effects of three Ni-Ti instruments on leaning ability by evaluating the volumetric and morphological changes in the apical 6mm of the root canals before and after preparation, using three-dimensionally reconstructed root canals of extracted human teeth. Forty-five teeth were used in this study. They were opened the chambers and removed the all pulp remnants ultrasonically. Subsequently, the canal wall was coated with silver paste and prepared using ProTaper, ProFile and GT rotary files according to the manufacturers instructions. Before and after root canal preparation, all the specimens were scanned with micro computed tomography and examined the differences in dentine volume removed, canal straightening, the proportion of the unchanged area and canal transportation. Quantitative analysis revealed that instrumentation increased in canal volume ranging between 0.081 and $1.866{\;}\textrm{mm}^3$. On average, the large apical preparation produced by ProTaper demonstrated smaller proportions of unchanged surface areas compared to the two other instruments in small canals. But in large canals like maxillary central incisor, the preparation of ProTaper instruments was not enough. ProTaper instrument was tended to increase more in canal volume as compared with the other two instruments but unchanged area was no significant difference. These results showed that three instruments had similar preparation ability and micro computed tomography in combination with the coated wall of root canal using silver paste is a nondestructive and valuable tool to study root canal geometry and changes after preparations in detail.
목적: Wire를 꼬아서 제조한 twisted file (TF)이 개발된 이래, 최근에는 기존 twisted file의 내구성 및 절삭 효과를 증진시키기 위하여 구동방식의 변형을 준 TF-adaptive movement가 소개되었다. 본 연구의 목적은 TF-adaptive movement가 twisted file의 내구성에 미치는 영향을 조사하는 것이다. 연구 재료 및 방법: J자 모양의 근관 형태를 가지는 레진 모형 근관에 twisted file을 이용하여 근관 형성 시 adaptive movement (TFA군)와 continuous rotation movement (TFC군)의 두 가지 구동 방식 하에서 파일의 내구성을 비교하고, 각각의 모형 근관을 형성하는데 소요된 시간을 측정하였다. TF 파일을 사용할 때마다 치과용 현미경으로 TF의 날풀림(unwind) 또는 변형 및 파절 여부를 관찰하여 그때까지 TF로 형성한 모형 근관의 수를 기록하고, 사진을 촬영하였다. 또한 twisted file의 첨단(D0)에서 날풀림이 발생한 지점까지의 직선 거리를 측정했다. 실험 결과는 0.05의 유의수준에서 Mann-Whitney U test로 분석했다. 결과: 파일의 파절은 두 실험군 모두에서 발생하지 않았으며, TFC군은 TFA군에 비하여 날풀림이 발생하기 전까지 형성한 모형 근관의 수가 통계적으로 유의하게 적었으며, 모형 근관을 작업장까지 성형, 확대하는데 걸린 시간은 TFA군이 TFC군에 비해 유의하게 길었다. 날풀림이 발생한 지점의 위치는 TFC군과 TFA군 사이에 유의한 차이가 발견되지 않았다. 결론: Twisted file을 adaptive movement mode로 사용하여 근관을 형성하면 날풀림이 발생하기 전까지 확대할 수 있는 근관의 수가 증가했으나, 작업장까지 근관을 형성하는데 필요한 시간이 유의하게 증가했다. Adaptive movement와 continuous rotary movement 간에 기구의 날풀림이 발생하는 위치에는 유의한 차이가 발견되지 않았다.
대한치과보존학회 2008년도 Spring Scientific Meeting(the 129th) of Korean Academy if Conservative Dentistry
/
pp.204-212
/
2008
본 연구의 목적은 Resilon을 이용한 근관충전시 methacrylate-based root canal sealer와 자기-접착 레진시멘트의 사용에 따른 치근단 미세누출을 비교해 보는 것이다. 70개 단근치를 ProFile NiTi rotary instrument와 GG drill을 이용해 근관성형 하였다. 치근을 4개의 실험군 (n = 15)과 2개의 대조군 (n = 5)으로 분류하여 측방가압법으로 충전하였다 <1군: GP + AH-26, 2군: Resilon + RealSeal primer&sealant, 3군: Resilon + Rely-X Unicem, 4군: Resilon + Biscem> 7일간 1% 메틸렌블루 용액에 침적 후 수직절단하여 치근첨부터 색소의 침투도를 측정하였다. 1 군에서 가장 적은 미세누출값이 측정되었고, 2, 3, 4군간의 통계적 유의성은 없었다. 이번 연구의 결과에 따르면, 자가-접착 레진시멘트는 Resilon을 이용한 근관충전시 sealer로 사용이 가능하리라 생각된다.
본 연구의 목적은 Resilon을 이용한 근관충전시 methacrylate-based root canal sealer와 자가-접착 레진시멘트의 사용에 따른 치근단 미세누출을 비교해 보는 것이다. 70개 단근치를 ProFile NiTi rotary instrument와 GG drill을 이용해 근관성형 하였다. 치근을 4개의 실험군 (n = 15)과 2개의 대조군 (n = 5)으로 분류하여 측방가압법으로 충전하였다. <1군: GP + AH-26, 2군: Resilon + RealSeal primer&sealant, 3군: Resilon + Rely-X Unicem, 4군: Resilon + Biscem > 7일간 1% 메틸렌블루 용액에 침적 후 수직절단하여 치근첨부터 색소의 침투도를 측정하였다. 1군에서 가장 적은 미세누출값이 측정되었고, 2, 3, 4군 간의 통계적 유의성은 없었다. 이번 연구의 결과에 따르면, 자가-접착 레진시멘트는 Resilon을 이용한 근관충전시 sealer로 사용이 가능하리라 생각된다.
연구목적: 니켈-티타늄 금속을 근관치료기구에 도입함으로써 근관형성과정이 매우 단순화되었다. 그러나 이러한 새로운 기구는 단점도 함께 가지고 있는데 그 중 하나가 근관내로 기구가 빨려 들어가는 경향이다. 본 연구에서는 니켈-티타늄 전동파일의 경사도가 screw-in effect에 미치는 영향을 평가하고자 하였다. 연구 재료 및 방법: 총 20개의 S-자형 투명레진블록 (Dentsply-Maillefer) 근관에서 두 군으로 나누어 실험하였는데 Profile군에서는 0.02, 0.04 그리고 0.06 경사도의 Profile (Dentsply-Maillefer)과 0.08, 0.10 그리고 0.12의 경사도의 GT Rotary file (Dentsply-Maillefer)을 사용하였고 K3군에서는 같은 경사도의 K3 file SybronEndo)을 사용하였으며, 분당 300회전의 일정한 속도에서 단일 pecking 동작으로 기구조작을 하였다. 특수한 장치를 고안하였으며 장치내 dynamometer를 이용하여 screw-in effect를 측정하여 one-way ANOVA로 통계처리하고 Tuckey's multiple range test로 사후검정하였다. 결과: Profile 군에서는 큰 경사도의 기구가 더 큰 screw-in force를 나타내었고 (p < 0.05), K3군에서는 0.08, 0.10. 및 0.12 경사도의 기구가 0.04 경사도의 기구에 비해, 0.08 및 0.12 경사도의 기구가 0.06 경사도의 기구에 비해 더 큰 screw-in force를 나타내었다 (p < 0.05). 결론: 기구의 경사도가 클수록 screw-in force가 많이 발생하는 것으로 생각되며, 경사도가 큰 전동화일을 사용시에는 screw-in force를 억제하기 위해 더 많은 주의가 요구될 것으로 생각된다.
본 연구는 엔진 구동형 Ni-Ti 파일인 $ProTaper^{TM}$를 이용하여 좁고 만곡된 근관 형태를 가지는 레진 모형상에서 회전 속도를 변화시켰을 때 근관 형태 변화에 대해 비교 분석하기 위해 시행되었다. 16 mm의 작업장 길이를 갖는 40개의 기성품 레진 블록을 엔진 구동형 Ni-Ti파일인 $ProTaper^{TM}$를 사용하여 회전 속도를 제외하고 제조자의 지시에 따라 크라운다운법으로 근관 성형하였다. 연구에 사용된 회전 속도는 250 rpm, 300 rpm, 350 rpm, 400 rpm이었으며, 근첨부 성형은 #25 파일 크기인 F2로 시행하였다. 근관 성형 전 후 이미지를 스캐너를 이용하여 얻었고, Photoshop 7.0 프로그램을 이용하여 중첩하였다. 이미지 분석 프로그램을 이용하여 치근단 쪽에서부터 1, 2, 3, 4, 5, 6, 7 및 8 mm부위의 내 외측 폭경 변화와 총폭경 및 근관의 중심축에 대한 근관 변위를 측정하였다. 각 부위에서 내 외측 폭경과 총폭경 및 근관의 중심축에 대한 근관 변위의 유의성 검정을 위해 one-way ANOVA분석을 시행하였으며, 각 기구간의 유의성 검정은 Scheffe's test로 사후 분석하였다. 또한 근관 성형 시간 기구의 변형과 파절 여부를 평가하여 다음과 같은 결과를 얻었다. 1. 본 실험에 이용된 회전속도로 근관성형시 회전 속도와 관계없이 치근첨에서 2 mm부위까지는 만곡의 외측으로 변위되고, $3{\sim}6mm$부위에서는 만곡의 내측으로 변위 되었다. 근첨에서 5 mm와 6 mm 부위를 제외하고 근관의 중심축에 대한 근관 변위는 통계적으로 유의성이 없었다. 2. 350 rpm, 400 rpm의 경우 250 rpm, 300 rpm에 비해 더 짧은 시간이 걸렸다. (p<0.01). 이상의 결과는 엔진 구동형 Ni-Ti파일인 $ProTaper^{TM}$를 사용하여 $250{\sim}400rpm$의 회전속도로 근관 성형시 근관 형태를 잘 유지하며, 빠른 회전 속도로 성형시 작업 시간도 줄일 수 있지만, 속도가 빨라지면 파일의 파절이 일어날 수 있으므로 주의해야 함을 시사한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.