• 한국조경학회지
• /
• 제29권3호
• /
• pp.1-9
• /
• 2001

The purpose of this article is to study the design and construction of Anap pond with a comparative study of ancient palace ponds in Korea, China and Japan. Anap pond was excavated in 1975-6 and is the oldest orignal pond to be found among Koran garden sites. Anap pond was made just before Shilla drove out Tang, after Shilla ruined Paekjae and Koguryo with the Tang army. This was a time Shilla enjoyed a multi-cultural situation due to interaction with Paekjae and Koguryo refugees, as well as information provided by the ambassadors sent to Tang who were well aquainted with Tang culture. Anap pond shows the influence of not only the indigenous mountain-god myth, but also the theoretical background common among Korea, China and Japan. But it also depicts the special form of space inbued with the exquisite aesthetic taste of Shilla people, which started with Anap pond hardened in Gaen temple, and which bloomed in Sukgulam. Scenery structure analysis gives a supposition of the center building on the western coatland, and sequential analysis gives the feeling of being at sea, analysised by root square shape analysis, equal ratio square shape and golden section, sow we can see the planned space organization by speculated planning. Thus, Anap pond is a garden of Shilla in which the cultural exchange has been inculturated and made our own, and the special aesthetic taste embodied.

• Restorative Dentistry and Endodontics
• /
• 제27권4호
• /
• pp.421-431
• /
• 2002

C-shaped canal configuration is very difficult to treat because that clues about preoperative canal anatomy cannot be ascertained from clinical crown morphology and limited information can be derived from radiographic examination. This study was done to get more informations about the root and canal configuration of C-shape root by 3-dimensionally reconstructing for the purpose of enhancing success rate of endodontic treatment. 30 mandibular molars with C-shaped root were selected. Six photo images from occlusal, apical, mesial, distal, buccal, lingual directions and radiographic view were taken as preoperative ones to compare them with 3-D image. After crown reduction to the level of 1-2mm over pulpal floor was performed, teeth were stored in 5.25% sodium hypochlorite solution for the removal of pulp tissue and debris. They were cleaned under running water, allowed to bench dry and embedded in a self-curing resin. This resin block was serially ground with a microtome (Accutom-50, Struers, Denmark) and the image of each level was recorded by digital camera (FinePix S1-pro, Fuji Co., Japan). The thickness of each section was 0.25mm. Photographs of serial sections through all root canal were digitized using Adobe Photoshop 5.0 and then minimum thickness of open and closed sites were measured (open site is the surface containing occluso-apical groove closed site is oppsite). After dizitization using 3-D Doctor (Able software Corp, USA). 3D reconstruction of the outer surface of tooth and the inner surface of pulp space was made. Canal classsification of C-shaped roots was performed from this 3-D reconstructed image. The results were as follows : 1. Most C-shape rooted teeth showed lingual groove (28/30). 2 According to Vertuccis' calssification, type I, II, III, IV, VII were observed. but also new canal types suck as 2-3-2, 1-2-3-2. 2-3-2-1, 2-3-2-3 were shown. 3 There was little difference in minimum thickness on coronal and apical portions, but open site were thinner than closed site on mid portion. Conclusively, 3D reconstruction method could make the exact configurations of C-shape root possible to be visualized and analyzed from multi-directions. Data from minimum thickness recommend cleaning and shaping be more carefully done on dangerous mid portion.

• Ecology and Resilient Infrastructure
• /
• 제6권4호
• /
• pp.295-303
• /
• 2019

본 연구에서는 생태녹화용 유묘 생산에 적합한 재배용기를 선별하기 위하여 다양한 재배용기가 자작나무 유묘에 미치는 영향을 조사하였다. 실험에 사용한 용기는 일반용기, 일반용기 내부에 융기선 5 mm와 10 mm 설치, 일반용기 표면에 세로 절개홈 있는 배광성용기, 배광성용기 내부에 융기선 5 mm와 10 mm를 설치한 용기이었다. 재배용기에 따른 유묘생장 특성은 다음과 같다. 실험결과 온실 재배에서는 관수, 온도 등 관리도가 높아 수고, 가지수, 근원경 생장의 유의차가 없었으나, 뿌리생장은 유의차를 보이며 배광성용기에서 우수했다. 일반용기는 뿌리가 나선형의 비정상으로 자란 반면 배광성용기는 뿌리가 수직으로 자랐다. 노지이식 후 재배용기 처리에 따라 유의차를 보이며, 수고, 가지수, 근원경, 뿌리생장 모두 배광성용기에서 자란 유묘가 가장 우수한 것으로 나타났다. 배광성용기에서 자란 유묘의 경우 뿌리가 수직으로 생장해 노지 이식 후 뿌리활착 및 생장이 우수했으며, 용기내부에 설치한 융기선은 5 mm이내가 적정한 것으로 나타났다. 따라서 배광성용기를 사용한 생태녹화용 자작나무 유묘에서 수고, 가지수, 근원경 및 뿌리생장에 큰 효과를 보여 배광성용기가 유묘생산에 적합한 것으로 판단되었다.

• 대한본초학회지
• /
• 제22권3호
• /
• pp.9-14
• /
• 2007

Objectives : This research was observed by examining the external and internal parts and the quantity of the surface components of the wild type and cultivar of Angelica dahurica in korea. Methods : The slice of the tested material mede by paraffin section technique was colored with Safranine Malachite Green contrast methods, and then observed and photographed by the microscope and examined the quantity of the surface components. Results : In the shape of the roots, the wild type had a very thin main root and 2 long roots, while the cultivar had a long root branched out from the short and thick main root making a square pyramid shape. Isoimperatorin was detected at Rt $17{\sim}18$ minutes. The wild type contained 0.56% while the cultivar contained it of 0.355%, thus the component of the wild type was about 1.5 times of that of the cultivar. Conclusions : It was thought that there might be also some differences in their genetic characteristics, etc.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.608-608
• /
• 2003

The main objectives of root canal therapy are cleaning and shaping and then obturating the root canal system in 3 dimensions to prevent reinfection. Many instrumentation techniques and devices, supported by an irrigation system capable of removing pulp tissue remnants and dentin debris, have been proposed to shape root canals. But current regimens in chemomechanical debridement using instrumentation and irrigation with NaOCl are not predictably effective in root canal disinfection. These findings are not surprising because the root canal system is complex and contains numerous ramifications and anatomical irregularities. The microorganisms in root canals not only invade the anatomic irregularities of the root canal system but also are present in the dentinal tubules. Therefore further disinfection with an effective antimicrobial agent may be necessary and it well1mown that use of intracanal medication will lower bacterial count in infected root canals. Calcium hydroxide has a long history of use in endodontics, and more attention has been given to the use of calcium hydroxide as intracanal dressing for the treatment of infected pulp. However, when treatment is completed in one visit, no intracanal medications other than intracanal irrigants are used. Recently, a mixture of a tetracycline isomer, an acid, and a detergent(MTAD), has been introduced as a final rinse for disinfuction of the root canal system. It has been shown that MTAD is able to remove the smear layer with minimal erosive changes on the surface of dentin, and is effective against Enterococcus faecalis, a microorganism resistant to the action of other antimicrobial medications. In another study, the ability of MTAD was investigated to disinfect contaminated root canals with whole saliva and compared its efficacy to that of NaOCl Based on the results, it seems that MTAD is significantly more effective than 5.25% NaOCl in eradicating bacteria from infected root canals. In the cytotoxicity evaluation, MTAD is less cytotoxic than engenol, 3% $H20_2,\;Ca(OH)_2$ paste, 5.25% NaGCl, Peridex, and EDTA and more cytotoxic than 2.63%,1.31% and 0.66% NaOCl. Is it promising or transient?

• Wind and Structures
• /
• 제16권3호
• /
• pp.241-248
• /
• 2013

The wind turbine blade is a very important part of the rotor. Extraction of energy from wind depends on the design of blade. In this work, the analysis is done on a blade of length 38.95 m which is designed for V82-1.65 MW horizontal axis wind turbine (supplied by Vestas). The airfoil taken for the blade is NACA 634-221 which is same from root to tip. The analysis of designed blade is done in flap-wise loading. Two shapes of the spar are taken, one of them is of square shape and the other one is combination of square and cross shape. The blade and spar are of the same composite material. The Finite element analysis of designed blade is done in ANSYS. This work is focused on the two segments of blade, root segment and transition segment. Result obtained from ANSYS is compared with the experimental work.

• Journal of Ginseng Research
• /
• 제8권2호
• /
• pp.114-123
• /
• 1984

This study was conducted to investigated the morphology and distribution of starch granule in ginseng root. The results obtained are as follows; The starch contents of main and lateral ginseng 1$.$cot were 23-32% and 14-16%, respectively, and it was varied significantly with growing season, namely 15-37% in Summer (May to August) and 3-6% in Winter (November to March). Thus the starch content of ginseng root was different depending on the portien of ginseng root and growing seasons, but a significant difference was not observed by a growing period of ginseng. The starch granules showed nearly round or oval shape having the diameter 2-8${\mu}$ and their size were increased with a growing period of ginseng. The crystalline structure of starch granules was found to be B-type by X-ray diffraction study.

• 소성∙가공
• /
• 제21권8호
• /
• pp.479-484
• /
• 2012

The objective of this study is to compensate the elastic recovery in the flexible forming process using the predictive models. The target shape was limited to two-dimensional shape having only one curvature radius in the longitudinal-direction. In order to predict the shape error the regression and neural network models were established based on the finite element (FE) simulations. A series of simulations were conducted considering input variables such as the elastic pad thickness, the thickness of plate, and the objective curvature radius. Then, at sampling points in the longitudinal-direction, the shape errors between formed and objective shapes could be calculated from the FE simulations as an output variable. These shape errors were expressed to a representative error value by the root mean square error (RMSE). To obtain the correct objective shape the die shape was adjusted by the closed-loop using the neural network model since the neural network model shows a higher capability of estimating the shape error than the regression model. Finally the experimental result shows that the formed shape almost agreed with the objective shape.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 춘계학술대회
• /
• pp.259-259
• /
• 2001

;A new root canal instrument and instrumentation technique: a preliminary report. Cleaning and shaping the root canal system has been and continues to be a challenge for even the most experienced endodontist. Curved. narrow canals. in particular. cause difficulties for the beginner as well as the specialist. A new instrument designed to incorporate new concepts was developed to ameliorate the problems in cleaning and shaping root canal systems. This new instrument has been given the name of SW (Senia and Wildey). The new SW instrument uses controlled right and left rotational forces. This motion was used to clean and shape simulated root canals in plastic blocks and root canals in extracted teeth. Instrumentation appeared to be easier. faster. and more precise than with conventional instruments. especially in curved canals where there was remarkable reduction of canal transportation. A mechanical version of the SW instrument was also developed. It was used to flare the coronal portion of the root canal system. Wildey WL. Senia ES., Oral Surg Oral Med Oral Pathol1989 Feb:67(2):198-207 Another look at root canal instrumentation. Several aspects of root canal instrumentation need additional research. Various factors must be considered in an analysis of instrumentation of the root canal system: the dentin that is cut: the technique used to cut it: the design of the instruments: the material and manufacturing process used to make the instruments: the irrigant used during the procedure: and the anatomic configuration of the root canal system. An analysis of these factors clearly indicates that existing root canal instruments and techniques are less than ideal and. in fact. do not accomplish what is expected of them. Root canals must be properly. but. at the same time. destructive and unnecessary removal of dentin should be kept to a minimum. The Flex-R and Canal Master instruments were developed to address some of the shortcomings of existing instruments and techniques. More scientifically based research is needed to fully evaluate these new instruments and techniques and to develop future instruments. Wildey WL; Senia ES. Montgomery S., Oral Surg Oral Med Oral Pathol1992 Oct:74(4):499-50799-507

• 소성∙가공
• /
• 제29권5호
• /
• pp.282-289
• /
• 2020

Flexible roll forming is an advanced sheet-metal-forming process that allows the production of parts with various cross-sections. During the flexible process, material is subjected to three-dimensional deformation such as transverse bending, inhomogeneous elongations, or contraction. Because of the effects of process variables on the quality of the roll-formed products, the approaches used to investigate the roll-forming process have been largely dependent on experience and trial- and-error methods. Web-warping is one of the major shape defects encountered in flexible roll forming. In this study, an SVR model was developed to predict the web-warping during the flexible roll forming process. In the development of the SVR model, three process parameters, namely the forming-roll speed condition, leveling-roll height, and bend angle were considered as the model inputs, and the web-warping height was used as the response variable for three blank shapes; rectangular, concave, and convex shape. MATLAB software was used to train the SVR model and optimize three hyperparameters (λ, ε, and γ). To evaluate the SVR model performance, the statistical analysis was carried out based on the three indicators: the root-mean-square error, mean absolute error, and relative root-mean-square error.