• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.197-202
• /
• 2008

In this paper, a hybrid vibration-impedance approaches is newly proposed to detect the occurrence of damage, the location of damage, and extent of damage in steel plate-girder bridges. The hybrid scheme mainly consists of three sequential phases: 1) to alarm the occurrence of damage, 2) to classify the alarmed damage, and 3) to estimate the classified damage in detail. Damage types of interest include flexural stiffness-loss in girder and bolts-loose in supports. In the first phase, the global occurrence of damage is alarmed by monitoring changes in acceleration features. In the second phase, the alarmed damage is classified into subsystems by recognizing patterns of impedance features. In the final phase, the location and the extent of damage are estimated by using modal strain energy-based damage index method and root mean square deviation method. The feasibility of the proposed system is evaluated on a laboratory-scaled steel plate-girder bridge model for which hybrid vibration-impedance signatures were measured for several damage scenarios.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.141-148
• /
• 2009

The purpose of this paper is to propose a standard test methods of resistance to root penetration for waterproofing and rootproofing membrane using green roof system. Green roof system is considered to be an important subject in construction industry for green growth project. At the same time, we have to consider the counterplan for protection the damage of waterproofing layer and concrete substrate from the penetration of plant root. But many kinds of materials for protection from root penetration are using in construction field. But the performance of those materials is not clear, and there is not test methods for the evaluation of performance. So in this paper, based on the research results of 4 institutes during four years and foreign cases, we made a standard test methods of resistance to root penetration for waterproofing and rootproofing membrane using green roof system. This test method deals with about environmental condition of laboratory, experimental facilities, kinds of plant, specimen of test, management methods, evaluation duration and documents, etc.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.2
• /
• pp.75-82
• /
• 2010

Gas turbines for power generating operate in a very high temperature condition and use natural gas for fuel. For this reason, many cases of damage happen at hot gas parts which are severely affected by high temperature gas and many cases of explosion occur by fuel gas. So a lot of efforts should be made to prevent hot gas parts damage and gas explosion accidents. Though there are many damage cases and explosion accidents, it is very difficult to find out the root causes of hot gas parts damage caused by gas explosion due to gas leakage in the heat exchanger for air cooling and gas heating. To prevent gas turbine from damage caused by gas explosion, removal of leakage gas from gas turbine is inevitably required before firing the gas turbine and installing alarm systems is also required for detecting gas leakage at stop valve to turbine while shut down.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.3
• /
• pp.183-189
• /
• 2021

We checked the emergence rate and early growth characteristics of young rice plants according to the germination length and seed damage ratio in direct seeding. The emergence rate was reduced according to the longer germination length and higher seed damage ratio. The emergence rate was further reduced under high-temperature conditions. The leaf number did not show a significant difference according to germination length and seed damage ratio. However, shoot and root dry weights were reduced according to the germination length and seed damage ratio. The root dry weight was highly correlated with the shoot dry weight. Based on these results, we concluded that a longer germination length and seed damage could induce the loss of nutrients and affect poor root growth, consequently inducing poor emergence and growth in the early growth stage of rice seeds. Therefore, in rice direct seeding, seed conditions of less than 1 mm of germination length should be checked for a sufficiently high standing rate and adequate growth characteristics after seeding.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.240-247
• /
• 2006

Piezoelectric sensor-based health monitoring technique using a two-step support vector machine (SYM) classifier is discussed for damage identification of a railroad track. An active sensing system composed of two PZT patches was investigated in conjunction with both impedance and guided wave propagation methods to detect two kinds of damage of the railroad track (one is a hole damage of 0.5cm in diameter at web section and the other is a transverse cut damage of 7.5cm in length and 0.5cm in depth at head section). Two damage-sensitive features were extracted one by one from each method; a) feature I: root mean square deviations (RMSD) of impedance signatures and b) feature II: wavelet coefficients for $A_0$ mode of guided waves. By defining damage indices from those damage-sensitive features, a two-dimensional damage feature (2-D DF) space was made. In order to minimize a false-positive indication of the current active sensing system, a two-step SYM classifier was applied to the 2-D DF space. As a result, optimal separable hyper-planes were successfully established by the two-step SYM classifier: Damage detection was accomplished by the first step-SYM, and damage classification was also carried out by the second step-SYM. Finally, the applicability of the proposed two-step SYM classifier has been verified by thirty test patterns.

• Wind and Structures
• /
• v.16 no.3
• /
• pp.263-278
• /
• 2013

The fatigue load of a turbine blade has become more important because the size of commercial wind turbines has increased dramatically in the past 30 years. The reduction of the fatigue load can result in an increase in operational efficiency. This paper numerically investigates the load reduction of large wind turbine blades using active aerodynamic load control devices, namely trailing edge flaps. The PD and LQG controllers are used to determine the trailing edge flap angle; the difference between the root bending moment and its mean value during turbulent wind conditions is used as the error signal of the controllers. By numerically analyzing the effect of the trailing edge flaps on the wind turbines, a reduction of 30-50% in the standard deviation of the root bending moment was achieved. This result implies a reduction in the fatigue damage on the wind turbines, which allows the turbine blade lengths to be increased without exceeding the designed fatigue damage limit.

• Korean Journal of Environmental Agriculture
• /
• v.1 no.2
• /
• pp.99-104
• /
• 1982

These studies were carried out to investigate the damage of root rot of hop by heptachlor residues in soil at nine farm fields and pot experiment for two years from 1980 to 1981. 1) Pot experiment results indicated that root rot of hop occurred in farm field were caused by heptachlor phytotoxicity. 2) The damage of root rot of the hop was found by heptachlor residues in soil. Hop root in the low concentration of heptachlor was turned to brown mottle, and then rotted. In high concentration, the hop root was decreased in number, blocked in growth, and resulted to greyish change with death. 3) Hop vine damaged by heptachlor was hardened and broken with ease. 4) Heptachlor epoxide which was inferred to be the main cause of hop root rot gave the damage to hop at 0.009 ppm reisdues in soil. 5) The phytotoxicity of heptachlor was proved to last for 10 years or more in this study.

• Restorative Dentistry and Endodontics
• /
• v.37 no.4
• /
• pp.228-231
• /
• 2012

Invasive cervical resorption is a relatively uncommon form of external root resorption. It is characterized by invasion of cervical region of the root by fibrovascular tissue derived from the periodontal ligament. This case presents an invasive cervical resorption occurring in maxillary lateral incisor, following damage in cervical cementum from avulsion and intracoronal bleaching procedure. Flap reflection, debridement and restoration with glass ionomer cement were performed in an attempt to repair the defect. But after 2 mon, more resorption extended apically. Considering root stability and recurrence potential, we decided to extract the tooth. Invasive cervical resorption in advanced stages may present great challenges for clinicians. Therefore, prevention and early detection must be stressed when dealing with patients presenting history of potential predisposing factors.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.4
• /
• pp.968-974
• /
• 1996

Intra-alveolar transverse crown & root fx. provokes many problems in treatment. Conventionally, extraction of the injured tooth and its prosthodontic restoration has been the treatment of choice. Though orthodontic extrusion could be an alternative treatment, there would be a situation it's inadequate to apply. Loss of natural tooth would be a psychological damage to the patient, of course. This report describes a replantation method of tooth in case of intra-alveolar transverse crown & root fracture. The fractured tooth was extracted, rotated, then replanted. Fixation and esthetic restoration was done. And then endodontic treatment was followed. Continuing follow-up of its function and endodontic status is required.

• The Journal of the Korean dental association
• /
• v.52 no.2
• /
• pp.85-95
• /
• 2014

Completely avulsed tooth caused by a traumatic injury needs replantation for treatment choice. But, replantated tooth usually comes with inflammatory root resorption, replacement resorption and ankylosis, moreover ankylosis cause severe functional and esthetic problems. The outcome of replantated tooth depends on the following factors; minimal damage to pulp and periodontal tissue, the length of extraoral time, the medium of the tooth stored, the level of root formation and so on. The purpose of this case report is to describe the variable resorption pattern and to discuss types that influence the occurrence of resorption.