• 식물병연구
• /
• 제29권4호
• /
• pp.459-463
• /
• 2023

정서적 안정과 휴식에 효과적이며, 공기 정화 등 기능성을 가진 관엽식물에 대한 수요가 증가하고 있으나, 관엽식물에 피해를 유발할 수 있는 식물기생선충에 대한 연구는 전무한 실정이다. 본 연구는 국내 판매되고 있는 관엽식물에서 발생하는 식물기생선충의 검출 여부와 밀도를 파악하고자 관엽식물과 작물재배지에 대해 2022년 7월부터 12월까지 모니터링을 수행하였다. 415개의 관엽식물과 국내 24개 차나무 및 22개 감귤재배지의 식물기생선충을 조사하였다. 관엽식물 내 식물기생선충 조사 결과, 뿌리썩이선충이 가장 많이 검출되었으며, 잎선충, 뿌리혹선충, 침선충이 확인되었다. 차나무재배지에서는 나선선충, 씨스트선충, 뿌리혹선충, 뿌리썩이선충이 검출되었고, 감귤재배지에서는 감귤선충, 주름선충, 뿌리썩이선충, 뿌리혹선충 등이 검출되었다. 관엽식물, 차나무 및 감귤 재배지에서 뿌리썩이선충이 가장 우려되는 식물기생선충이었으나, 뿌리혹선충, 씨스트선충이 일부 검출되어 피해가 우려되므로 온탕침법, 유기농업자재의 사용, 잡초제거 등 식물기생선충의 방제 방법을 재배에 적용하여야 할 것이다.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.42-48
• /
• 2012

Due to increase in demand of stable and long pipelines in natural gas industry, wide range of researches are being performed on automation welding to improved welding quality with respect to weld process parameters in real time measurement. In particular, the coupling between the pipe manufacturing process and location of the weld seam, the measured size of the gap that exists in the weld position and the weld angle depending on whether the movement of molten weld. This is due to absence of controlling welding penetration position, depending on the required size of the angle of the setting. In addition, the optimum welding conditions must be considered while selecting, the correlation between these variables and the systematic correlation has not yet been identified. Therefore, in most welded pipe root-pass weld solely depends on the experience of workers in relation to secure a stable weld quality. In this study, automation welding system is implemented to select a suitable root-pass STT (Surface Tension Transfer) welding method using the optimal welding conditions. To successfully accomplish this objective, there were various welding conditions used for welding experiment to confirm that the assessment required for construction through the pipe and automatic welding process is proposed to optimize this plan.

• Journal of Plant Biotechnology
• /
• 제44권2호
• /
• pp.164-170
• /
• 2017

A rapid and efficient in vitro regeneration system was established for Hibiscus syriacus L. The successful regeneration protocol employs induction of shoot organogenesis on leaf, petiole, and root explants. Among the various plant growth regulators evaluated, thidiazuron (TDZ) was the most effective for inducing rapid shoot formation. Most efficient shoot regeneration frequency was obtained from Murashige and Skoog (MS) media containing 0.01 mg/L TDZ. Regeneration efficiency was highest in the roots, and lowest in the leaves. A combination of 0.01 mg/L TDZ with benzyladenine (BAP) markedly improved the frequency of shoot differentiation from the root (up to 98%) and petiole (up to 88%) explants. Furthermore, leaf and petiole explants showed the highest frequency of shoot induction in half-strength MS media containing 0.01 mg/L TDZ and 1.0 mg/L BAP, while root explants formed the greatest number of shoots when 0.01 mg/L TDZ and 0.1 mg/L BAP were added to half-strength MS media. Although the frequency of shoot differentiation from leaf explants was only 50%, the leaf is considered the most efficient plant organ for use in tissue culture because leaves are easier to obtain than roots and petioles. Our findings show that various organs of H. syriacus can be used for plant regeneration, and the protocol developed in this study may be applicable in the horticulture industry.

• Food Science and Biotechnology
• /
• 제16권2호
• /
• pp.238-242
• /
• 2007

Square root models were developed for predicting the kinetics of growth of Listeria monocytogenes in sesame leaves as a function of temperature (4, 10, or $25^{\circ}C$). At these storage temperatures, the primary growth curves fit well ($R^2=0.898$ to 0.980) to a Gompertz equation to obtain lag time (LT) and specific growth rate (SGR). The square root models for natural logarithm transformations of the LT and SGR as a function of temperature were obtained by SAS's regression analysis. As storage temperature ($4-25^{\circ}C$) decreased, LT increased and SGR decreased, respectively. Square root models were identified as appropriate secondary models for LT and SGR on the basis of most statistical indices such as coefficient determination ($R^2=0.961$ for LT, 0.988 for SGR), mean square error (MSE=0.l97 for LT, 0.005 for SGR), and accuracy factor ($A_f=1.356$ for LT, 1.251 for SGR) although the model for LT was partially not appropriate as a secondary model due to the high value of bias factor ($B_f=1.572$). In general, our secondary model supported predictions of the effects of temperature on both LT and SGR for L. monocytogenes in sesame leaves.

• Journal of Applied Biological Chemistry
• /
• 제59권1호
• /
• pp.13-17
• /
• 2016

천연물을 이용한 산업이 증가됨에 따라 전통약재식물들의 화장품소재로 사용하려는 관심이 높아지고 있다. 다양한 약재식물 중 딱지꽃(Potentilla chinensis) 역시도 다양한 약리 활성이 알려짐에 따라 관심이 높아지고 있다. 그러나 다양한 약리활성을 지닌 반면 딱지꽃(Potentilla chinensis) 을 이용한 산업적 응용은 거의 이루어지지 않고 있다. 본 연구에서는 화장품소재로서의 딱지꽃 뿌리 추출물에 관현 연구를 수행하였다. 그 이유는 딱지꽃의 뿌리 부분이 다른 부분보다 더 많은 약리활성을 지녔다는 보고들이 있었기 때문이다. 딱지꽃 뿌리 추출물을 얻어낸 뒤 항염증, 주름개선, 보습 그리고 미백 효과를 확인함에 따라 딱지꽃 뿌리 추출물을 화장품 소재로 응용가능한지 확인하였다. 그 결과 elastin과 aquaporin-3 증가 효과를 확인할 수 있었고, cyclooxygenase-2, metallopeptidase-1 그리고 melanin 합성 억제효과를 확인할 수 있었다.

• 한국자원식물학회지
• /
• 제22권5호
• /
• pp.454-460
• /
• 2009

본 실험은 여우구슬의 기내 부정근 유도 및 증식조건의 확립을 목적으로 수행되었다. 우선 여우구슬의 기내 발아체로부터 부위를 달리하여 부정근을 유도한 결과 줄기부위는 뿌리보다 양호한 부정근의 유도를 보였다. 또한 유도된 부정근을 이용하여 옥신의 종류(IAA, IBA, NAA와 2.4-D)에 따른 부정근 유도율을 조사한 결과 IBA와 NAA는 IAA와 2.4-D보다 높은 유도율을 보였다. IBA의 농도에 따른 유도율과 증식효율은 IBA가 0.5 mg/L첨가되었을 때 가장 높은 유도 및 증식효율을 보였다. 최적의 액체배지조건을 확인하고자 IBA의 농도는 0.5 mg/L로 첨가하고 sucrose의 농도를 달리하여 실험한 결과 sucrose는 30 g/L 첨가 되었을 때 가장 높은 생중량과 건중량을 나타냈다. 액체배양된 여우구슬의 부정근을 각각 MS, 1/2MS, 1/3MS배지에 30 g/L sucrose, 0.5 mg/L IBA가 첨가된 5 L 용량의 생물반응기에 4주간 배양한 결과 1/2MS 배지에서 양호한 생장을 보였다. 본 실험에서는 여우구슬의 종자발아체를 이용하여 부정근의 유도 및 증식조건에 필요한 기내배양조건과 2차적으로 유도된 부정근을 이용하여 플라스크와 생물반응기 배양을 통한 효율적인 증식조건을 확립하였다.

• 농업과학연구
• /
• 제33권1호
• /
• pp.43-56
• /
• 2006

In this thesis we aim at analyzing international competitive power of Chinese ginseng in comparison with Korean ginseng and searching policy direction for Korea to compete Chinese ginseng industry. We summarized the research results as follows; First, we examine the structural change of ginseng industry of China. Second, we review the theories for international competitiveness and apply the method of analyzing competitiveness to ginseng industry. Third, we compared the international competitive power of the ginseng industry between China and Korea and found that Chinese ginseng, estimated by Revealed Comparative Advantage(RCA) at about 15, still remains high competitiveness in terms of cost and price but lowering price competitiveness recently. Based on the research results, we suggest export promotion strategies of the Korean ginseng as follows; 1) Korean government should enforce trade cooperation with China so as to register Korean root ginseng an importable medicine. 2) Korean ginseng producer should develop various products such as capsules, powders and etc. according to China's consumer purchasing power and taste. 3) Korean ginseng should be sold as an differentiated commodity so that it will contribute to building consumer loyalty to Korean ginseng, makes market share superior to other cheaper ginseng products in China. 4) In order to be effective brand marketing and product advertisement, there should be established reliable networks to process and distribute Korean ginseng products exclusively.

• The Journal of Asian Finance, Economics and Business
• /
• 제5권2호
• /
• pp.15-24
• /
• 2018

The study examines the magnitude of economic spillover and the impact of foreign direct investment (FDI) inflows on the efficiency of the bank industry in China. This study employs unit root tests, cointegration tests and cointegrating regression analysis, including fully modified ordinary least squares (FMOLS), canonical cointegrating regression (CCR) and dynamic OLS (DOLS) to test the proposed hypotheses. The sample is restricted to the period of time in which monthly data is available and comparable among variables for the period from January 2002 to October 2013 (142 observations). All of the time series data was collected and retrieved from the People's Bank of China, China Monthly Statistics from the National Bureau of Statistics of China, and International Financial Statistics database from International Monetary Fund. The results of the Johansen cointegration test suggest that there is a long-run equilibrium relationship between FDI inflows, foreign exchange rate and banks performance in China. The results of cointegrating regression analysis using FMOLS, CCR and DOLS suggest that M2 supply and FDI inflows are significant at the 0.01 level. The results confirm that FDI inflows in the banking sector are positively related to the increase of banks productivity and performance and short-term loans in China. However, the results suggest that Chinese Yuan currency exchange rate to U.S. dollar is not significant in the banking and financial industry of China.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권3호
• /
• pp.451-462
• /
• 2015

Safety is the first priority in civil aviation, and so the International Civil Aviation Organization (ICAO) has introduced and mandated the use of Safety Management Systems (SMS) by airlines, airports, air traffic services, aircraft maintenance organizations, and training organizations. The aircraft manufacturing industry is the last for which ICAO has mandated the implementation of SMS. Since SMS is a somewhat newer approach for most manufacturers in the aviation industry, they hardly believe in the value of implementing SMS. The management of safety risk characteristics that occur during early aircraft development stages and the systematic linkage that the safety risk has to do with an aircraft in service could have a significant influence on the safe operation and life cycle of the aircraft. This paper conducts a case analysis of the McDonnell Douglas MD-11 accident/incident to identify the root causes and safety risk levels, and also verified why aircraft manufacturing industry should begin to adopt SMS in order to prevent aircraft accident.

• 아태비즈니스연구
• /
• 제11권2호
• /
• pp.27-43
• /
• 2020

Purpose - This study explores the impact of the real estate industry on related industries for the perspective of Chinese steel companies. Design/methodology/approach - The impact of housing prices on the 41 listed steel companies' performance was analyzed by using the panel data model. We used two kinds of housing price indexes that are set in the panel data models to estimate the range of the real estate market, driving the performance growth of steel listed companies. Moreover, the net profit of steel companies is used as the dependent variable. To test the stability of the model, ROA used as a dependent variable for the robustness test. Also, to avoid the time trend of housing prices, this paper selects the growth rate of housing prices as the primary research variable. After Fisher-type testings, there is no unit root problem in both independent and dependent variables. Findings - The results indicated that the rise in the housing price has a positive influence on the steel company performance. When the housing price increases by 1%, the net profit of steel enterprises will increase by 5 to 20 million yuan. Research implications or Originality - In this paper, empirical data at the micro-level and panel model are used to quantify China's real estate industry's driving effect on the iron and steel industry, providing evidence from the microdata level. It helps us to understand further the status and role of China's real estate industry in the economic structure.