• Tuberculosis and Respiratory Diseases
• /
• 제63권6호
• /
• pp.526-530
• /
• 2007

중증급성호흡곤란증후군으로 전원 된 41세 여자환자를 기존의 기계환기 방법으로 치료했으나 저산소증이 호전되지 않아 내원 후 3시간 내에 신속한 체외생명보조를 시행하여 성공적으로 치료한 예를 경험하여 문헌고찰과 함께 보고하는 바이다.

• 설비공학논문집
• /
• 제17권4호
• /
• pp.386-395
• /
• 2005

With the development of a living standard, the importance of indoor air conditioning system in all kinds of buildings and vehicles has increased. A lot of researches on energy losses in a duct and various kinds of flow pattern in branches or junctions have been carried out over many years, because the primary object of a duct system used in HVAC is to provide equal flow rate in the interior of each room by minimizing pressure drop. In this study, to get equal flow distribution in each branch, a blockage is applied to the rectangular duct system. The flow analysis for flow distribution of a rectangular duct with two branches was performed by CFD. By using SIMPLE algorithm and finite volume method, flow analysis is performed in the case of 3-D, incompressible, turbulent flow. Also, the standard $k-{\varepsilon}$ model and wall function method were used for analysis of turbulent fluid flow. The distribution diagrams of static pressure, velocity vector, turbulent energy and kinetic energy in accordance with variation of Reynolds number and blockages location in a rectangular duct show that flow distribution at duct outlets is improved by a blockage. In this rectangular duct system, mean velocity and flow rate distribution in two branch outlets are nearly constant regardless of variation of Reynolds number, and a flow pattern of the internal duct has a same tendency as well.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.2974-2978
• /
• 2014

$Mn_3O_4$/multi-walled carbon nanotube (MWCNT) composites are prepared by chemically synthesizing $Mn_3O_4$ nanoparticles on a MWCNT film at room temperature. Structural and morphological characterization has been carried out using X-ray diffraction (XRD) and scanning and transmission electron microscopies (SEM and TEM). These reveal that polycrystalline $Mn_3O_4$ nanoparticles, with sizes of about 10-20 nm, aggregate to form larger nanoparticles (50-200 nm), and the $Mn_3O_4$ nanoparticles are attached inhomogeneously on MWCNTs. The electrochemical behavior of the composites is analyzed by cyclic voltammetry experiment. The $Mn_3O_4$/MWCNT composite exhibits a specific capacitance of $257Fg^{-1}$ at a scan rate of $5mVs^{-1}$, which is about 3.5 times higher than that of the pure $Mn_3O_4$. Cycle-life tests show that the specific capacitance of the $Mn_3O_4$/MWCNT composite is stable up to 1000 cycles with about 85% capacitance retention, which is better than the pure $Mn_3O_4$ electrode. The improved supercapacitive performance of the $Mn_3O_4$/MWCNT composite electrode can be attributed to the synergistic effects of the $Mn_3O_4$ nanoparticles and the MWCNTs, which arises not only from the combination of pseudocapacitance from $Mn_3O_4$ nanoparticles and electric double layer capacitance from the MWCNTs but also from the increased surface area, pore volume and conducting property of the MWCNT network.

• Journal of Welding and Joining
• /
• 제15권6호
• /
• pp.96-104
• /
• 1997

The present study was aimed to correlate the microstructure and the hardness as well as the wear resistance of the metal-ceramic particulated composite layer on the pure Al plate. The composite layers were constructed by the addition of TiC particles on the surface of Al-Cu alloyed layers by PTA overlaying process. Initially, the Al-Cu alloyed layers were achieved by the deposition of Al-(25 ~ 48%) Cu alloys on the pure Al plate by TIG process. It was revealed that TiC particles were uniformly dispersed without any reaction with matrix in the composite layer. The volume fraction of TiC particles (TiC V F) increased from 12% to 55% with increasing the number of pass of composite layer. Hardnesses of (Al-48%Cu + TiC (3&4layers)) composite layer were Hv450 and Hv560, respectively, due to the increase of TiC V/F. Hardnesses of (Al-Cu + TiC) composite layers decreased gradually with insreasing temperature from 100$^{\circ}$C to 400$^{\circ}$C, and hardnesses at 400$^{\circ}$C were then reached to 1/5 - 1/10 of room temperature hardness depending on the construction of composite layers. The Specific wear of (Al + Tic) layer and Al-48%Cu alloyed layer decreased to 1/10 of the of pure Al, while the specific wear of (Al-48%Cu + TiC (4 layers)) composite layer exhibited 1/15 of that of steel such as SS400 and STS304.

• 한국재료학회지
• /
• 제27권4호
• /
• pp.184-191
• /
• 2017

This present study deals with the effect of micro-alloying elements and transformation temperature on the correlation of microstructure and tensile properties of low-carbon steels with ferrite-pearlite microstructure. Six kinds of low-carbon steel specimens were fabricated by adding micro-alloying elements of Nb, Ti and V, and by varying isothermal transformation temperature. Ferrite grain size of the specimens containing mirco-alloying elements was smaller than that of the Base specimens because of pinning effect by the precipitates of carbonitrides at austenite grain boundaries. The pearlite interlamellar spacing and cementite thickness decreased with decreasing transformation temperature, while the pearlite volume fraction was hardly affected by micro-alloying elements and transformation temperature. The room-temperature tensile test results showed that the yield strength increased mostly with decreasing ferrite grain size and elongation was slightly improved as the ferrite grain size and pearlite interlamellar spacing decreased. All the specimens exhibited a discontinuous yielding behavior and the yield point elongation of the Nb4 and TiNbV specimens containing micro-alloying elements was larger than that of the Base specimens, presumably due to repetitive pinning and release of dislocation by the fine precipitates of carbonitrides.

• 한국자기학회지
• /
• 제4권4호
• /
• pp.335-339
• /
• 1994

$Eu(Fe_{1-x}In_{x})O_{3}$ (x=0, 0.03과 0.05)의 결정구조와 자기적 성질을 상온에서의 X선 회절, $M\"{o}ssbauer$ 분광학 및 자기이력곡선 측정 방법에 의해서 연구하였다. X선 회절 분석 결과는 모든 시료가 orthorhombic 결정구조를 가지며, 단위포의 체적은 x=0을 제외하면 In 농도의 증가에 따라 증가함을 보인다. $M\"{o}ssbauer$ 스펙트럼은 두셋트 여섯 lines을 갖는다는 가정하에 분석하였다. 분석 결과는 각 셋트에서의 초미세 자기장은 x의 증가에 따라 감소하였다. 본 연구의 시료에서 공명 흡수선의 반폭이 x의 증 가에 따라 증가함은, 측정 data가 $Fe^{3+}$ 이온 주위 z개의 $In^{3+}$ 이온이 존재할 확률 분포, $_{n}P_{z}(x)$에 비례하는 초미세 구조에 의한 흡수선의 합으로 이루어졌음을 의미한다. 자기이력 곡선에서 $M_{s}$와 $H_{c}$는 각각 X의 증가에 따라 감소와 증가를 보인다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.461-461
• /
• 2013

Over the last decade, zinc oxide (ZnO) thin films have attracted considerable attention owing to large band gap of 3.37 eV and large exciton binding energy of 60 meV at room temperature [1-3]. Recent interest in ZnO related researches has been switched into the fabrication and characterization of low-dimensional nanostructures, such as nano-wires and nano-dots that can be applicable to manufacture the optoelectronic devices such as ultraviolet lasers, light-emitting-diodes and detectors. Since the optical properties of ZnO nano-structures might be distinct from those of bulk materials or thin films, the low-dimensional phenomena should be examined further. In order to utilize such advanced optoelectronic devices, one of the challenges is how to control the surface state related emissions that are drastically increased with increasing the density of the nano-structures and the surface-to-volume ratio. This paper reports the synthesis and characterization of self-assembled ZnO hexagonal nano-disks grown by radio-frequency magnetron sputtering. X-ray diffraction data and scanning electron microscopy data showed that ZnO hexagonal nano-disks were nucleated on top of the flat surfaces as the film thickness reached to 1.56 ${\mu}m$ and then the number of nano-disks increased with increasing the film thickness. The lateral size of hexagonal nano-disks was ~720 nm and height was ~74 nm. The strong photo luminescence spectra obtained at 10 K was also observed, which was assigned to a surface exciton emission at 3.3628 eV arising from the surface sites of hexagonal nano-disks.

• 미생물학회지
• /
• 제27권1호
• /
• pp.48-55
• /
• 1989

HA 비드에 부착한 S. sanguis 세포는 방사능 측정시 칵테일 속에서 비드에 여전히 부착되어 있음으로 비드에 의한 방사능의 sel-absorpiton이 일어났으며 그 정도는 염산용액으로 비드를 용해시킬 때 측정한 반사능값의 34.5% 이었다. 현탁액으로 준비한 세포의 방사능 측정과는 달리 HA 또는 SHA에 부착한 세포의 경우에는 소량의 scintillation 용액(2.5ml) 사용에서 더 좋은 측정값을 얻었다 . HA 비드에 의한 칭은 약 18% 이었다. 부착 assay 에 사용할 HA 비드 준비에 보통 이용되는 3가지의 dqkdqjqdm 비교에서는 차이가 없었다. 부착실험용의 세균세포는 초소리파로 세균사슬을 끊었는데 30초간의 파절로 세포하나 또는 두개로 주로 구성된 현탁액을 얻을 수 있었다. 본 연구에서는 HA 비드에 부착한 S. sanguis 세포를 측정할 때 self-absorpiton이 일어남을 발견하였고 부착한 세균을 비드에서 탈락하거나 또는 비드를 용해시킨 후 측정함으로써 self-absorption을 제거할 수 있었다. 그리고 부착한 세균의 방사능 측정에서는, 적정의 칵테일량을 발견하여 사용하므로 측정값을 유의하게 증가시킬 수 있었다. 수 있었다.

• 유기물자원화
• /
• 제26권1호
• /
• pp.39-45
• /
• 2018

FA(Fly ash)에 대해서는 연구가 활발히 진행되는 반면 BA(Bottom ash)의 연구실적은 많지 않으며, 특히 BA 재활용 분야의 연구가 절실히 요구된다. 따라서 본 연구에서 다공성인 건식(공랭식) BA를 연구대상으로 선택해 이를 재료로 활용하여 만든 BA 모르터와 일반 모르터를 비교 분석하여 BA 모르터의 경량 및 단열 특성을 알아보고자 하였다. BA의 경량성을 알아보기 위해 밀도 시험, 단위용적질량 시험, SEM 시험을 하였으며, 단열 시험을 위해 BA 모르터와 일반 모르터 몰드를 KS A 0006에서 정한 상온 상습의 환경조건에서 제작 후 항량이 될 때까지 온도 $105{\pm}2^{\circ}C$에서 건조하였다. 경량성 시험 결과 BA 모르터의 경량성은 일반 모르터의 0.72배로 일반 모르터에 비해 약 30%정도 가볍게 측정되어 BA를 건축물 재료로 활용할 경우 건축물 하중을 줄이는데 크게 기여할 것이다. 또한 단열 시험 결과 BA 모르터의 열전도율은 일반 모르터의 0.70배로 약 30%정도 단열성이 우수하다.

• 대한화학회지
• /
• 제17권6호
• /
• pp.416-423
• /
• 1973

양이온 교환수지(Ion Exchange Resin CGC 241)와 2염기산인 말론산 혹은 프탈산이온이 들어있는 용액에서 방사성 알칼리토류금속 이온이 수지와 용액사이에 어떻게 분배되는가를 실온에서 조사함으로써 알칼리토류금속의 유기산 착물 형성에 관한 연구를 하였다. 용매로서 H2O, 20% 에탄올-물 및 20% 아세톤-물을 사용하였고, 용액의 pH는 7.2∼7.5로 조절하였고, 이온강도는 0.10∼0.11fh 유지하였다. 본 연구결과 알칼리토류금속 이온과 말론산 및 프탈산 사이에 1:1착물이 모든 용매계에서 형성되었고 착물의 안정도는 다음순으로 증가됨을 알았다. $Ba^{++}\;<\;Sr^{++}\;<\;Ca^{++}$, 말론산 < 프탈산, 수용액 < 혼합용매