• 한국기계가공학회지
• /
• 제9권2호
• /
• pp.40-46
• /
• 2010

The purpose of this study is to show the friction and wear characteristics on the vapor deposited coating layers on the SCM415 steel. In this research, frictional wear characteristic of coating materials such as TiAlN+WC/C Multilayer Coating was investigated under room temperature, normal air pressure and nothing lubricating condition. Therefore this study carried out research on the friction coefficient, micro hardness(Hv), roughness, EPMA on the vapor deposited coating layers on the SCM415 steel. As the wear experimental result, the coefficient of friction decreased according to experimental load increases.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.117-123
• /
• 2011

The purpose of this study is to show the friction and wear characteristics on the vapor deposited coating layers on the SCM415 steel. In this research, frictional wear characteristic of coating materials such as Ti-series, Cr-series & WC/C and TiAlN+WC/C multilayer coating was investigated under room temperature, normal air pressure and no lubricating condition. Therefore, this study carried out research on the friction coefficient, micro hardness(Hv), surface roughness and wear quantity on the vapor deposited coating layers on the SCM415 steel. As the wear experimental result, the excellence of TiAlN+WC/C multilayer coating has been proven by high micro-hardness, low friction coefficient and wear quantity.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권1호
• /
• pp.78-82
• /
• 2017

Purpose: The purpose of this study is to evaluate failure characteristic and mechanism of four commercial water-repellent coatings for elevated temperature machinery applications. Method: Thermal degradation was performed for up to 64 thermal cycles. 1 cycle consists of 15 minute holding at 523K under 300rpm revolution and 15 minute-natural cooling. Contact angle was measured and microstructure of the coating layer was observed by using a scanning electron microscope. Results: Four kinds of commercial repellent coating showed hydrophobic or super-hydrophobic property implying that all coatings are suitable for room temperature application. Contact angle of three kinds of commercial coatings decreased rapidly after thermal exposure, while only one specimen having hydrophobic surface showed extremely slow degradation. Conclusion: Observed decrease in contact angle of the coatings were attributed to formation of macro-sized pores and disappearance of micro-protrusion during thermal exposure. Optimum water-repellent coating needs to be selected under the consideration of initial contact angle as sell as service temperature.

• 대한기계학회논문집A
• /
• 제38권12호
• /
• pp.1435-1440
• /
• 2014

로켓 노즐 목에 이용되는 ATJ 그라파이트에 대해 시편크기 및 온도에 따른 압축강도를 평가하였다. 압축시험은 ASTM C 965 규정에 준하여 상온 및 고온에서 수행되었다. 상온에서는 직경 대 높이 비가 1:2 인 ASTM 규정에 부합하는 표준시편 및 직경 대 높이비가 1:1 및 1:0.5 인 Type I, Type II 등 2종류의 확대시편이 일축 압축시험에 이용되었다. 또한 고온에서는 산화제를 도포한 코팅시편 및 일반시편을 이용하였다. 시험결과 상온에서 모든 확대시편들이 표준시편보다 약간의 압축강도 증가를 보였다. 고온환경에서의 압축시험결과 코팅시편은 $900^{\circ}C$ 까지 압축강도가 유지되거나 약간의 증가를 보였으나, 일반시편은 산화로 인해 압축강도가 급격하게 감소했다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.348-348
• /
• 2008

In recent, the concept of system-on-package (SOP) for highly integrated multifunctional systems has been paid attention to for the miniaturization and high frequency of electronic devices. In order to realize SOP, co-integration of passive devices, such as capacitors, resistors and inductors, and active devices should be achieved. If ceramic thick films can be grown at room temperature, we expect to be able to overcome many problems in conventional fabrication processes. So, we focused on the aerosol deposition method (ADM) as room temperature fabrication technology. ADM is a novel ceramic coating method based on the Room Temperature Impact Consolidation (RTIC) phenomena. This method has a wide range potential for fabrication of co-integration of passive and active devices. In this paper, I will present the future potential of ADM introducing various ceramic dielectric thick films for the integration of electronic ceramics.

• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.122-128
• /
• 2009

The purpose of this study is to show the friction and wear characteristics on the vapor deposited coating layers on the SCM415 steel. In this research, frictional wear characteristic of coating materials such as CrN, AlCrN, WC/C was investigated under room temperature, normal air pressure and nothing lubricating condition. Therefore this study carried out research on the friction coefficient, micro hardness(Hv), roughness, EPMA on the vapor deposited coating layers on the SCM415 steel.

• 한국결정성장학회지
• /
• 제16권3호
• /
• pp.121-126
• /
• 2006

HVOF thermal spray coating of Co-alloy T800 is progressively replacing the classical hard coatings such as chrome plating because of the very toxic $Cr^{6+}$ ion known as carcinogen causing lung cancer. For the study of the possibility of replacing of chrome plating, the wear properties of HVOF Co-alloy T800 coatings are investigated using the reciprocating sliding tester both at room and at an elevated temperature of $1000^{\circ}F\;(538^{\circ}C)$. The possibility as durability improvement coating is studied for the application to the high speed spindles vulnerable to frictional heat and wear. Wear mechanisms at the reciprocating sliding wear test are studied for the application to the systems similar to the sliding test such as high speed spindles. Wear debris and frictional coefficients of T800 coatings both at room and at an elevated temperature of $1000^{\circ}F\;(538^{\circ}C)$ are drastically reduced compared to those of non-coated surface of parent substrate Inconel 718. This study shows that the coating is recommendable for the durability improvement coatings on the surfaces vulnerable to frictional heat. The sliding surfaces are weared by the mixed mechanisms such as oxidative wear, abrasion by the sliding ball slurry erosion by the mixture of solid particles and small drops of the melts and semi-melts of the attrited particles cavitation by the relative motions among the coating, sliding ball, the melts and semi-melts. and corrosive wear. The oxide particles and the melts and semi-melts play roles as solid and liquid lubricant reducing the wear and friction coefficient.

• 동력기계공학회지
• /
• 제1권1호
• /
• pp.70-79
• /
• 1997

Ni-base self-fluxing alloy powder particles were flame sprayed onto the SS400 mild steel substrate surface. The effects of both substrate temperature and spraying distance on the splat behavior of sprayed particles were examined. The results obtained are summarized as follows: 1) In the splat behavior of Ni-base self-fulxing alloy particles sprayed onto the SS400 mild steel substrate, splashing was observed under the room temperature condition. On the contrary, it showed circular plate pattern in the substrate temperature range over 373K. 2) It was cleared that there was close relationship between mechanical properties of coating layer and splat behavior of sprayed particles. 3) From the experimental results, optimum spraying conditions showed excellent mechanical properties in the case of Ni-base self fluxing alloy sprayed onto the SS400 mild substrate were 473K of substrate temperature and 250mm of spraying distance.

• 한국식품저장유통학회지
• /
• 제8권2호
• /
• pp.181-186
• /
• 2001

The objective of this study is to determine the effect of soy protein isolate (SPI) film coating on the color, firmness, viscosity and weight loss of Rice Cake stored at 15, 20 and $25^{\circ}C$ (RH 50%) for 30 days. Raw materials mixed with SPI and cocoa powder (10:0, 7:3, 5:5, 3:7, w/w) were prepared. After adding sugar and shortening to raw materials, the mixture were refined to 25 micron of particle size. Coating of Rice Cake were carried out at $65^{\circ}C$. SPI coated Rice Cake had higher internal and external firmness comparing to the control at $25^{\circ}C$. SPI coated Rice Cake showed smooth surface morphology and had 0.71-1.01 mm of thickness. SPI coated Rice Cake showed less weight loss for 30 days compared to controls. SPI coating solution was successfully coated on Rice Cake and extended shelf-life over 15 days at room temperature.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.164-169
• /
• 2000

The remote measurement system(RMS) as a new experimental method is limited in its application to crack measurements at elevated temperatures because of the oxide layer on the specimen surface. Since TiAlN and Cr coating layers have a high resistance to oxidation and wear, this paper proposed a TiAlN and Cr coating technique for specimens to facilitate the measurement of crack growth behavior using RMS. To investigate the effects of the coating layer, tension and fatigue tests were carried out at room temperature and at 538$^{\circ}C$, using specimens of 1Cr-1Mo-0.25V steel. From the experimental results, it was found that the mechanical properties of the TiAlN and Cr coated specimens were similar to those of the substrate. Accordingly, the TiAlN and Cr coated layer had hardly any influence on the fatigue crack propagation.