• 소성∙가공
• /
• 제25권3호
• /
• pp.182-188
• /
• 2016

Flexibly-reconfigurable roll forming (FRRF) is a novel sheet metal forming technology conducive to producing multi-curvature surfaces by controlling the strain distribution along longitudinal direction. In FRRF, a sheet metal is shaped into the desired curvature by using reconfigurable rollers and gaps between the rollers. As FRRF technology and equipment are under development, a simulation model corresponding to the physical FRRF would aid in investigating how the shape of a sheet varies with input parameters. To facilitate the investigation, the current study exploits regression analysis to construct a predictive model for the longitudinal curvature of the sheet. Variables considered as input parameters are sheet compression ratio, radius of curvature in the transverse direction, and initial blank width. Samples were generated by a three-level, three-factor full factorial design, and both convex and saddle curvatures are represented by a quadratic regression model with two-factor interactions. The fitted quadratic equations were verified numerically with R-squared values and root mean square errors.

• 소성∙가공
• /
• 제26권6호
• /
• pp.341-347
• /
• 2017

Flexibly-reconfigurable roll forming (FRRF) is a novel sheet metal forming technology conducive to produce multi-curvature surfaces by controlling strain distribution along longitudinal direction. Reconfigurable rollers could be arranged to implement a kind of punch die set. By utilizing these reconfigurable rollers, desired curved surface can be formed. In FRRF process, three-dimensional surface is formed from two-dimensional curve. Thus, it is difficult to predict the forming result. In this study, a regression analysis was suggested to construct a predictive model for a longitudinal curvature of FRRF process. To facilitate investigation, input parameters affecting the longitudinal curvature of FRRF were determined as maximum compression value, curvature radius in the transverse direction, and initial blank width. Three-factor three-level full factorial experimental design was utilized and 27 experiments using FRRF apparatus were performed to obtain sample data of the regression model. Regression analysis was carried out using experimental results as sample data. The model used for regression analysis was a quadratic nonlinear regression model. Determination factor and root mean square root error were calculated to confirm the conformity of this model. Through goodness of fit test, this regression predictive model was verified.

• Tribology and Lubricants
• /
• 제31권4호
• /
• pp.177-182
• /
• 2015

Tapered roller bearings are widely used in equipment where high combined thrust and radial loads are experienced. A certain amount of tilting between the tapered rollers and the races always occurs because of bending moment load conditions and shaft deflection. It is now well understood that a coherent elastohydrodynamic lubrication (EHL) film separates the rollers and races. In spite of extensive study on EHL problems for over half a century, relatively few studies have focused on the finite line contacts problem. This study presents a complete numerical analysis of the effects of roller tilting on the EHL characteristics in a tapered roller bearing. We systematically analyze this highly nonlinear problem using finite differences with fully non-uniform grids and the Newton-Raphson method. Detailed EHL pressure distributions and film shapes are presented under moderate loads and material parameters. A very small roller tilting significantly affects the pressure distributions and film shapes near both ends of the roller. Moreover, the effect of tilting on the EHL characteristics at the small end is much greater than that at the large end. Therefore, in designing optimum profiles for tapered roller bearings, the profile radius should be larger at the small end.

• 제어로봇시스템학회논문지
• /
• 제21권8호
• /
• pp.723-728
• /
• 2015

In the conventional hot rolling process, the defects of products such as scratches occur due to impact and friction. Impact occurs as a result of the contact of between rollers and the slab. Also, friction occurs in the rolling process. To improve these defects, a variety of processes were developed. The flying touch method is also one of the processes to reduce defects and uses a movable upper roller. To use this unfixed roller, the impact and frictions between rollers and the slab should be minimized. This paper proposes a hot rolling process simulator to verify and test the efficiency of the flying touch method. The simulator was designed to verify the method. This paper also proposes a new impact reducing method and velocity synchronization method which are simulated to realize the method.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.15.2-15.2
• /
• 2009

Manufacturing of printed electronics using printing technology has begun to get into the hot issue in many ways due to the low cost effectiveness to existing semi-conductor process. This technology with both low cost and high productivity, can be applied in the production of organic thin film transistor (OTFT), solar cell, radio frequency identification (RFID) tag, printed battery, E-paper, touch screen panel, black matrix for liquid crystal display (LCD), flexible display, and so forth. The emerging technology to manufacture the products in mass production is roll-to-roll printing technology which is a manufacturing method by printings of multi-layered patterns composed of semi-conductive, dielectric and conductive layers. In contrary to the conventional printing machines in which printing precision is about $50~100{\mu}m$, the printing machines for printed electronics should have a precision under $30{\mu}m$. In general, in order to implement printed electronics, narrow width and gap printing, register of multi-layer printing by several printing units, and printing accuracy of under $30{\mu}m$ are all required. We developed the roll-to-roll printing equipment used for printed electronics, which is composed of un-winder, re-winder, tension measurement system, feeding units, dancer systems, guide unit, printing unit, vision system, dryer units, and various auxiliary devices. The equipment is designed based on cantilever type in which all rollers except printing ones have cantilever types, which could give more accurate machine precision as well as convenience for changing rollers and observing the process.

• 문화기술의 융합
• /
• 제10권3호
• /
• pp.861-864
• /
• 2024

모터로 다수의 롤러를 제어하여 대상 제품을 이송하는 자체 구동 롤러 컨베이어 시스템은 물류의 분기 및 합류, 대상 제품의 정렬 제어에 적합한 물류 시스템으로서 식품 제조 공정을 중심으로 활용도가 높아지고 있다. 본 논문에서는 유니티 소프트웨어를 활용하여 자체 구동 롤러 컨베이어 시스템의 3차원 그래픽 모델링 기반 시뮬레이션 환경을 구축하고, 대상 제품이 시간적으로 불규칙하게 공급되는 상황에서 시스템을 구성하는 롤러의 제어에 의해 일정한 간격을 유지하도록 정렬시킬 수 있는 기법을 제안하였다. 시뮬레이션 결과 대상 제품의 위치를 파악하는 센서데이터를 바탕으로 롤러를 구동하는 모터를 제어함으로써 제품의 효과적인 정렬이 가능함을 확인하였다.

• 소성∙가공
• /
• 제12권2호
• /
• pp.83-87
• /
• 2003

Current state of plastic processes of steel bearing parts is surveyed. According to the advances in plastic forming technologies and their great advantage to mass production, plastic processes are adopted in manufacturing majority of bering parts. The rings are forged or ring rolled and the rolling elements, i.e, balls or rollers are cold formed before fine machining. Bearing's steel retainers are mainly press formed using cold rolled seel strips. Including the general explanation about above processes, some details of forging technology, control of forging temperature and after cooling process, and examples of computer simulation are described.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.671-673
• /
• 1999

In order to cope with the occurrence of abnormal operation, rotatory condition monitoring system for guide roller of finishing train in wire rolling has been developed. In this study, proximity sensor and its holding devices that could overcome severe in-situ measurement conditions was designed and MMI software using C++ was programmed. Performance of the developed system turned out to be good enough as results of in-line test for POSCO #3 wire rolling mill. It is expected to contribute to prevent the cobble and the grade-down of products caused by the abnornormal operation of guide rollers.

• 한국인쇄학회지
• /
• 제7권1호
• /
• pp.16-30
• /
• 1989

The anodixed aluminium film by sulfuric acid - method has many pores, the inner, called barrier layers, is active. They have strong absorption of dye. on be other, the absorption of dye is lost by Sealing, the surface is not dyed. We make IMAGE FORMATION on the film by the chemical behavior. This study made sure whether ion absorption is not in the barrier layer by IRRS and ESCA, considerated the mechanism of inage formation.

• 한국인쇄학회지
• /
• 제10권1호
• /
• pp.23-33
• /
• 1992

The negative pressure distribution curves of the exit of printing nip were obtained by the transducer type tackometer. As the results, found that the elasticity of rubber rollers and pastic viscosity affect to the maximum negative and positive pressure but, the gap of the printing nip didn`t affects to the tack values of ink and ink film thickness. Ink spritting is accured by negative pressure and inks viscoelasticity. And the tack value is affect by properties of the vehicle component in the inks.