• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1207-1212
• /
• 2007

The critical speed of railway bogie related to the stability of the railway rolling-stock is important. Testing of the dynamic performance of bogie is conducted using a roller rig in a laboratory in place of field testing on track. This roller rig is composed of two rollers equivalent to track and used to test the dynamic characteristics of vehicle. But, the geometrical characteristics of the wheel/roller contact on the roller rig are different from those of the wheel/rail contact because the longitudinal radius of roller is not infinite compared with rail. This difference has influence on the wheelset behavior and the critical speed of bogie. Therefore in this paper, we have studied the behavior of wheelset and bogie on the roller rig for railway bogie testing with the purpose of developing the scaled roller rig. As an analysis results, it has been shown that the critical speed of bogie on the roller rig is slightly lower than that of bogie on track.

• 한국철도학회논문집
• /
• 제8권1호
• /
• pp.101-109
• /
• 2005

Roller test rig is the test facility for acquiring the data related dynamic characteristics of rolling stocks handily. The test method using roller test rig could be convenient to Set information about hunting and others rather than using field test. However, adopting this method brings about the inconvenient calibration process for measured data. This kind of additional effort results from the difference of contact condition between field test and test roller rig. In this paper, the numerical approach is used to get the amount of calibration. The analysis results of the field test are compared with results of the roller test rig to know what kind of alternation happens according to the change of contact condition.

• 한국철도학회논문집
• /
• 제9권5호
• /
• pp.618-623
• /
• 2006

Understanding the contact between wheel and rail is a starting point in railway vehicle dynamic research area and especially analysis for the contact geometry between wheel and rail is important. On the one hand, the critical speed as the natural characteristics of rolling-stock is generally tested on the roller rig. The geometrical characteristics of the wheel/roller contact on the roller rig are different from these of the general wheel/rail contact because the longitudinal radius of roller is not infinite compared with rail. Thus, in this paper we developed the algorithm to analyze the wheel/roller contact geometry of our roller rig which is constructed now and analyzed the difference between whee/roller contact and wheel/rail contact. In conclusion, we found that the yaw motion of wheelset and the roller radius influence the geometrical contact parameters in wheel flange contact area.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.543-550
• /
• 2011

The development of railway vehicles such as new mechanism of railway vehicle or design parameters of suspension have been used the application of scaled roller rig to the study of railway vehicle dynamics. In this paper, the critical speed was compared between full scale and 1:5 scale of numerical model. And to verify the simulation results, the critical speed was confirmed using the 1:5 scaled roller rig. According to the results, we expect that the developed roller rig will be used in the study for the dynamic characteristics of railway vehicle.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.296-300
• /
• 2007

Roller rigs have been built widely to study and evaluate the dynamic behaviors of railway vehicles, and they have particularly been applied to the development and routine maintenance of high-speed trains. However, there is no roller rig for routine maintenances of high speed train in Korea, although high speed train is running on the lines. Therefore, it is very important issue to check and evaluate the dynamic responses of high speed train after several years of operation. This paper presents a study on the conceptual design and dynamic model to develop the roller rig for the routine maintenances of high speed trains. The roller rig has two independent electronic motor and maximum speed of 350km/h, which can simulate running on straight and curved track. CATIA V5 was used to design the 3D geometrical models and ADAMS was used to verify and analyze the dynamic behaviors of roller rig.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.585-586
• /
• 2006

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.277-278
• /
• 2007

• 한국철도학회논문집
• /
• 제11권2호
• /
• pp.145-150
• /
• 2008

본 연구에서는 고속 철도차량의 유지보수용 주행시험기에 대한 개념설계와 동적모델 제시에 대한 연구를 진행하였다. 주행시험기는 철도차량에 대한 성능시험을 실제 레일 위에서 보다 많은 시간을 절약하여 다양한 시험을 실시할 수 있는 장비이다. 고속화되는 철도차량의 정밀 점검을 위해 유지 보수용 주행시험기의 새로운 사양의 설계에 대한 연구를 진행 하였으며, 국내 고속철도 차량을 기준으로 350km/h급의 개념설계와 동적모델을 제시하였다. ANSYS는 휠/롤러의 접촉거동에 대한 구동축 해석에 사용되었으며, ADAMS는 주행시험기의 동적거동과 특성에 대한 해석에 적용하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1611-1612
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.991-992
• /
• 2008