• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.749-752
• /
• 2014

The device performance of n-channel MuGFET with different fin width, existence of spacer and channel length has been characterized. Tri-Gate structure(fin number=10) has been used. There are four kinds of Tri-Gate with fin width=55nm with spacer, fin width=70nm with spacer, fin width=55nm without spacer, fin width=70nm without spacer. DIBL, subthreshold swing, Vt roll-off, (above Short Channel Effect)and hot carrier stress degradation have been measured. From the experiment results, short Channel Effect with spacer was decreased, hot carrier degradation with spacer and narrow fin width was decreased. Therefore, layout of LDD structure with spacer and narrow fin width is desirable in short channel effect and hot carrier degradation.

• Korean Journal of Metals and Materials
• /
• v.50 no.12
• /
• pp.873-882
• /
• 2012

Dual Phase (DP) steel which has a soft ferrite phase and a hard martensite phase reveals both high strength and high ductility and has received increased attention for use in automotive applications. To conduct structural analysis to verify vehicle safety, highly credible experimental results are required. In this study, tensile tests were performed in a strain rate range from $10^{-4}/s$ to 300/s for Sink Roll-Less (SRL) hot-dip metal coated sheets. Collision properties were estimated through simulation by LS-DYNA using the stress-strain curve obtained from the tensile test. The simulation results were compared with the actual crash test results to confirm the credibility of the simulation. In addition, a tensile test and a crash test with 2% prestrain and a baking (PB) specimen were evaluated identically because automotive steel is used after forming and painting. The mechanical behaviors were improved with an increasing strain rate regardless of the PB treatment. Thus, plastic deformation with an appropriate strain rate is expected to result in better formability and crash characteristics than plastic deformation with a static strain rate. The ultimate tensile strength (UTS) and absorbed energy up to 10% strain were improved even though the total elongation decreased after PB treatment, The results of the experimental crash test and computer simulation were slightly different but generally, a similar propensity was seen.

• Child Health Nursing Research
• /
• v.4 no.2
• /
• pp.159-176
• /
• 1998

In effort to conduct comparative study on the caregiving environment of Neonatal Intensive Care Unit(NICU) in both U. S and Korea, this study was been conducted first in the U.S. Purpose : The purpose of this study is to identify the physical environment and direct caregiving practices to lowbirth weight infants in NICU in the US. It also aims to examine the NICU outcome status and behavioral reponses of lowbirth weight infants. Methods : A study design using descriptive and inferential statistics was been conducted through an observational, field method. A sample of 15 preform infants admitted to NICU were recruited for the study. The subjects were those with birth weight between 1,000 gm to 1,500 gm, born at the gestation period of 27 to 33 weeks, and without any chromosomal or other genetic anomalies, major congenital infections, or maternal illness. Thirty minutes observation(three times of ten minutes of continuous observation)of the infant's behavior and physiological status, and an four-hour observation of the physical environment and direct care giving procedures were been conducted on the 3rd and 10th day after birth, and on the day of discharge from the NICU or at 34weeks postconception. The data to be collected were in four areas : the demograghic characteristics of the infants, the physical environment and care giving procedures, the frequency of the infant's designated behavior and physiological response, and NICU outcome variables. A descriptive analysis and Kruskal-Wallis, Pearson r were been applied according to variable characteristics. Results : 1. Mother's mean age was 29.47. The sample consisted of 6 males and 9 females. Mean gestational ages were 29.17 weeks. Mean birth weight was 1236.33g. Mean Apgar scores at one minute were 6.6, and 7.8 at five minutes. 2. The location for the incubator was in the distance from the light, X-ray screens and nursing station, in proximity to side-lamp, telephone and faucet on the third day after birth. The location for the incubator was in the distance from the light and radio on the tenth day and in proximity to nursing station on the day of dischage from the NICU or at 34weeks postconception. 3. Nesting was the most applying aids to the infants. And foot roll, shielding and plastic frame were frequently using by nurses for facilitating well modulated restful posture. 4. There were statistically significant changes in the patterns of physical environment included locating the infant's incubator and bedding, specific aids to self regulation on the 3rd and 10th day after birth, and on the day of discharge from the NICU or at 34weeks postconception. 5. Statistically significant changes were not appeared in the patterns of direct caregiving procedure to the infants included stress inducing or reducing manipulations on the 3rd and 10th day after birth, and on the day of discharge from the NICU or at 34weeks postconception. 6. The stress response of the infants in NICU were significantly reduced as the infants grow older. 7. There were not statistically significant correlation between the physical envronment and the stress responses of the infants in NICU. 8. There were statistically significant correlation between the direct caregiving procedure to the infants and the stress response of the infants in NICU in the second and third observation on the day three. 9. Average weight gain per day from birth to discharge was 38.73g, number of days in the hospital was 42.60, number of days before bottle feeding was 3.6. Postconception age starting bottle feed ing was 31/sup +5/ weeks. Number of days on mechanical ventilator was average 7.64, 11.42 was an average number of days of oxygen need. Conclusion : It, thus, appears that to minimize the sensorymotor stimulation for the low birthweight preterm infant in NICU, manipulation of care giving practices to the babies whatever the stress inducing or reducing procedures, have to be limited in the immediate early stage after birth. And it needed to be reexamine to identify the appropriate and specific physical environment and the patterns of direct caregiving to the low birthweight preform infant as the infants grow older in NICU.

• Culinary science and hospitality research
• /
• v.16 no.2
• /
• pp.77-95
• /
• 2010

This study aims to analyze importance and performance factors on the quality of wellbeing fusion menu of fusion restaurants to provide helpful information for building up a detailed marketing strategy and present considerations for sales increase and more efficient business results. Importance on menu quality scored a higher level than performance on the whole in fusion restaurants. Notably, in regard to attributes of menu quality, it was found that respondents put higher stress on 'taste of food', 'sanitary of food', 'cleanliness of vessels', 'quality of menu' and 'freshness of food' than anything else. Wellbeing fusion menu which has an high intake frequency rate includes 'green vegetable noodles with black bean sauce', 'sweet pumpkin salad', 'salmon salad', and 'shrimp vegetable gratin' in that order. On the other hand, the intake frequencies of 'ovened green perilla gratin', 'pomegranate dressing tofu', 'bacon roll with glutinous rice powder', and 'pomegranate dressing bacon' were rated very low. In terms of the IPA analysis on wellbeing fusion menu quality, it was important to continuously maintain 'taste of food', 'sanitary of food', 'cleanliness of vessels', 'freshness of food', 'quality of menu', 'diet menu(low fat, low calories)', 'vegetable menu', 'nutrition of food', 'variety of menu' etc. Such items as 'price', 'distinction with existing food', and 'environment-friendly organic agriculture food material' are in need of intensive care and operation.

• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.3
• /
• pp.160-166
• /
• 2001

The change of ribbon geometry, microstructure and shape recovery with Mn contents, wheel speed and various annealing temperature have been studied in Fe-X%Mn-5Cr-5Co-4Si (X%=15, 20, 24) shape memory alloy (SMA) ribbons rapidly solidfied by single roll chill-block melt-spinning process. The thickness and width of melt-spun ribbons are reduced, results in refining and uniformalizing grains with increasing wheel speed. In the ribbons melt-spun at a wheel speed of 15m/sec, both ${\varepsilon}$ and ${\alpha}^{\prime}$martensites are formed in ribbon 1 (15.5wt%Mn), while only ${\varepsilon}$ martensite is revealed in ribbon 2 (20.2wt%Mn) and ribbon 3 (23.5wt%Mn). The volume fraction of ${\varepsilon}$ martensite is decreased with increasing Mn contents, and those of ${\varepsilon}$ as well ${\alpha}^{\prime}$martensites are increased due to thermal stress relief and grain growth with increasing annealing temperature. Ms temperatures of the ribbons 1, 2 and 3 are fallen with increasing Mn contents. $M_s$ temperatures of the ribbons 1, 2 and 3 annealed at $300^{\circ}C$ for 3 min are risen abruptly, but are nearly constant even at higher annealing temperature, i.e., 400, 500 and $600^{\circ}C$ for 3 min. Shape recovery of the ribbons 1, 2 and 3 increased 30%, 52% and 69% with Mn contents, respectively. Shape recovery of ribbon 1 (15.5wt%Mn) formed ${\varepsilon}$ and ${\alpha}^{\prime}$martensites decreased because of the presence of ${\alpha}^{\prime}$martensite but those of ribbon 2 (20.2wt%Mn) and ribbon 3 (23.5wt%Mn) formed ${\varepsilon}$ martensite increased with increasing annealing temperature.

• Journal of Plant Biotechnology
• /
• v.37 no.3
• /
• pp.305-312
• /
• 2010

During a last decade, the introduced traits in commercialized GM crops have been diversified from a simple trait such as herbicide resistance gene or insectresistance gene which are related to the crop production into more complicated traits such as modification of fatty acid or essential amino acid composition, modified coloring pattern of flower. In addition, it was investigated that several other GM crops bearing more refined traits expected to lead next generation are also awaiting for risk assessment (RA) or under field test for the preparation of RA in the near future. These GM crops include abiotic stress resistance including drought or cold, increased biomass, production of bioethanol or diesel, production of pharmaceuticals or functional materials for industrial. In particular, in 2008 and 2009, it was reported that the highest number of GM crops for molecular farming are under developed in laboratory or green house level in all the world. Likewise, in Korea, 171 events from 49 plant species are under developed to introduce several important traits. At present, about 10 events are under field test to select elite lines for RA application. For the first time, herbicide resistance turfgrass developed by Korean research team has been submitted for RA and currently under requested for additional data. Moreover, GM rice resistant to leaf roll (folder) disease is expected as a next event to be submitted for RA application.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.239-246
• /
• 2017

There are various transversal structures (small dams or drop structures) in median and small streams in Korea. Most of them are concrete structures and it is so hard to exclude low-level water. Unless drainage valves and/or gates would not be installed near bottom of bed, sediment from upstream should be deposited and also contaminants attached to the sediments would devastatingly threaten the water quality and ecosystem. One of countermeasures for such problem is the bypass pipe installed underneath the transversal structure. However, there is still issued whether it would be workable if the gravels and/or stones would roll into and be not excluded. Therefore, in this study, the conditions to exclude the rip stone which enter into the bypass pipe was reviewed. Based on sediment transport phenomenon, the behavior of stones was investigated with the concepts from the critical shear stress of sediment and d'Alembert principle. As final results, the basis condition (${\tau}_c{^*}$) was derived using the Lagrangian description since the stones are in the moving state, not in the stationary state. From hydraulic experiments the relative velocity could be obtained. In order to minimize the scale effect, the extra wide channel of 5.0 m wide and 1.0 m high was constructed and the experimental stones were fully spherical ones. Experimental results showed that the ratio of flow velocity to spherical particle velocity was measured between 0.5 and 0.7, and this result was substituted into the suggested equation to identify the critical condition wether the stones were excluded. Regimes about the exclusion of stone in bypass pipe were divided into three types according to particle Reynolds number ($Re_p$) and dimensionless critical shear force (${\tau}_c{^*}$) - exclusion section, probabilistic exclusion section, no exclusion section. Results from this study would be useful and essential information for bypass pipe design in transveral structures.

• Education of Primary School Mathematics
• /
• v.10 no.1 s.19
• /
• pp.41-56
• /
• 2007

Related with the mathematics gifted children the situation of different case studies is the research which is limited in mathematics problem solving process of the most mathematics gifted children. The research which it sees hereupon observes from the scope which is wider the quality of the mathematics gifted children, before the hazard mathematics gifted children whom it sees enter into the mathematics gifted children education center unit life and life after studying living and dismissal of a class from the general school, namely for their general life it leads compared to attitude it observes the reporter it does a quality. For a what kind of interest in the mathematics gifted children, the research leads the family or general class, from the gifted children education center it has it considers encouragement, map and to give a help to good mathematics gifted children education activation, it does. It will reach and to respect with afterwards it set a same three research problem. First, before entering into the mathematics gifted children education center, are the mathematics gifted children what kind of quality? Second, Are the mathematics gifted children what kind of quality for general school hour? Third, Are the mathematics gifted children what kind of quality after dismissal of a class after hour? Being selected in the hazard gifted children education center which solves an up research problem, simple characteristic and approach ease characteristic, by the condition of the permission possibility back it selected 2 person gifted children school boxes which are coming and going. And, before entering into these mathematics gifted children education center, studying life from the general school, life after dismissal of a class it will extend at 1 years, various recording it will ask and it collected direct observation and interview it led against their quality it analyzed. It shared the result which it analyzes with emotional quality, studying conduct qualities, general qualities of the mathematics gifted children and qualities of mathematics gifted children parents. Studies level of the mathematics gifted children parents high facility when them are young from, the interest and helping out which it has were considerable, to advance with the direction where in order for always with great disaster them are proper the map it did. In general quality of the mathematics gifted children from young age the ability which finds a language and a possibility concept superiorly the ability which expresses the thought of oneself logically was superior, the competitive spirit was high, it liked it came reading, a leader role, to reveal a deepening school with the fact that it comes and goes. Also it will burn with their studying conduct quality and it will roll and it did deeply and it arranged knot eagerly, accomplishing which is superior from the field which is various it showed, the originality was superior, the subject attachment power was high quite, oneself it studies it has a devotion the possibility of knowing it was. And, the social characteristic of the friends and is good with their emotional quality and it does there is own reflection and an encouragement at any time and also a confidence, but just as good as the stress also it receives the possibility of knowing it was to him.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.4
• /
• pp.253-262
• /
• 2014

This, an association research for design-improvement and model-development of exhibition shops at rural tourism communities, is to secure objective data by analyzing customers' awareness-tendency of and demand for agricultural-specialty exhibition shops. Survey-questions for finding out consumers' awareness-tendency and demand were determined through brainstorming of a professional council, 30 rural communities of which visit-rate by consumers is considerably high were selected for the recruit of 200 consumers. For investigation and analysis, survey and in-depth interview were carried out at the scene with the application of frequency analysis and summarization of their opinions, which revealed that they have a strong will to visit the rural tourism communities for the purchase of agricultural specialties along with the experience of learning-program and on-the-scene direct dealing and that their viewpoint on the direct dealing at the scene was very positive. Also it was confirmed hat their satisfaction with the purchase of agricultural specialties by on-the-scene direct dealing, their pleasure at the purchase, their satisfaction with services and their intention for re-purchase of them were very high while their satisfaction with the exhibition shops was very low. With on-the-scene survey, the consumers' opinions could be listened to in depth. Almost all of them said their satisfaction with the trip to those rural tourism communities was considerably high since they could go to those communities themselves to relieve the stress from their modern life, to experience healing and to see the goods on the scene. Their satisfaction also was attributed to the fact that they have enough trust in purchase along with feeling the warm-heartedness of rural residents. As to their awareness of exhibition shops, they showed a positive response to the on-the-scene direct dealing at rural communities while they, thinking that the space in those exhibition shops was not sufficiently wide, demanded for more systematic counters in more accessible and affordable exhibition shops so that they might be more satisfied with the exhibition shops. Their demand for the necessity of exhibition shops selling agricultural specialties was found to be over 80%, which indicates that the necessity is very high. As to the suitability of function, they have the opinion that the business at those shops had better be focused on sales since they have the understanding of information when they take a trip to the rural communities, while there was another opinion: since agricultural products are seasonal items they should be exhibited and sold at the same time. More than 90% of the respondents had a positive viewpoint on direct dealing of agricultural specialties on the scene, which showed that their response to it was very high. They preferred the permanent shops equipped with roll-around table-booths. In addition, it was revealed that they want systematic exhibition shops in rural communities because they frequent those communities for on-the-scene direct purchase. The preferred type and opinion resulting from estimation of consumers' demands have been reflected for development of practical designs. The structure of variable principles has been designed so that the types of display-case and table-booth might be created. The result of this study is a positive data as a design model which can be utilized at rural communities and will be commercialized for the verification of its validity.