• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.991-994
• /
• 2000

Recently, reliability engineering is regarded as the major field for aerospace and electronics, semiconductor related industry to improve safety and life cycle. And advanced manufacturing systems with high speed and intelligent have been developed for the betterment of machining ability In this case, reliability prediction has also important roll from design procedure to manufacturing and assembly process. Accordingly in this study, reliability evaluation system has been developed for prevention trouble. quality and life cycle improvement extremely for advanced mother machinary.

• 동아시아식생활학회지
• /
• 제14권5호
• /
• pp.495-500
• /
• 2004

This study was carried out to develop a new product using Cheonggukjang (fermented soybean product) and sub-ingredients(lactic acid bacillus powder, chlorella, lactose, green tea). Fresh Cheonggukjang was dried by a infrared drying(50℃, 36hr) and powdered by a roll mill. The powder was mixed with sub-ingredients and then moulded as tablet type by a press moulder. The pH of tablet was low with the addition of lactobacillus and total sugar content was high with the addition of lactose. Disintegration, absorption capacity and textural properties of tablet were not affected by the addition of any sub-ingredient. Color of non-added tablet was yellow to red, but changed to green when chlorella was added. Sensory properties(color, taste, flavor, chewiness, hardness, acceptability) were not affected by the addition of sub-ingredients. The results indicate that functional healthy tablet could be made from Cheonggukjang powder and various sub-ingredients.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권8호
• /
• pp.445-450
• /
• 2000

Many successful developments and microscopic studies have been made on the high quality insulating materials. However, a little attention have given to the macroscopic interface in HV(High Voltage) insulating systems. In this study, AC interfacial breakdown strength and V-t characteristic of the interface between Epoxy/EPDM(ethylene propylene diene terpolymer) are investigated. Electrode system is designed to reduce the charges from electrodes and to have the tangential potentials along the interface between Epoxy/EPDM by FEM(finite elements method). The AC breakdown strength is observed when HV is given to the interface. It is shown that AC interfacial breakdown strength is improved by increasing interfacial pressure and oiling. In particular, it was saturated at certain interfacial pressure level. V-t characteristic is able to extend to the life time of the interface between Epoxy/EPDM. Oiling also plays a good roll in prolongation of the life time.

• 복식문화연구
• /
• 제5권2호
• /
• pp.169-180
• /
• 1997

The purpose of this study is to extract 'the Rite of Passage'from a Korean novel, 'HON-BUL', and to analysis intrinsic meanings and function of the symbols, their personal meanings and social meanings from it. A pragmatical method was used for the analysis of this research. The results were as followings : The meaning of the Rite of Passage and the Costumes had mainly incantatory characters ; son-wish, wealth, amicable relations between a husband and a wife, long life, and perpetual thought. But the amount of grasping of meaning was thought to be depended on the reading ability of readers. Since the Wedding Ceremony and the Funeral Ceremony were described a lot of times in the novel, it was known that they were regarded as very important Rite of Passage in the whole life. The TEXT which were cited from the novel showed that the Rite of Passage was traditionally described as the Birth Ceremony, the Wedding Ceremony (includes the Puberty Ceremony), and the Funeral Ceremony. The analysis of meaning in a novel had an important roll to understand CULTURE, SOCIAL LIFE, and TIMES in a written novel. Therefore a novel is very valuable to analyze them as the DISCOURSE and the TEXT.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권5호
• /
• pp.487-495
• /
• 2016

In the offshore project such as semi-submersible FPU and FPSO, the free fall type life boat called TEMPSC (Totally Enclosed Motor Propelled Survival Craft) has been installed for the use of an emergency evacuation of POB (People on Board) from the topside platform. For the design of life boat arrangement for semi-submersible FPU in the initial design stage, the drop height and launch angle are required fulfill with the limitation of classification society rule and Company requirement, including type of approval as applicable when intact and damage condition of the platform. In this paper, we have been performed the numerical studies to find proper arrangement for the life boats consider drop height in various environmental conditions such as wave, wind and current. In the calculations, the contributions from static and low frequency (LF) motions are considered from the hydrodynamic and mooring analysis as well as damage angle from the intact and damage stability analysis. Also, Air-gap calculation at the life boat positions has been carried out to check the effect on the life boat arrangement. The air-gap assessment is based on the extreme air-gap method includes the effect of 1st order wave frequency (WF) motions, 2nd order low frequency roll/pitch motion, static trim/heel and set down.

• 펄프종이기술
• /
• 제43권2호
• /
• pp.77-82
• /
• 2011

The changes in the wet pressing response of old corrugated container(OCC) stock depending on the beating treatment and the addition of polymer aids were investigated with laboratory roll press instrument. Two types of polymer aids, such as high molecular weight polymer with low charge density and low molecular weight polymer with high charge density, were applied in this study. The more beaten OCC stock showed the lower dryness after wet pressing. The addition of polymer aids had great influences on the wet pressing efficiency and paper properties. The dryness after wet pressing was increased by the addition of polymer aids, but the pattern of changes in dryness were different depending on the type of polymer and the properties of stock. The higher molecular weight polymer aids showed the greater increase in the dryness. The properties of paper such as air permeability, bulk, formation, tensile strength were also greatly affected by the addition of polymer aids.

• Bulletin of the Korean Chemical Society
• /
• 제27권4호
• /
• pp.568-572
• /
• 2006

To study the effect of sequence on DNA structure, the two decamer crystal structures one alternating,d(GTACGCGTAC), and the other non-alternating, d(GGCCGCGGCC), were solved. Crystals of both decamers belong to the hexagonal space group $P6_122$, with one strand in the asymmetric unit. The unit cell constants of the alternating decamer are a = b = 39.26 $\AA$, c = 77.70 $\AA$. The structure was refined with 1,828 reflections from 8.0 to 2.0 Aresolution to an R value of 21.3% with all DNA atoms and 63 water molecules. The isomorphous non-alternating decamer had unit cell dimensions of a = b = 39.05 $\AA$, c = 82.15 $\AA$. The structure was refined with 2,423 reflections from 8.0 to 2.0 $\AA$ resolution to a final R value of 22.2% for all DNA atoms and 65 water molecules. Although the average helical parameters of the decamers are typical of A-DNAs, there are some minor differences between them. The helical twist, rise, x-displacement, inclination and roll alternate in the alternating decamer, but do not in the non-alternating decamer. The backbone conformations in both structures show some differences; the residue G(7) of the alternating decamer is trans for $\alpha$ and $\gamma$ while the trans conformations are observed at the residue G(8) of the non-alternating decamer.

• Current Research on Agriculture and Life Sciences
• /
• 제32권3호
• /
• pp.159-163
• /
• 2014

본 논문에서는 저가의 MEMS 관성 센서와 지자기 센서를 이용하여 자세 정보를 제공받는 자세측정장치(ARHS)를 구현하였다. 저가형 IMU센서와 MCU를 이용하여 운동 자세각을 계산하는 DCM 알고리즘을 설계하고, 3축짐벌에 장착하여 연산결과의 정확도를 측정하였다. DCM 알고리즘을 이용 연산된 자세각의 정확도는 roll 및 pitch에 대하여 약 1.1%로 나타났으며, yaw각의 경우는 3.7%로 나타났다. Yaw 각의 경우에는 스텝핑 모터를 구동하는 실험환경에 따른 교란의 영향으로 그 오차가 상대적으로 크게 나타난 것으로 평가되었다. 짐벌 실험장치를 이용한 센서의 검증에서 더욱 정밀한 실험을 위해서는 주변 환경 요인에 대한 제어가 요구될 것으로 보이며, 실험장치의 스테핑 모터 구동 시 발생하는 진동 및 자기장의 영향과 실험 장치의 금속성 구조물의 영향으로 생각되는 센서 데이터의 오차 및 불안정 상태를 차단할 수 있는 장치의 보완이 필요할 것으로 보인다. 그리고 지자기 센서의 경우 좁은 범위의 측정에 추가하여 넓은 범위의 측정도 보완되어야 할 것으로 생각된다.

• 펄프종이기술
• /
• 제40권1호
• /
• pp.35-40
• /
• 2008

The environment of agriculture in Korea is changed very rapidly. Since the labours in fruit cultivation field are getting older, the resources and the aid materials for farming need to be multi functional and easy to use. Therefore, They have to use various kind of aid materials in field of fruit cultivation like as fruiting bag. The development of practical utilization way of embossing process for manufacturing of fruiting bag and wrapping paper of agricultural products was main purpose of this study. Embossing roll was designed in Ginyong Embo(Co.) for the embossing process of fruiting bag. The embossing treated fruiting bag was manufactured in Agro(Co.) at mill scale. The mechanical properties of embossing paper was investigated and operation efficiency of bagging was tested at field. The properties of embossed paper was satisfied for fruiting bags for cultivation of apple and pear.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1044-1051
• /
• 2004

This paper described a novel locomotion interface that can generate infinite floor for various surface, named as virtual walking machine. This interface allows users to participate in a life-like walking experience in virtual environments, which include various terrains such as plains, slopes and stair ground surfaces. The interface is composed of two three-DOF (X, Y, Yaw) planar devices and two four-DOF (Pitch, Roll, Z, and relative rotation) footpads. The planar devices are driven by AC servomotors for generating fast motions, while the footpad devices are driven by pneumatic actuators for continuous support of human weight. To simulate natural human walking, the locomotion interface design specification are acquired based on gait analysis and each mechanism is optimally designed and manufactured to satisfy the given requirements. The designed locomotion interface allows natural walking(step: 0.8m, height: 20cm, load capability: 100kg, slope:30deg) for various terrains.