• 산업기술연구
• /
• 제20권B호
• /
• pp.45-53
• /
• 2000

A numerical study is done on the thrust vector control using gaseous secondary injection in the rocket nozzle. A commercial code, PHOENICS, is used to simulate the rocket nozzle flow. A $45^{\circ}-15^{\circ}$ conical nozzle is adopted to do numerical experiments. The flow in a rocket nozzle is assumed a steady, compressible, viscous flow. The exhaust gas of the rocket motor is used as an injectant to control the thrust vector of rocket at the constant rate of secondary injection flow. The injection location which is on the wall of rocket is chosen as a primary numerical variable. Computational results say that if the injection position is too close to nozzle throat, the reflected shock occurs. On the other hand, the more mass flow rate of injection is needed to get enough side thrust when the injection position is moved too far from the throat.

• 한국항행학회논문지
• /
• 제22권2호
• /
• pp.90-95
• /
• 2018

로켓 (rocket)이란 배출가스를 빠르게 분사하여 그 반작용의 힘으로 추진력을 발생시키는 추진 장치이다. 그리고 고체추진 로켓 (solid rocket motor)의 구조에서 노즐(nozzle)은 추력을 발생시키는 중요한 구성품으로 고온/고압 환경으로 인하여 연소되며 액체로켓 (liquid rocket propulsion systems)과 다르게 노즐을 냉각시킬 수 없어 연소가스에 의해 침식 (erosion)이 발생한다. 본 논문은 oxy-acetylene torch tester를 개발 및 이용하여 흑연 (graphite) 재질의 노즐목 (nozzle throat) 내열재에 대하여 열화학적 침식 특성을 실험 및 이론적 모델로 규명하고 이를 통하여 침식에 영향을 미치는 주요 인자에 대하여 연구하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.275-282
• /
• 2008

This paper presents numerical investigation of multi-phase flow in solid rocket motor nozzle and effect of multi-phases on the performance prediction of the Solid Rocket Motor. Aluminized propellants are frequently used in solid rocket motors to increase specific impulse. An Eulerian-Lagrangian description has been used to analyze the motion of the micrometer sized and discrete phase that consist of the larger particulates present in the Solid Rocket Motor. Uniform particles diameters and Rosin-Rammler diameter distribution method has been used for the simulation of different burning of aluminum droplets generating aluminum oxide smokes. Roe-FDS scheme has been used to simulate the effects of the multi-phase flow. The results obtained show the sensitivity of this distribution to the nozzle flow dynamics, primarily at the nozzle inlet and exit. The analysis also provides effect of two phases on performance prediction of Solid Rocket Motor.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.495-499
• /
• 2005

인하 로케트 연구회에서는 기존의 복합추진제 모터의 노즐 재료를 기존의 세라믹에서 Teflon으로 대체하여 추력 성능을 개선하였다. Teflon으로 제작된 노즐은 지상시험과 추력 측정을 통해 결과를 확인하였다. Teflon을 이용한 노즐은 기존의 세라믹 노즐과 비교해서 신뢰성을 높이면서 총충격량을 18.3%만큼 증가시킬 수 있었다. 새로운 제작 공정은 노즐 생산 시간도 줄였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.282-287
• /
• 2001

The CSCM Upwind method and Material Transport Analysis (MTA) have been used to predict the thermal response and ablation rate for non-charring material to be used as thermal protection material (TPM) in KSR-III test rocket nozzle. The thermal boundary conditions such as cold wall heat-transfer rate and recovery enthalpy for MTA code are obtained from the upwind Navier-Stokes solution procedure. The heat transfer rate and temperature variations at rocket nozzle wall were studied with shape change of the nozzle surface as time goes by. The surface recession was severely occurred at nozzle throat and this affected nozzle performance such as thrust coefficient substantially.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.144-148
• /
• 2001

Characteristics of high temperature rocket nozzle flow is discussed along with the aspects of computational analysis. Three methods of nozzle flow analysis, frozen-equilibrium, shifting-equilibrium and non-equilibrium approaches, were discussed those were coupled with the methods of computational fluid dynamics. A chemical equilibrium code developed for the analysis of general hydrocarbon fuel was coupled with three approaches of nozzle flow analysis, and a test was made for a bell nozzle at typical operation condition. As a results, the characteristics of the approaches were discussed in aspects of rocket performance, thermal analysis and computational efficiency.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.90-98
• /
• 2001

Characteristics of high temperature rocket nozzle flow is discussed along with the aspects of computational analysis. Three methods of nozzle flow analysis, frozen-equilibrium, shifting-equilibrium and non-equilibrium approaches, were discussed, those were coupled with the methods of computational fluid dynamics code. A chemical equilibrium code developed for the analysis of general hydrocarbon fuel was coupled with three approaches of nozzle flow analysis. The approaches were used for the performance prediction of KSR-III Rocket, and compared with the theoretical results from NASA CEA (Chemical Equilibrium with Applications) code.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.8-12
• /
• 2009

In this study the performance of the nozzle of a rocket system is evaluated using a CFD code. The main emphasis of the investigation is placed on the effects of the number (9 and 12) and the depth of fluted edge in the rocket nozzle. It is observed that as the depth increases the rolling moment of the nozzle increases while the thrust of the nozzle decreases.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 추계 학술대회논문집
• /
• pp.54-59
• /
• 2000

A numerical study of axisymmetric rocket main nozzle flow has been accomplished. The CSCM upwind flux difference splitting method with an iterative time marching scheme having second order accuracy in time and space has been used to simulate unsteady flow characteristics in an axisymmetric rocket main nozzle. Though the pressure vary at nozzle inlet with the lapse of time, Mach No. and the density were not changed significontly compared with the temperature. Specific heat ratio $\gamma$=1.134 predicted higher temperature at nozzle throat and exit and nondimensional thrust coefficients at exit than specific heat ratio $\gamma$=1.4 did.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.365-369
• /
• 2007

고체로켓은 액체로켓 보다 많은 점에서 제한적으로 작용된다. 추진제의 혼합비, 연소 시간과 면적 등 연소의 모든 부분이 결정되기 때문에 액체로켓보다 제어하기 어렵다. 하지만 제작비가 싸고 신뢰성 확보가 용이하고 추력/중량 비에 따른 초기 속도를 크게 할 수 있기 때문에 소형로켓으로 폭넓게 이용되고 있다. 고체로켓의 추력증가에 따른 노즐의 내부 벽에 열전도로 인해 타는 현상과 고속의 연소가스에 의한 침식현상을 제어하기 위해 노즐냉각에 대한 연구를 수행하였다.