• Structural Engineering and Mechanics
• /
• v.68 no.4
• /
• pp.497-505
• /
• 2018

Three points bending flexural test was modeled numerically to study the crack propagation in the pre-cracked beams. The pre-existing edge cracks in the beam models were considered to investigate the crack propagation and coalescence paths within the modeled samples. The effects of particle size on the single edge-notched round bar in bending test were considered too. The results show that Failure pattern is constant by increasing the ball diameter. Tensile cracks are dominant mode of failure. These crack initiates from notch tip, propagate parallel to loading axis and coalescence with upper model boundary. Number of cracks increase by decreasing the ball diameter. Also, tensile fracture toughness was decreased with increasing the particle size. In the present study, the influences of particles sizes on the cracks propagations and coalescences in the brittle materials such as rocks and concretes are numerically analyzed by using a three dimensional particle flow code (PFC3D). These analyses improve the understanding of the stability of rocks and concretes structures such as rock slopes, tunnel constructions and underground openings.

• Geotechnical Engineering
• /
• v.7 no.2
• /
• pp.27-40
• /
• 1991

The Sunghak Campus, Dong-A University, which located at the excavated area of mountain, has been constructed year by year for about 10 years since 1978. The buildings, steep slopes, road and so on in the Campus area were damaged by heavy rainfall more than 200mm 1 day on August, 1989. The methods used for the investigation and repair methods of the damage are the preliminary investigation, the present condition survey, 50 by 50m grid survey, compasstraverse for locating outcrops, geopysical exploration, geologic survey, boring and laboratory soil testing. Based on the results of investigations, the causes of the failures have been evaluated, and the repair methods have been set up as horizontal drains, removal of the dangerous rock, retaining wall with subsurface drains, the elimination of colluvium and slope stabilization by use of precast concrete grids and so on.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.163-170
• /
• 2005

In this paper, the rock bolts, soil nails with filling grout and the micro-piling with injecting grout by pressure were applied for the stabilization of the cut slopes consisting of sedimentary rocks, igneous rocks and metamorphic rocks respectively. The field measurements and 3-D FEM analyses to find out mobilized tensile stresses of the grouted-reinforcing members installed in the drilled holes were executed on each site. With assuming the increments of the cohesive strength in the improved ground, the back analysis using direct calibration approach of changing the elastic modulus of the ground was used to find out the improved elastic modulus which yields the same tensile stresses from field measurements. The results of back analysis show that the elastic modulus of the improved ground were 4 to 6 times as large as the elastic modulus of original ground. Consequently, the design for slope reinforcement to be more rational, it is proposed that not only the improved cohesive strength is to be used in the incremental ranges on well-known previous proposed data, but also the increased elastic modulus which is about 5 times as large as the original elastic modulus is to be considered in design.

• Land and Housing Review
• /
• v.2 no.2
• /
• pp.157-162
• /
• 2011

This paper presents the landslide characteristics occurred in Hoengseong, Gangwondo and around July 16 in 2006, caused by heavy rainfall and antecedent precipitation by two typhoons of Ewiniar and Bilis. The main causes of landslides were antecedent precipitation between July 12 to 13, resulting in weakening grounds by increasing the degree of saturation previously, and the additional heavy rainfall between July 15 to 16. Most of landslides at natural slopes were transitional failures occurred along the boundary between residual weathered soil in shallow depth and hard mother rock. From the results of conclusive analyses for 100 sites in Hoengseong region where landslides occurred, the slope length of landslide and slope width were less than 100m with 87% of frequency and 30m with 74% of frequency, respectively. The average value of slope angles was $24^{\circ}$.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1092-1099
• /
• 2009

Landslide researches are divided to a method of interrelationship for various factors, method of predicting landslide possibility, and method of estimating landslide risk which are occurring landslides in the natural slope. Most of landslides occurred in natural slope are caused by a heavy rainfall in summer season. Weathered soil layer located in upper side of rock mass was occurred. As well as, they are announced to have an influence to geometry, geology, soil characteristics, and precipitation in the natural slope. In order to investigate and interpret the variety of landslides from field investigation to risk analysis, landslide analysis process due to geotechnical and geological opinions are systematically demanded. In this research, the study area is located in Macheon area, Gyeongsangnam-do and performed the landslide investigation. From the results of landslide investigation and analysis, optimized standard model based on natural landslide is proposed to high technical method of landslide investigation and interpretation.

• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.9-17
• /
• 2009

The main purpose of this work is to analyse damages caused by debris flows during the heavy rainfall at Inje province in Kangwondo, Korea. A series of site investigations have been performed to survey the characteristics of debris flows occurred during the summer season of 2006. It has been found that major losses and costs are triggered by discharge of soil and rock fragments from landslides. During the rainfall unexpectedly high precipitation rate of 113.5mm/hour and 355mm/day was recorded, which could happen at a 80-500 year period. Comparing the period of the rainfall with the time of the landslides, it has been found that the occurrence of the landslides is directly related to heavy rainfalls. At present, several debris barriers have been built at the valleys and natural slopes have been protected by the seed spray method. It is intended to propose an appropriate solutions of restoration of landslide damages and maintenance based on findings from the current study.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.20 no.3
• /
• pp.33-43
• /
• 1992

The perceptual characteristic on the slope scenery around highway is very similar as the general perceptual characteristic in the landscape. This process determines by the relationship between the scenery observers and the characteristics of its place. It is very important to have a analysis on highway slope scenery in our particular culture in Korea since our country's highways are done by cutting mountains : therefore, we have a lot of slopes around highways. The physical characteristics on the highway scenery determines how we should build scenery around highway to a satisfactory level. The results drawn from this research work are as follow: 1) The satisfaction for slope scene had been affected by sex, native and experience of travel. I thought that the slope scene having peculiar form will offer the highest satisfaction. 2) Psychological factor, reflected satisfaction of slope scene, 몽 a grip of three factors as the factor of evaluation, texture, formation, and presumption formula is : Satisfaction=1.04(Evauluation factor)+0.83(Texture factor)+0.15(Formation factor)+4.28)R2=0.69). 3) Vine among the vegetation componeents of slope scene highly correlated with the evaluation factor and grass, shrub correlated with the texture factor. 4) Rock among the structual components of slope scene highly correlated with the formation factor, and stockade, lattice correlated with the evalution factor. 5) Gradient among the properties which determined slope form, highly correlated with the formation factor.

• The Journal of Engineering Research
• /
• v.7 no.1
• /
• pp.61-70
• /
• 2005

Conventional geological survey utilizes the manual compass for mass amount of measurements of the geologic structure. Portable multifunction digital compass system was required by more detailed geological survey, due to increasing construction for rock slopes and runnels. In this paper, the system was implemented by using Intel PXA 255 embedded board as a system controller, and was composed of tilting sensor, digital azimuth sensor, and Global Positioning System (GPS) module. After the measured location, strike, and the angle of dip with our implemented system were transmitted to Personal Digital Assistant (PDA) or notebook, these data could be used for geologic structure analysis. It is expected that the availability of cheap and improved digital compass will reduce the coast and time of geological survey extensively.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.2
• /
• pp.33-45
• /
• 2011

The purpose of this study to analyze landslide-triggering factors using the 38 landslide cases occurred by typhoon, Rusa in 2002, Maemi in 2003 and Ewiniar in 2006 and geospatial characteristics in Hamyang and Geochang County. where two day's heavy rainfall was concentrated on. The rainfalls factors to trigger landslides were accumulative rainfall (>230mm) and rainfall intensity(>30-75mm). The highest landslide frequency was concentrated on the areas of 400-900m in height and on the slopes of $25-40^{\circ}$ in degree. The frequency of landslide was high exceedingly above 80% of a slope attitude, while the frequency is very low below 70%. Granite was more susceptible as much as 9 times than metamorphic rocks. In areas mixed soil with gravels and rock blocks, the frequency of landslide was 73%.

• Smart Structures and Systems
• /
• v.22 no.6
• /
• pp.663-673
• /
• 2018

In this study, the effect of particle size on the cracks propagation and coalescence or cracking pattern of the edge notched disc specimens are investigated. Firstly, calibration of PFC3D was performed using Brazilian experimental test output. Then micro parameters were used to build edge notched disc specimen. The horizontal wall of the assembly is let to move downward with a standard low speed of 0.016 m/s. The numerical results show that the tensile cracks are dominant failure pattern for the modeled discs. These tensile cracks initiate from the pre-existing notch tip and propagate parallel to the loading direction then interact with the upper boundary of the modeled specimen. As the size of the balls (ball diameter) decrease the number of tensile cracks increase. The tensile fracture toughness of the samples also decreases as the particle size increases. Understanding the crack propagation and crack coalescence phenomena in brittle materials such as concretes and rocks is of paramount importance in the stability analyses for engineering structures such as rock slopes, underground structures and tunneling.