• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.368-376
• /
• 2010

The bent foundation with single drilled shafts is suitable and economical in South Korea, which has good rock in a shallow depth. This foundation has been designed with an elastic design concept. To apply a plastic design concept written in Korea Bridge Design Criteria, a detail design regulation, which includes the method for a plastic hinge point to occur above the ground, rebar arrangement and soil modelling, should be defined. Soil modelling should be considered in the respect of structural engineer's practicality. In this paper, single drilled shaft piers with 1m diameter are constructed, and cyclic lateral load tests loaded at 4m above the ground are taken to examine the behavior. Reduced diameter shaft above the ground and remaining the steel casing under the ground were used to induce plastic hinge to occur above the ground. Simplified soil models such as elastic relation and p-y curve are adapted, and the prediction results are compared with test results. Prediction results of a model bridge were compared according to soil models with time domain analyses, and design criteria of soil were proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.662-671
• /
• 2020

The uplift force acts directly on the foundation and causes a building to float to the upper ground. To examine the stability of a structure according to the uplift force, four sites (Paju, Anyang, Osan, and Gangneung) were selected, and sensors were installed on the foundations for the field tests. The rainfall characteristics were analyzed around June~September, and the changes in the water level of the adjacent river were considered. The maximum uplift force except for Gangneung did not exceed 72% of the water pressure when the groundwater level was up to the surface. On the other hand, the maximum uplift force in Osan was approximately 67%, but the reliability was slightly inferior because the difference from the average (46%) was large. The minimum uplift force was within 10% except for Anyang (~ 41%). At the Gangneung site on soft rock where the permanent drainage facility was installed before the measurement, the maximum and minimum uplift force was approximately 14% and 3.5%, respectively. Based on the measurement results, the possibility of overdesigning or underdesigning comes from the design by the hydrostatic pressure when the groundwater level is up to the surface.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.305-319
• /
• 2012

The Myeongdongseongdang Cathedral, which was designated as Historic Site No. 258 in Korea, is a representative cathedral of Korean Catholic church designed by a French priest Eugene-Jean Georges Coste and completed in 1898. It is a Gothic-styled architecture constructed with bricks and stones. Lithological and mineralogical analyses determined that holy stone relics were made of marble and granite, and foundation stones are of pink feldspar granite. Deterioration mapping and ultrasonic measurement revealed main weathering and damage were exfoliation (40%) and black discoloration (37%) in the holy water basin, and exfoliation (6%) and discoloration (46%) in the exterior foundation stones. Ultrasonic velocity of the stones were calculated as 3,525m/s in the holy water basin and 2,795m/s in the exterior stones that indicated these stones were sorted into moderately to highly weathered rock. This was resulted from moisture and atmospheric pollutants around the cathedral.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.3
• /
• pp.29-40
• /
• 2023

In this study, we investigated the reinforcing effects of waveform micropiles in a stratigraphic setting comprising buried soil, weathered soil, and weathered rock. We conducted a series of field load tests and determined that waveform micropiles exhibited sufficient bearing capacity through frictional resistance in the soil layer and demonstrated favorable constructability in conditions with deep bedrock layers. Moreover, the vertical stiffness of waveform micropiles was approximately 2.2 times higher than that of conventional micropiles when subjected to the same design load. Pile group load tests comprising conventional and waveform micropiles showed that micropiles with higher stiffness carried a greater proportion of the load. Although there was no significant difference in the bearing capacity between conventional and waveform micropiles under the same design load, waveform micropiles with higher stiffness showed a load-carrying capacity 1.7 to 3.2 times greater than that of conventional micropiles. These findings suggest that waveform micropiles can be effectively used for foundation reinforcement and reduce the risk of foundation failure when increased loads due to modifications such as expansion remodeling are expected.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.389-396
• /
• 1999

In this study compressive and tensile load tests have been performed to investigate reinforcing effect and load transfer mechanism of small diameter piles installed in the foundation soil for the marine suspension bridge. Load tests were carried out on steel plate with diameters of 50cm, 100cm and 150cm varying loads starting from 39 tons up to 314 tons. Small diameter piles were proved to behavior like as friction piles and loads were not transmitted to the bottom of piles. From pull-out tests, the uplift capacity of small diameter piles was largely influenced by reinforcing materials compared to frictional resistance between piles and adjacent soils. The bearing capacity of small diameter piles appeared to be higher than the ultimate bearing capacity evaluated using static formulae. The load carrying capacity of small diameter piles was superior to the bored piles with a similar size. Thus, ultimate bearing capacity estimated from static formulae can provide conservative designs and thereby resulting in economic disadvantages. A further study to accumulate data regarding various soil conditions is recommended for an improved estimation of bearing capacity of piles with small diameter.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.6
• /
• pp.45-56
• /
• 2006

The finite element method is a practical tool to compute the response of the irregularly layered soil deposit to the base-rock motions. The method is useful not only in estimating the interaction between the structure and the surrounding soil as a whole and the local behavior of the contacting area in detail, but also in predicting the resulting behavior of the superstructure affected by such soil-structure interactions. However, the computation of finite element analysis is marched in the time domain (TD), while the site response analysis has been carried out mostly in the frequency domain (FD) with equivalent linear analysis. This study is intended to compare the results of the TD and FD analysis with focus on the peak response accelerations and the predominant frequencies, and thus to evaluate the applicability and the validity of the finite element analysis in the site response analysis. The comparison shows that one can obtain the results very close to that of FD analysis, from the finite element analysis by including sufficiently large width of foundation in the model and further by applying partial mode superposition. The finite element analysis turned out to be well agreeing with FD analysis in their computed results of the peak acceleration and the acceleration response spectra, especially at the surface layer.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.70-77
• /
• 2010

In this paper, a case study of drivability and bearing capacity of large diameter steel pipe piles at PTT LNG site in Thailand is introduced. The LNG facilities were designed to be founded on steel pipe pile foundations driven into the weathered rock formation overlaid by sand layers. The drivability analyses of open ended pipe piles were carried out using GRL WEAP program and the bearing capacities of the piles were estimated. Dynamic load tests were performed to evaluate end bearing resistance, and it is shown that the measured end bearing resistance is smaller than the calculated end bearing because the plugging does not develop sufficiently in case of large diameter pipe piles.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.281-287
• /
• 2003

A Natural cavities were found at shallow depth during construction of a huge bridge in Moon-Kyung, Korea. The distribution patterns of cavities in the Moon-Kyung limestone were investigated carefully with a supplementary field job such as a structural geological survey, a geophysical survey, and a rock mechanical test in laboratory or field. A structural geological mapping produced a detail geological map on this area. It suggested that there were three faults in this area, and these faults had an influence on the mechanism of natural cavities. Among many kinds of geophysical surveys, an electrical resistivity prospecting was applied firstly on the specific area that was selected by results from the geological survey. Many evidences for cavities were disclosed from this geophysical data. Therefore, a seismic tomography was tested on the target area, which was focused by results from the electrical resistivity prospecting and was believed to have several large cavities. A distinct element numerical simulation using the UDEC was followed on the target area after completing all of field surveys. Data from field tests were directly dumped or extrapolated to numerical simulations as input data. It was verified from numerical analysis that several natural cavities underneath the foundation of the bridge should be reinforced. Based on the project result, finally, most of foundations for the bridge were re-examined and the cement grouting reinforcement was constructed on several foundations among them.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.281-284
• /
• 2008

Due to the remarkable development of the GIS and spatial information technology, the information on the national land and scientific management are disseminated. According to the result of research for an efficient analysis of forest site, it presents distinguishing of satellite image and methodology of TPI (Topographic Position Index). The prediction of forest site distribution through this research, specified Gyeongju-si area, gives an effect to distinguishing honor system through Quickbird image with the resolution 0.6m. Furthermore it was carried out through TPI grid that is abstracted by DEM, slope of study area and type of topography, as well as it put its operation on analysis and verification of relativity between the result of prediction on forest site distribution and the field survey report. It distinguishes distribution of country rock that importantly effects to producing of soil, using 1: 5000 forest maps and grasping distribution type of soil using satellite image and TPI, it is supposed to provide a foundation of the result on prediction of forest site. With the GIS techniques of analysis, inclination of discussion, altitude, etc, and using high resolution satellite image and TPI, it is considered to be capable to provide more exact basis information of forest resources, management of forest management both in rational and efficient.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.139-152
• /
• 1999

These days we broadly apply drilled shafts for deep foundations to build infrastructures. The defects of the deep foundations cause the decrease of their support load capacity and the increase of settlement, and the subsequent damage of the super-structures. In consequence, non-destructive testings techniques of concrete piles are important for their integrity evaluation. To improve understanding and reliable application of the impact echo method for the integrity evaluation of the drilled concrete piles, numerical studies of the impact response of concrete piles by using axi-symmetric three-dimensional finite element method are peformed for (a) sound piles: (b) piles containing necks, voids and layers of low-quality concrete: and (c) piles in soil and/or above rock. The results of these studies show that the finite element method is effective for evaluating the impact response of drilled concrete piles.