• Tunnel and Underground Space
• /
• v.11 no.4
• /
• pp.362-367
• /
• 2001

The stiff top layer in a soil profile, which can happen in winter, may change the isolation effect of the wave barrier. The research scope of this paper is the investigation of the propagation of surface waves in layered soil with a stiff layer on its top, and the isolation effect of the solid stiff wave barrier. The investigations have been performed numerically by the Boundary-Element Method as a two-dimensional problem. A strip foundation vibrated harmonically in vertical direction was considered as the vibration source. Three soil profiles, a homogeneous half-space, two profiles with different thickness of stiff top layer, with two different types of wave barriers were investigated. The profiles with a stiff top layer show considerable reductions of the amplitude of the vibration in comparison to the homogeneous soil profile. The layered soil profiles with a stiff top layer do not show wave propagation velocities as high as they are expected from the material properties. Furthermore the vibration amplitudes in a frozen soil are much smaller with distance than in a non-frozen soil.

• Journal of the Korean Professional Engineers Association
• /
• v.24 no.6
• /
• pp.97-105
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ø70mm on the calcalious sand stone (soft-moderate-semi hard Rock). The total numbers of fire blast were 88 round. Scale distance were induces 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagation Law in Blasting Vibration (Equation omitted) where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum Charge per delay-period of eighit milliseconds o. more(kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity D / W$^n$ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three graups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge per delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over 100m distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30 ‥‥‥under 100m ‥‥‥V=41(D/$^3$√W)$\^$-1.41/ ‥‥‥A Over 100 ‥‥‥‥under 100m ‥‥‥V=121(D/$^3$√W)$\^$-1.56/ ‥‥‥B K value on the above equation has to be more specified for furthur understang about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• Journal of the Korean Geographical Society
• /
• v.50 no.5
• /
• pp.505-514
• /
• 2015

This study analyzes a correlation between water content values and chemical index of alteration (CIA) for coarse sedimentary rocks of Mt. Cheonsaeng in Gumi-si, Kyeongsangbuk-do. Through measurement of various water values of 20 samples including water content rate, water absorption rate and equipment measuring we comparatively analyzed the values with CIA of the samples obtained by X-ray fluorescence. As a result of analysis water content rate and water absorption rate in a sedimentary rock are likely to be higher when matrix is psephitic and less compact. Furthermore the higher water content rate is, the higher CIA is due to increase of $SiO_2$ and $Al_2O_3$ and decrease of CaO and $Na_2O$ derived by chemical weathering of felspar. This correlation between water content rate and CIA represents a similar result with previous studies targeting granite.

• Tunnel and Underground Space
• /
• v.11 no.2
• /
• pp.174-181
• /
• 2001

The cavities created by underground mining, if remained unfilled, can cause ground settlement and surface subsidence as a result of relaxation and breakdown of the carven roof. Construction of structures above the underground mine cavity will have serious problems concerning both structural stability and safely even if the cavity is back-filled. This study was conducted to confirm the location and condition of the cavern as well as the state of the back-fill in A mine area using core logging and borehole camera. The bearing capacity and other mechanical properties of the ground were also measured by the standard penetration test(SPT). Obtained data were used to assess the stability of the ground and the structures to be built by numerical analysis using FLAC. The site investigation results showed that the mine cavities were filled with materials such as boulder and silty sand(SM by unified classification). Result of the numerical analyses indicated that constructing building structures on the over-lying ground above the filled cavities is secure against the potential problems such as surface subsidence and ground settlement.

• Explosives and Blasting
• /
• v.9 no.4
• /
• pp.3-12
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M /S delay caps. Drill depth was from 3m to 6m with Crawler Drill 70mm on the calcalious sand stone (soft-moderate-semi hard Rock) . The total numbers of feet blast were 88. Scale distance were induces 15.52-60.32. It was applied to Propagation Law in blasting vibration as follows .Propagtion Law in Blasting Vibration V=k(D/W/sup b/)/sup n/ where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W ; Maximum Charge per delay -period of eight milliseconds or more(Kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity D/W/sup b/ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three groups. Cabic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over loom distance because the frequency is varified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m--under 100m----V=41(D/ W)/sup -1.41/-----A Over l00m---------V=121(D/ W)/sup -1.56/-----B K value on the above equation has to be more specified for furthur understand about the effect of explosives. Rock strength, And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• Tunnel and Underground Space
• /
• v.29 no.1
• /
• pp.1-11
• /
• 2019

This study investigated use cases of machine learning technology in domestic medical, manufacturing, finance, automobile, urban sectors and those in overseas mining industry. Through a literature survey, it was found that the machine learning technology has been widely utilized for developing medical image information system, real-time monitoring and fault diagnosis system, security level of information system, autonomous vehicle and integrated city management system. Until now, the use cases have not found in the domestic mining industry, however, several overseas projects have found that introduce the machine learning technology to the mining industry for improving the productivity and safety of mineral exploration or mine development. In the future, the introduction of the machine learning technology to the mining industry is expected to spread gradually.

• Structural Monitoring and Maintenance
• /
• v.4 no.1
• /
• pp.17-31
• /
• 2017

Since extensometers are used to determine the absolute deformation of foundation and abutments and all results are obtained in reference to the base rod, the accuracy of these results has been constantly a subject of debate. In this regard, locating and installing extensometers outside the range of effect zone is also another challenge. The main purpose of this paper is to investigate and modify extensometers results based on the mentioned issues. For this aim, the concrete RCC Zhaveh dam in Iran was selected as the case study. To study the results of extensometers installed in this dam, first, the 3DEC_DP 5.00 software was applied for numerical modeling. Parameters such as discontinuities, dead load and piezometric pressure in the interface of concrete and rock were considered. Next, using the results obtained from 6 extensometers in foundation and abutments and 4 clinometers in dam body, the numerical model was calibrated through back analysis method. The results indicate that the base rod is moved and is not recommended being used as the base point. In other words, because installation of base anchor outside the range of effect zone is not possible due to the operational and economic considerations, the obtained results are not accurate enough. The results indicate a considerable 2-3 mm displacement of the base rod (location of the base anchor) in reference to the real zero point location, which must be added to the base rod results.

• Earthquakes and Structures
• /
• v.14 no.2
• /
• pp.167-178
• /
• 2018

A roller compacted concrete (RCC) dam should be analyzed under seismic ground motions for different conditions such as empty reservoir and full reservoir conditions. This study presents three-dimensional earthquake response and performance of a RCC dam considering materially non-linearity. For this purpose, Cine RCC dam constructed in Aydın, Turkey, is selected in applications. The three-dimensional finite element model of Cine RCC dam is obtained using ANSYS software. The Drucker-Prager material model is considered in the materially nonlinear time history analyses for concrete and foundation rock. Furthermore, hydrodynamic effect was investigated in linear and non-linear dynamic analyses. Researchers observe that how the tensile and compressive stresses change by hydrodynamic pressure effect. The hydrodynamic pressure of the reservoir water is modeled with the fluid finite elements based on the Lagrangian approach. In this study, dam body and foundation are modeled with welded contact. The displacements and principle stress components obtained from the linear and non-linear analyses with and without reservoir water are compared each other. Principle stresses during earthquake were obtained at the most critical point in the upstream face of dam body. Besides, the change of displacements and stresses by crest length were investigated. Moreover demand-capacity ratio criteria were also studied under linear dynamic and nonlinear analysis. Earthquake performance analyses were carried out for different cases and evaluated. According to linear and nonlinear analysis, hydrodynamic water effect is obvious in full reservoir situation. On the other hand, higher tensile stresses were observed in linear analyses and then non-linear analyses were performed and compared with each other.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.2
• /
• pp.196-219
• /
• 2019

According to the Samguk Yusa, the nine-story wooden pagoda at Hwangnyongsa Temple was built by a Baekje artisan named Abiji in 645. Until the temple was burnt down completely during the Mongol invasion of Korea in 1238, it was the greatest symbol of the spiritual culture of the Korean people at that time and played an important role in the development of Buddhist thought in the country for about 700 years. At present, the only remaining features of Hwangnyongsa Temple, which is now in ruins, are the pagoda's stylobate and several foundation stones. In the past, many researchers made diverse inferences concerning the restoration of the original structure and the overall architecture of the wooden pagoda at Hwangnyongsa Temple, based on written records and excavation data. However, this information, together with the remaining external structure of the pagoda site and the assumption that it was a simple wooden structure, actually suggest that it was a rectangular-shaped nine-story pagoda. It is assumed that such ideas were suggested at a time when there was a lack of relevant data and limited knowledge on the subject, as well as insufficient information about the technical lineage of the wooden pagoda at Hwangnyongsa Temple; therefore, these ideas should be revised in respect of the discovery of new data and an improved level of awareness about the structural features of large ancient Buddhist pagodas. This study focused on the necessity of raising awareness of the lineage and structure of the wooden pagoda at Hwangnyongsa Temple and gaining a broader understanding of the structural system of ancient Buddhist pagodas in East Asia. The study is based on a reanalysis of data about the site of the wooden pagoda obtained through research on the restoration of Hwangnyongsa Temple, which has been ongoing since 2005. It is estimated that the wooden pagoda underwent at least two large-scale repairs between the Unified Silla and Goryeo periods, during which the size of the stylobate and the floor plan were changed and, accordingly, the upper structure was modified to a significant degree. Judging by the features discovered during excavation and investigation, traces relating to the nine-story wooden pagoda built during the Three Kingdoms Period include the earth on which the stylobate was built and the central pillar's supporting stone, which had been reinstalled using the rammed earth technique, as well as other foundation stones and stylobate stone materials that most probably date back to the ninth century or earlier. It seems that the foundation stones and stylobate stone materials were new when the reliquaries were enshrined again in the pagoda after the Unified Silla period, so the first story and upper structure would have been of a markedly different size to those of the original wooden pagoda. In addition, during the Goryeo period, these foundation stones were rearranged, and the cover stone was newly installed; therefore, the pagoda would seem to have undergone significant changes in size and structure compared to previous periods. Consequently, the actual structure of the original wooden pagoda at Hwangnyongsa Temple should be understood in terms of the changes in large Buddhist pagodas built in East Asia at that time, and the technical lineage should start with the large Buddhist pagodas of the Baekje dynasty, which were influenced by the Northern dynasty of China. Furthermore, based on the archeological data obtained from the analysis of the images of the nine-story rock-carved pagoda depicted on the Rock-carved Buddhas in Tapgok Valley at Namsan Mountain in Gyeongju, and the gilt-bronze rail fragments excavated from the lecture hall at the site of Hwangnyongsa Temple, the wooden pagoda would appear to have originally been an octagonal nine-story pagoda with a dual structure, rather than a simple rectangular wooden structure.

• Land and Housing Review
• /
• v.5 no.2
• /
• pp.115-120
• /
• 2014

Site coefficient and amplification factor of current domestic Seismic Design Code (KBC-2009) have no consideration for the domestic ground condition in which the base rock is normally placed within 30m form the surface. Accordingly, in this study dynamic centrifugal test and analysis for pile foundation into clay were achieved. and the response spectrums of free surface and basement were compared with each other. Within the period 1sec., the measured spectral acceleration of free surface and basement was bigger than the design spectral acceleration of SC and SD site. However the measured spectral acceleration of free surface and basement for the period over 1.5sec. was smaller than the design spectral acceleration of SC site. There was no severe difference of spectral acceleration according to the upper structure, embedded depth of foundation and free surface conditions. Consequently, normal domestic apartment housing for the period range over 1.5sec. could be design more economically applying these test result.