• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1700-1703
• /
• 1997

The flexibility of the manipulator inevitably inducess the vibration at the end effector. For the increase in speed and accuracy at the end tip, in this work, position and vibration control of a flexible manipuator with a separate voice coil type actrator for vibration suppression, is studied. The flexible manipulator with a tip mass is modeled an Euler-Bernoulli beam. An H.inf. controller is designed in order to make the controlled system robust against unmodeled higher-order mode vibration of the manipulator, output sensor noise, and etc. Simulations and experiments show that the modeling of the system is valid and that robust vibration control of the flexible manipulator is efficiently achieved.

• 전기학회논문지
• /
• 제57권4호
• /
• pp.610-616
• /
• 2008

This paper presents a new robust sensorless control system for high performance induction motor drives fed by a matrix converter with variable structure. The lumped disturbances such as parameter variation and load disturbance of the system are estimated by a variable structure approach based on model reference adaptive scheme. A Reduced Order Extended Luenberger Observer(ROELO) is also employed to bring better responses at the low speed operation. Experimental results are shown to illustrate the performance of the proposed system.

• 한국지능시스템학회논문지
• /
• 제8권4호
• /
• pp.62-68
• /
• 1998

본 연구에서는 유도모터 드라이브의 파라미터변동 및 외란의 효과를 고려한 속도 제어기를 설계하였다. 제안된 퍼지 P-I 제어기는 원하는 속도 추종사양에 합치되도록 설계되었으며 외란에 기인된 파라미터 변동의 영향을 최소화 하기위해 퍼지 가중행력을 이용한 견실제어기를 구성하였다. 드라이브의 원하는 속도 추종 제어성은 넓은 동작 범위내에서 지속되었으며 양호한 속도 성능을 모의 실험에 의해 확인 하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권2호
• /
• pp.551-559
• /
• 2015

This paper's focus is in reducing the torque ripple and increasing the average torque by optimizing switching angles of 8/6 switched reluctance motor while implementing a robust speed controller in the outer loop. The mathematical model of the machine is developed and it is simulated using MATLAB/Simulink. An objective function and constraints are formulated and Optimum turn-on and turn-off angles are determined using Particle swarm optimization and Genetic Algorithm techniques. The novelty of this paper lies in implementing sliding mode speed controller with optimized angles. The results from both the optimization techniques are then compared with initial angles with one of them clearly being the better option. Speed response is compared with PID controller.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.175-178
• /
• 2002

In a conventional speed sensorless Stator Flux Oriented(SFO) induction machine drive system, the estimated speed is delayed in transients by the use of a low pass filter(LPF). To prevent extreme overshoot caused by this delay, PI controller gains should be small, which consequently is greatly affected by disturbance torque. In this paper, by taking advantage of disturbance torque observer and feedforward control, robust speed controller is designed for speed sensorless SFO system. The proposed method is verified by the simulation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1088-1090
• /
• 2002

This paper described a robust control of an induction motor using a disturbance cancellation observer of a feedforward control. The speed response of conventional PI controller characteristic is affected by variations of load torque disturbance. In the proposed system. the speed control characteristic using a feedforward control isn't affected by a load torque disturbance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.150-153
• /
• 2002

This paper designed a robust control of an induction motor using a disturbance cancellation observer of a feedforward control. The speed response of conventional Pl controller characteristic is affected by variations of load torque disturbance. In the proposed system the speed control characteristic using a feedforward control isn't affected by a load torque disturbance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.816-819
• /
• 2003

This paper described a robust control of an induction motor using a disturbance cancellation observer of a feedforward control with Matlab simulink. The speed response of conventional PI controller characteristics is affected by variation of load torque disturbance. In this system, the speed control characteristics using a feedforward control toughen about a load torque disturbance.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권3호
• /
• pp.369-378
• /
• 1999

This paper presents position control of an electro-hydraulic servo system whoch is operated by four 2-2way high speed on-off valves with either PWM PID control method or sliding mode control method, The advantages of using high speed on-off valves instead of electo-hydraulic servo valves or electro-hydraulic proportional valves are low price robustness for oil contamination and direct control without a D/A converter. The system consists of load cylinder inertia car potentiometer and external load cylinder. The experiments were carried out under several conditions and the results were compared. As a result the sliding mode method has shown good control performance and the robust and stable positioning of the elector-hydraulic servo system can be achieved accurately.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2015-2017
• /
• 1998

This paper deals with the design of a field oriented control system model for the high performance induction motor using Matlab with Simulink. The proposed control system model, which is not used the speed and flux sensor, contains IM model, Tranformation, Decoupling, FFOC(Field Flux Orientation Controller), Torque calculator and PI Controller to control speed, torque. Results present the stator and rotor flux phasor trajectory, the startup and transient response of speed, torque and stator current with field oriented control and the response to changes in reference speed with no load. This paper shows that the propose control system is more robust than other vector control system, and suggest the enchanced model, using Matlab with Simulink for the high performance in induction motor control.