• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.143-157
• /
• 1994

This paper is concerned with the position control of electrohydraulic servo system under parameter variation. An adaptive sliding mode control which uses the direct parameter estimation scheme, is proposed to design a robust controller for fast and accurate control of the system. It is shown that the adaptive sliding mode control algorithm is robust and effective in attaining fast and accurate position control of system under time-dependent parameter variation. It is also shown experimentally that chattering phenomena in a sliding mode control can significantly be reduced by using boundary layer technique, and that new approach in sliding mode control introducing a term proportional to the distance between the current state and the sliding surface in the control law is effective to obtain fast response and to increase stability of the system. Computer simulation on the dynamic performance of the control system is also presented.

• 제어로봇시스템학회논문지
• /
• 제11권1호
• /
• pp.27-33
• /
• 2005

The purpose of this research is to improve the reliability of automobile navigation system that utilizes the magnetic compass for localization. On account of its sensitiveness against the dynamic external interference of the magnetic field, the electronic compass itself is not accurate enough to be used for the localization compared to the gyro-compass. To overcome this shortcoming, in this research, a robust electronic compass is designed by using two magnetic compasses to cancel out the dynamic interences efficiently. That is, a dual compass predictive calibration algorithm against irregular external interference of magnetic field is newly proposed and implemented in this paper. When the dynamic interference can be eliminated from the electronic compass, it becomes much accurate than the gyro-based system that suffers from the accumulative drift error. The reliability and performance of the designed system have been verified through the real driving experiments.

• Journal of Communications and Networks
• /
• 제14권3호
• /
• pp.237-242
• /
• 2012

One of the major problems for accurate channel estimation in power line communication systems is impulsive noise. Traditional channel estimation algorithms are based on the assumption of Gaussian noise, or the need to locate the positions of impulsive noise. The algorithms may lose optimality when impulsive noise exists in the channel, or if the location estimation of impulsive noise is inaccurate. In the present paper, an effective channel estimation algorithm based on a robust cost function is proposed to mitigate impulsive noise. The proposed method can provide a closed-form solution, and the application of robust estimation theory enables the proposed method to be free from localization of impulsive noise and thus can guarantee that the proposed method has better performance. Simulations verified the proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1814-1819
• /
• 2004

The purpose of this research is to improve the reliability of automobile navigation system that utilizes the magnetic compass for localization. On account of its sensitiveness against the dynamic external interference of the magnetic field, the electronic compass itself is not accurate enough to be used for the localization compared to the gyro-compass. To overcome this shortcoming, in this research, a robust electronic compass is designed by using two magnetic compasses to cancel out the dynamic interferences efficiently. That is, a dual compass predictive calibration algorithm against irregular external interference of magnetic field is newly proposed and implemented in this paper. When the dynamic interference can be eliminated from the electronic compass, it becomes much accurate than the gyro-based system that suffers from the accumulative drift error. The reliability and performance of the designed system have been verified through the real driving experiments.

• 제어로봇시스템학회논문지
• /
• 제7권3호
• /
• pp.198-208
• /
• 2001

In this paper, vibration suppression of an elastic beam fixed on a moving cart and carrying a fixed or moving mass is considered. A modified pulse sequence method with RIC(Robust Internal-loop Compensator) is proposed to suppress the single model residual vibration and to get accurate positioning of the beam-mass-cart system. The performance of the proposed input preshaping method is compared with that of the previous ones through simulations and experiments. Using the proposed method, it is able to suppress the initial vibration of the beam-mass-cart system carrying a concentrated mass. Accurate PTP(point-to-point) positioning of the moving mass without residual vibration is also obtained experimentally by modifying the proposed pulse sequence method. Finally, the proposed input preshaping method is applied successfully to the system to follow square trajectories of the moving mass without residual vibration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1337-1338
• /
• 2015

In this paper, a new control technique using WIPDC(Weighted Integral Parallel Distributed Compensation) and ISMC(Integral Sliding Mode Control) is proposed for high performance and robust trajectory tracking control of a wheeled mobile robot. The WIPDC reduces the steady-state error by adding a weighted integral controller to the PDC. So, the trajectory tracking control using the WIPDC can obtain more accurate control performance than the PDC. And the ISMC based control input gives the mobile robot to preserve the system dynamics controlled by the WIPDC control input in spite of external disturbances. Therefore, the proposed control method shows a robust and precise trajectory tracking performance.

• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.40-46
• /
• 2004

Magnetic bearing has been adopted to support a rotor by electromagnetic force without mechanical contact and lubrication process. The recent growth of magnetic bearing applications in many industrial fields requires more accurate design of bearing-rotor system. Due to external forces and uncertainties of magnetic bearing system the actual performance and stability my be worse than it is designed. This paper describes the governing equations of rotor magnetic bearing systems and/or the designing of robust controller via standard $H_{\infty}$ control problem. The system stability and response characteristics are studied by simulations and verified with experimental results.

• 동력기계공학회지
• /
• 제18권4호
• /
• pp.97-103
• /
• 2014

In this paper, the authors consider a robot motion control to cope with painting, welding jobs and etc. Especially, a method for easy recognition and regeneration of the robot motions made by the operator is proposed. The method is based on the process of accurate modelling, controller design and experimental evaluation. In this study, the model and controller for all motions are obtained individually, where the control system is designed on the robust control framework. And the experiment result with good control performance is presented.

• 한국정보보호학회:학술대회논문집
• /
• 한국정보보호학회 2006년도 하계학술대회
• /
• pp.133-137
• /
• 2006

In iris recognition, iris segmentation plays a very important role because its accuracy affects directly to the performance of the whole system. This paper proposes a new approach for segmenting iris that is fast, accurate and especially robust to occlusion and illumination. In this method, a circular filter is used for detecting the center of the inner circle. Then, a technique to linearize the limbus is applied and the limbus is detected using a linear filter. Experimental results show that the proposed method has promising performance for improving the iris recognition accuracy.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.234-240
• /
• 2016

We propose a novel framework for markerless camera-based games. By using a visual camera, our method may yield robust human body segmentation with high performance comparable to the segmentation using depth cameras. The edges of human bodies are detected by subtracting gradient backgrounds, and human body regions are segmented by the operations based on mathematical morphology. Collisions between detected regions and virtual objects are determined by finding the colliding time using intra-frame positions of virtual objects. Experimental results show that the proposed method may produce robust segmentation of human bodies, thereby and the collision responses are more accurate than previous methods. Therefore, the proposed framework can be widely used in camera-based games requiring high performance.