• 제어로봇시스템학회논문지
• /
• 제21권1호
• /
• pp.65-69
• /
• 2015

A vision-based blank alignment unit for a press automation line is introduced in this paper. A press is a machine tool that changes the shape of a blank by applying pressure and is widely used in industries requiring mass production. In traditional press automation lines, a mechanical centering unit, which consists of guides and ball bearings, is employed to align a blank before a robot inserts it into the press. However it can only align limited sized and shaped of blanks. Moreover it cannot be applied to a process where more than two blanks are simultaneously inserted. To overcome these problems, we developed a press centering unit by means of vision sensors for press automation lines. The specification of the vision system is determined by considering information of the blank and the required accuracy. A vision application S/W with pattern recognition, camera calibration and monitoring functions is designed to successfully detect multiple blanks. Through real experiments with an industrial robot, we validated that the proposed system was able to align various sizes and shapes of blanks, and successfully detect more than two blanks which were simultaneously inserted.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.49-54
• /
• 1992

A flexible robotic assembly cell is modeled using Petri net. A simulator is developed and used to predict the optimal status of the system. The assembly cell of flexible manufacturing system(FMS) pilot plant of Automation and Systems Research Institute(ASRI) in Seoul National University is modeled. The system consists of 3 robots, 4 conveyors, automatic guided vehicle(AGV) and auto-stacker. The simulator is programmed in Turbo C on IBM PC, supporting a simple graphic simulation with pull-down menu. The flexibility of the assembly cell in the FMS plant is guaranteed, since it is possible to predict the optimal status of the system using this simulator.

• 한국정밀공학회지
• /
• 제13권7호
• /
• pp.78-89
• /
• 1996

This paper discusses automation of a small-scale hydraulic shovel and its trajectory control. To move an end-effect (grinder) along a desired trajectory, the controller uses PID(proportional-integral- defferential) control and internal pressure of hydraulic cylinder. To apply PID control in the present hydraulic system, the system model is derived physically and its system parameters are obtained by actual measurement. To show the effectiveness of the PID controller and propriety of system model, the computer simulations and experiments are performed. These results of the simulations and experiments indicate that the PID trajectory control of robotic deburring by hydraulic shovel is very effective.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1541-1544
• /
• 1997

The rehailitation robot, one of the service robot, is the important area in the service automation. In the paper, we describe the overall configuration of KARES(KAIST Rehabilitation Engineering System), which is an intellingent rehabilitaion robotic system designed to assist the independent livelihood of the handicapped and the eldrly. KARES consists of the 6 degree of freedom robot arm mounted on a wheelchair, the controller ofr the arm, sensors to perceive environment, and user interface. Basic desired hobs in KARES are gripping the target object and moving it to the user's face for eating, drinking, or cooperation work wiht the mouth. Currently, the manual operation of the arm is available for gripping to target objects. The autonomous functionality will be ginven for the facilities of the human operator.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.235-239
• /
• 2009

As robotic technologies have become more actively utilized to automate many construction tasks, they have been able to improve the construction productivity, quality, and worker's safety on site. A new advanced system, Robot-based Construction Automation (RCA) system, is currently being developed. To accomplish RCA system effectively, Design for automation (DFA) should be performed in automation system developing phase. The performance criteria of this system are a major cause of design changes. It is required exhaustive review for development new system. This research analyzed the design changes of Climbing Hydraulic Robot system and Construction Factory (CF), being currently developed in the field of applied RCA systems. And the design change matters according to performance criteria in each system's design-by-step were analyzed. The purpose of this research is developing the performance criteria in the developing phase of RCA system, and then will be served as basis for system design in similar projects.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1121-1125
• /
• 2004

The RT(Robot Technology) has been developed as the next generation of a future technology. According to the 2002 technical report from Mitsubishi R&D center, IT(Information Technology) and RT(Robotic Technology) fusion system will grow five times larger than the current IT market at the year 2015. Moreover, a recent IEEE report predicts that most people will have a robot in the next ten years. RCP(Robotic Cellular Phone), CP(Cellular Phone) having personal robot services, will be an intermediate hi-tech personal machine between one CP a person and one robot a person generations. RCP infra consists of $RCP^{Mobility}$, $RCP^{Interaction}$, $RCP^{Integration}$ technologies. For $RCP^{Mobility}$, human-friendly motion automation and personal service with walking and arming ability are developed. $RCP^{Interaction}$ ability is achieved by modeling an emotion-generating engine and $RCP^{Integration}$ that recognizes environmental and self conditions is developed. By joining intelligent algorithms and CP communication network with the three base modules, a RCP system is constructed. Especially, the RCP interaction system is really focused in this paper. The $RCP^{interaction}$(Robotic Cellular Phone for Interaction) is to be developed as an emotional model CP as shown in figure 1. $RCP^{interaction}$ refers to the sensitivity expression and the link technology of communication of the CP. It is interface technology between human and CP through various emotional models. The interactive emotion functions are designed through differing patterns of vibrator beat frequencies and a feeling system created by a smell injection switching control. As the music influences a person, one can feel a variety of emotion from the vibrator's beats, by converting musical chord frequencies into vibrator beat frequencies. So, this paper presents the definition, the basic theory and experiment results of the RCP interaction system. We confirm a good performance of the RCP interaction system through the experiment results.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.580-589
• /
• 2014

Demands for automation in the cell production process of IT products are becoming increasingly sophisticated. In particular, the dual-arm robot has drawn attention as a solution because it has a flexibility and works similarly to humans. In this paper, we propose an automation system for cellular phone packing processes using two dual-arm robots. Applied robots are designed with specifications to meet the requirements of cellular phone packing jobs. In addition, a robotic cell production system is proposed by applying a method of task allocation for efficient packing of cellular phones. Specifically, a task is assigned to reduce takt-time and to avoid collision between two robots. Finally, we discuss some experimental results that include the packing job of five unit boxes with seven kinds of accessories.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.699-702
• /
• 2000

The automation and control of robotic welding process is a very complex assignment because the system is affected by a number of variables which are very difficult to determine or predict in practice. Not only the optimization of the robotic welding process is considered from the point of view of the time and the cost of manufacturing. as well as quality of the weldment. the human factors of the production and many other factors must taken into consideration. hi order to determine the optimal parameters of robotic welding process, it is necessary to build a computer model representing all parameters influencing the welding process as well as the mutual dependence between them. This paper presents an approach to modeling the robotic welding process in which all parameters affecting the welding process are included using a neural network. A detailed analysis of the simulation results has been carried out to evaluate the proposed neural network model.

• International Journal of Control, Automation, and Systems
• /
• 제6권1호
• /
• pp.101-108
• /
• 2008

The transposed Jacobian is proposed to transform the control space from task space to joint space, in this paper. Instead of inverse Jacobian, the transposed Jacobian is preferred to avoid singularity problem, short real time calculations and its generality to apply for rectangular Jacobian. On-line Jacobian identification is proposed to cancel parametric errors produced by D-H parameters of manipulator. To identify Jacobian, the joint angles and the end-effector position are measured when tracking a desired trajectory in task space. Stability of control system is analyzed. The control system is simulated for position control of a two-link manipulator driven by permanent magnet dc motors. Simulation results are shown to compare the roles of inverse Jacobian and transposed Jacobian for transforming the control space.

• 제어로봇시스템학회논문지
• /
• 제22권8호
• /
• pp.590-596
• /
• 2016

Biopsy is a typical needle type intervention procedure performed under radiographic image equipment such as computed tomography (CT) and cone-beam CT. This minimal invasive procedure is a simple and effective way for identifying cancerous condition of a suspicious tissue but radiation exposure for the patients and interventional radiologists is a critical problem. In order to overcome such trouble and improve accuracy in targeting of the needle, there have been various attempts using robot technology. Those devices and systems, however, are not for full procedure automation in biopsy without consideration for tissue sampling task. A robotic end-effector of a master-slave tele-operated needle type intervention robot system has been proposed to perform entire biopsy procedure by the authors. However, motorized sampling adopted in the device has different cutting speed from that of biopsy guns used in the conventional way. This paper presents the design of a novel robotic mechanism and protocol for the automation of biopsy procedure using spring-triggered biopsy gun mechanism. An experimental prototype has been successfully fabricated and shown its feasibility of the automated biopsy sequence.