• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.240-242
• /
• 2002

Recently, most machineries have been small size and mobile type. And human body insertion type endoscope and micro robot technology has been developed. Then the motors used in this field are developed in micro size such as about 2mm in diameter. The structure of this motor is similar to a general brushless DC(BLDC) motor but because of small size there is no position sensor such as hall sensor. In this paper, we propose synchronous driving method for micro BLDC motor without position sensor. We design and manufacture this driver and perform experiment to show the effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.254-254
• /
• 2000

This paper presents a genetic programming based evolutionary strategy for on-line adaptive learnable evolvable hardware. genetic programming can be useful control method for evolvable hardware for its unique tree structured chromosome. However it is difficult to represent tree structured chromosome on hardware, and it is difficult to use crossover operator on hardware. Therefore, genetic programming is not so popular as genetic algorithms in evolvable hardware community in spite of its possible strength. We propose a chromosome representation methods and a hardware implementation method that can be helpful to this situation. Our method uses context switchable identical block structure to implement genetic tree on evolvable hardware. We composed an evolutionary strategy (or evolvable hardware by combining proposed method with other's striking research results. Proposed method is applied to the autonomous mobile robots cooperation problem to verify its usefulness.

• The Journal of Korea Robotics Society
• /
• v.4 no.3
• /
• pp.250-256
• /
• 2009

Suppressing residual vibrations of flexible materials cheaply is an important issue to increase productivity of automated factory using wafer or glass handling robots. In this paper, we present Linux/RTAI-based implementation of input shaping control for reducing residual vibrations of a mechanical system. Experimental results show that residual vibrations of the mechanical system are reduced up to 82% at a point-to-point linear motion.

• Journal of Power System Engineering
• /
• v.14 no.3
• /
• pp.64-70
• /
• 2010

In this study, designing of precise linear transferring device which can be applied to industrial machine and robot industry has been introduced. The direction of power flow and output feature are similar to current Rack-Pinion type. However, unlimited length extensity via rack modulizing, and securing high velocity transportation have been realized by applying Pin-Pinion Gear type at the operation part. The analysis has been calculated to obtain the Pin-Pinion Gear's optimized tooth profile. As a result of research, it is impossible to control precisely even overlap at the teeth of involute and sprocket. Because they have peculiar gearing structure. Therefore, modified cycloid tooth has been proposed to perform high velocity, precise control without backlash.

• Journal of Welding and Joining
• /
• v.12 no.3
• /
• pp.18-25
• /
• 1994

최근 건축용 강구조물이 초대형화 및 초고층화됨에 따라 용접물량의 급증하고 있으나 3D 직종에 대한 회피현상으로 용접기능자의 감소 및 인건비의 급증 등으로 인하여 건축용 강 구조물 제작시 경쟁력이 갈수록 저하되고 있다. 이에 대한 자구책으로 강 구조물 제작업체에서는 생산 성을 한층 배가 시킬 수 잇는 용접시공 기술을 자체 개발하거나 외부로부터 도입하고 있다. 본 보에서는 당사를 비롯하여 여러 업체에서 최근 개발된 용접기술 특히 대전류 SAW 기법, SESNET 기법 등의 초대입열 용접기술, Metal cored wire나 TIME 기법에 의한 고능률 GMAW 기법 및 Robot 용접 등에 대하여 간략히 기술하였다. 이 용접기술들의 적용에는 대개 고가의 시설투자가 수반되나, 이는 생산성 증가에 따른 원가절감으로 충분히 상쇄될 수 있다. 그러나 상기된 용접기술들의 적용에 대한 성패는 용접장비의 특성, 용접조건의 확립, 모재의 특성 혹은 주변 자동화 기술 및 상호 종속적인 관계에 크게 의존된다. 따라서 가 강 구조물 제작업체에서는 세심한 주위환경 분석을 토대로 각 업체에 가장 합당한 용접기술을 선정 및 적용하여야 하겠다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.10
• /
• pp.934-939
• /
• 2011

This paper experimentally deals with the relationship between the ankle electromyogram(EMG) and walking motion in order to activate the ankle joint of a walking-assistance robot for rehabilitation. Based on the anatomical structure and motion pattern of an ankle joint, major muscles were selected for EMG measurements. Surface EMG signals were monitored for several human bodies at various stride distances and stride frequencies. Root-mean-squared magnitude of EMG signals were related with the walking conditions. It appeared that the magnitude of the ankle EMG signal was linearly proportional to the stride distance and stride frequency, and thus to the walking speed.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.10
• /
• pp.1174-1180
• /
• 2011

Not all line or point features capable of being extracted by sonar sensors from cluttered home environments are useful for simultaneous localization and mapping (SLAM) due to their ambiguity because it is difficult to determine the correspondence of line or point features with previously registered feature. Confused line and point features in cluttered environments leads to poor SLAM performance. We introduce a sonar feature structure suitable for a cluttered environment and the extended Kalman filter (EKF)-based SLAM scheme. The reliable line feature is expressed by its end points and engaged togather in EKF SLAM to overcome the geometric limits and maintain the map consistency. Experimental results demonstrate the validity and robustness of the proposed method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.675-678
• /
• 2002

A controller was designed generally using C or assembly languages on high-speed design controller. But, in this paper, DC servo controller is designed using the cord of the block-diagram of SIMTool. By the method, we can design, realized and analyzed a control system quickly in real-time. And we expect that the various plants of a robot vehicles are controled through the outside I/O board changing the structure of the block-diagram of SIMTool into AUTOTool. In addition, our developed system helps the most suitable automatic controller design and tester with hight-speed.

• Journal of Welding and Joining
• /
• v.14 no.4
• /
• pp.1-6
• /
• 1996

아크 용접작업은 그 작업 환경이 매우 열악하여 로보트를 이용한 자동화가 어느 분야보다 절실히 필요한 분야이다. 특히 인건비의 증가, 생산성 향상 등 여러 가지 측면에서 볼 때 용접 로보트의 도입이 요망되고 있다. 대표적으로 자동차 업계, 조선업계, 중장비 업계 등에서 아크용접 로보트를 필요로 하고 있다. 현재 국내에서 사용되는 대부분의 아크 용접용 로보트는 일본 및 유럽의 선진사들이 제조한 것들이 다. 일부 국내 로보트 제조업체들이 용접 로보트를 생산, 공급하고 있으나 대부분 선진사와 기술 제휴하여 국내에서 생산만하고 있는 실정이다. 그러나, 최근 들어 용접 용 로보트를 국산화하려는 노력들이 도처에서 보여지고 있다. 이 글에서는 아크용접 로보트 중에서 핵심 부분 중의 하나인 제어기의 구성과 그 필요기술, 기능등을 살펴 봄으로써 국내의 용접용 로보트 기술 개발 방향을 살펴 보고자 한다.

• The Journal of Korea Robotics Society
• /
• v.1 no.2
• /
• pp.107-116
• /
• 2006

We propose a planning algorithm to automatically generate a robust behavior plan (RBP) with which mobile robots can achieve their task goal from any initial states under dynamically changing environments. For this, task description space (TDS) is formulated, where a redundant task configuration space and simulation model of physical space are employed. Successful task episodes are collected, where $A^*$ algorithm is employed. Interesting TDS state vectors are extracted, where occurrence frequency is used. Clusters of TDS state vectors are found by using state transition tuples and features of state transition tuples. From these operations, characteristics of successfully performed tasks by a simulator are abstracted and generalized. Then, a robust behavior plan is constructed as an ordered tree structure, where nodes of the tree are represented by attentive TDS state vector of each cluster. The validity of our method is tested by real robot's experimentation for a box-pushing-into-a-goal task.